Only show results in Michigan? Ok

Health & Safety Applications

  • Premium

    Gas analyzers for odorization injection and control

    Mercaptans or THT are added to natural gas to make it smell and to make it detectable by the human nose (odorization process and odorization control in pipes). energyMEDOR ppm: 30 years’ experience.The compounds usually used to odorize natural gas vary from one country to another but are usually: Ter Buthyl Mercaptan (TBM) TetraHydroTiophene (THT) MethylEthylSulfide (MES) Analyze H2S and mercaptans concentration in natural gas (ppm).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Argon mass flow meters flow solutions

    Thermal mass flowmeters and controllers are ideal for Argon application where precision is key. Sierra specializes in accurate mass flow measurement and/or control of Argon gas. Popular applications range from general industrial process control, inerting and steel purification processes to name a few.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flow meters for the process control & manufacturing flow solutions

    Most chemical reactions are based on direct mass flow readings, and thus, Sierra`s immersible thermal mass flow meters and our volumetric vortex and multivariable mass vortex flow meters see extensive used in oil, gas and steam measurement. In addition, process liquid flows can be addressed with our non-intrusive clamp-on ultrasonic flow meters. Finally, our capillary thermal mass flow meters and controllers are perfect for semiconductor processing applications.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Tunnel solutions for the light sensors

    According to the International Committee on Illumination CIE recommendations, luminance should be monitored as the luminance contained within in a conical field of view, subtending an angle of 20º. It is recommended that a luminance photometer is mounted in the tunnel approach road approximately 120 - 200 metres from the portal, depending on the approach speed of the vehicles and their stopping distance. The purpose of monitoring the luminance at the portal is to adjust the level of light intensity inside...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Metallurgical industry online monitoring solutions

    Poorly controlled the concentration of gases such as CO, CO2, CH4 in the metallurgical industry cause poisoning, explosions and other accidents, and pose a serious threat to the safety in production. So it is essential to check the content of these gases for energy conservation, increase productivity, reduce energy consumption and protect the safety of life and product. The company`s gas analysis technology can accurately and reliably measure various industrial gas content, to provide a complete.

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Heavy metal analysis for laboratories

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.

  • Premium

    Industrial monitoring solutions for the flue gas desulphurisation areas

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Stack emissions monitoring

    Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone instruments.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Flue gas heavy metals on-line continuous monitoring solutions

    According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, etc.

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Flow Measurement instrumentation for maximize steam flow meter productivity

    We get it. All fingers point at you if productivity slips because of incorrect steam flow calculation. All you really want are flow instruments that are easy to install and provide highly accurate data. And work 24/7 with no downtime. Meet the original. In the ’90s, Sierra was the first multivariable mass vortex flow meter supplier in the world when we pioneered InnovaMass. Vortex volumetric flow and multivariable mass flow meters are the ideal technology for calculating steam flow. Our InnovaMass vortex...

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas analyzers and monitoring systems for Container monitoring

    Cargo containers and wooden packing materials are fumigated to control the spread of pests and micro-organisms. However, fumigant gases are toxic and present a danger to human health even at low concentrations. Additionally, products shipped in containers may release VOCs from the solvents, coatings and glues used in manufacturing processes, and the concentrations of these vapors may be significant in the confined space of the container. Gas measurements are required to protect the health of any workers involved...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Non-Exhaust vehicle emissions

    As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Dekati provides complete measurement solutions for brake wear and blow-by gas emission measurements and we can cover the complete particle size using only one measurement method – 6 nm – 10 µm with one measurement method.

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Flow Measurement instrumentation for digital flow meter air measurement solutions

    From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Desulfurization on-line continuous monitoring solution

    SO2 is one of several important pollutants in the atmosphere, SO2 from the atmosphere can stimulate people`s respiratory tract, abate respiratory function, and lead to respiratory resistance decreased, induce various inflammation of respiratory tract, harm to human health. SO2 also is harm to many plants. SO2 and its generated sulfuric acid mist can corrode metal surfaces and cause damage to paper products, textiles, leather products. It may also form acid rain, which is serious harm to the ecological system and...

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Industrial monitoring solutions for the de-NOx plants areas

    In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Online monitoring solutions for the determination of calcium and magnesium in hydrochloric acid

    The purpose of monitoring calcium and magnesium levels in hydrochloric acid is to control brine acidification in chlorine electrolysis, which can be precisely monitored by means of AppliTek’s UPA Universal Process Analyzer.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Gas monitoring for industrial processing applications

    Temperature measurements play critical roles in a number of diverse industrial processes. AMETEK Land provides expert solutions to support product quality, process efficiency, safety and emissions control. Our industry-leading non-contact measurement instruments deliver essential temperature data for industry sectors including metals, non-wovens, paper and plastics. We also supply effective emissions monitors and conveyor belt scanners. AMETEK Land has more than 70 years’ experience in providing comprehensive...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Premium

    Visual inspection solutions for the borescope for engine inspection

    Visual inspections of engines and other hard to visualize places are an important part of ongoing automotive maintenance. Rigid and flexible borescopes are a great way to visually inspect engines without having to dismantle the engine block, as they allow you to remotely visualize dark, small, and hard to reach places. Routine inspection with a borescope will allow you identify problem areas and to replace or repair parts before they are causing problem. Flexible borescopes can also be used to track through parts...

    By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Premium

    Online monitoring solutions for the chlor-alkali industries

    During the last two decades AppliTek was able to build up a unique expertise in the design, manufacturing and commissioning of on-line analyzer systems in the chlor-alkali industry. Our know-how in the critical processes is contributing to the Responsible Care Principle, while our goals for your production plant are self-evident: assure safety, enhance efficiency and increase net profits.

    By AppliTek NV based in Nazareth, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you