ENVEA Environmental Management Equipment
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for control and regulation of reagent in flue gas treatment and transport lines with very low material ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Cairnet® device is a real-time standalone and networkable air-monitoring station containing up to 6 Cairsens® microsensors and cellular communication within a waterproof enclosure. Thanks to its integrated manifold allowing a dynamic sampling, the measures are accurate and reliable. Electronic compounds are sealed & protected from moisture and corrosive ambient air. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed to meet ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flows with trend ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single analyzer. Fast and simultaneous measurements of up to 10 gases, available in 2 versions: NOx (CLD) and O2 (Paramagnetic) in 19’’ Rack or Tight box for low and ultra-low NOx monitoring. CO, CO2, SO2, HCl, HF, TOC, N2O (IR) + NOx (CLD) + O2 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sensor for continuous moisture measurement in dry bulk ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0-100%) after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc. The VM-3000 Mercury Vapor Monitor measures continuously the Hg concentration in air and other gases. It is used for laboratory applications as well as installed at places where mercury has to be monitored. It is a great tool for many different fields of applications in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs). AMESA-D is the most utilized dioxin monitoring ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any more ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by ENVEAbased in FRANCE
Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Micro-Venturi technology. The StackFlow 100 is a compact flowmeter for continuous measurement of velocity, temperature and static pressure in exhaust gas ducts ( stacks or flue gas ducts) using the Micro-Venturi technology. From these measurements, StackFlow 100 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Technically identical to the SM-4, this device is ideal for mercury determination at varying sites. The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with those of the stationary ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you