Fire Safety Applications

31 Results found
Only show results in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

Stack Testing for Cement Kilns

by AirSource Technologies, Inc.     based in Shawnee, KANSAS (USA)

CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

Ground Penetrating Radars (GPR) for Forensics and Military

by Transient Technologies LLC     based in Kyiv, UKRAINE

Police can use GPRs in different forensic investigations (search for hidden burials, underground hiding places and passages etc.).  Military uses of GPR include location and detection of buried explosive devices and land mines.

Pulsair`s industrial mixers for biodiesel fuel industry

by Pulsair Systems, Inc     based in Bellevue, WASHINGTON (USA)

Pulsair Systems manufactures the most efficient and effective storage tank mixing process for blending and agitating biodiesel fuel. The efficient Pulsair mixing process is well suited for the high viscosity and heavy fluid characteristic of biodiesel. Pulsair offers a complete line of off the shelf biodiesel fuel mixers and agitators for mixing in a 55-gallon drum or larger 250 - 1 million+ gallon tanks for biodiesel fuel storage or production. Pulsair biodiesel fuel mixers are explosion proof and safe for biodiesel mixing. Biodiesel is a flammable product and the fire risks are reduced when using the Pulsair mixing process because our mixers do not require electricity at the mixing site. This improves the overall safety of the biodiesel production process and biodiesel fuel storage tank mixing and agitation.

Fire Weather Monitoring

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

FTS is the world leader in environmental monitoring solutions for fire weather. FTS stations are in use by every one of the top 50 government forest management agencies in every corner of the United States and Canada. No one else dedicates as much of its research and development efforts to the needs of fire weather professionals. FTS portable and fixed-site weather stations set the standard for reliability and simplicity of operation, maintenance, and installation. As a manufacturer, we design and engineer the leading datalogger that is approved and fully supported by the NIFC Remote Sensing Fire Weather Support Unit (RSFWSU). Our G5 GOES / Meteosat transmitter is recognized as the most reliable GOES technology available, and is licensed for use by other environmental monitoring equipment manufacturers.

Fire Weather Networks , Wildfire Supression

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

Every year, 35 million hectares —or about 1% of the world’s forests— are lost to wildfire. Recently in North America the area burnt by wildfires has increased sharply, while regions like Southeast Asia and South America have seen a rise in the number of land-clearing fires and other escaped wildfires in equatorial forests. The extraordinary costs of fire suppression activities are matched only by the damages to property and ecosystems these fire wreak—in South America, this loss is estimated at $1.6 billion annually. In the US, damages from major fires were found to account for as much as 95% of total costs from fire. Advances have been made through the use of basic weather data from meteorological stations. In years past, fire agencies used this data to develop fire danger rating systems that helped them predict, prevent and suppress fires. How can fire management agencies improve their ability to predict, prevent and fight wildfires? By installing dedicated fire weather network.

Workwear & protective fabrics for mining industry

by Arvind Limited     based in Dist : Gandhinagar, INDIA

Where protection from flash fire and explosive dust exposure is required, Arvind PRO1 products can help Saveprecious human lives. The mining environment creates a number of unique hazards including heat stress, greatly affecting operator motor skills and static electricity which could ignite an environment mixed with air and explosive mining dust.

Smoke generator device for fire training, emergency evacuation & BA training

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

The Fire Training Range, designed and manufactured by Concept, has been developed to add realism to training scenarios or any type of fire safety training. For complete portability, unbeatable reliability and quality smoke output, the Colt 4 Turbo is in a class of it`s own. For large scale applications the ViCount is the ultimate choice for fire training. With almost 50 years experience in the generation of artificial smoke for fire brigades, Concept are in an unrivaled position to supply the equipment and advice best suited for your application!

Dewatering of explosive / corrosive media for waste management industry

by BELLMER KUFFERATH Machinery GmbH     based in Düren, GERMANY

In customer-specific chemical processes, explosive and corrosive solvents are used to systematically change the stock characteristics of e.g. pulp or plastic which calls for appropriate measures to protect the machine as well as the environment. To meet such requirements, BELLMER KUFFERATH Machinery has adapted their screw presses` proven functional concept to suit special requirements, such as:

Asphalt Mixing Smoke Filtration

by Zhejiang Grace Envirotech Co., Ltd     based in XIAOSHAN, CHINA

Nomex Filter Bags Application:    Nomex Filter Bags is mainly used in cement industry, asphalt industry, metallurgical industry,steel mill and tobacco industry for flue gas purification. Performance:    Nomex Filter Bags continuous operating temperatures is up to 200°c, instant service temperature is up to 240°c.     Nomex Filter Bags fire retardant performance is excellent,    Corrosion resistance and alkali resistance is good,    Excellent thermal stability, excellent abrasion resistance and flexural resistance. Hydrolysis resistance is poor, when SOx and vapor in flue gas or dew point is frequent, it would greatly reduce its service life.

Measurement solution for fire testing for the railway industry

by Protea Limited     based in Middlewich, UNITED KINGDOM

A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

Methane Sensing for Coal Mining

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Application: The majority (around 60%) of the coal seams currently being extracted worldwide are so far underground that open cast mining cannot take place and, therefore, underground mining techniques need to be used. Consequently, workers have to enter and work in confined spaces. One of the major problems that this creates is the dangers from Methane (CH4) gas which occurs in Mine gas.

Odor Control for Tank Cleaning

by OMI Industries (OMI)     based in Long Grove, ILLINOIS (USA)

When It Comes To Odor Management, Simply Cleaning The Tank Isn’t Enough To Remove The Odors

Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

Oil skimmers for petro chemical industry

by Ambar Oil Skimmers     based in Westwego, LOUISIANA (USA)

The Mop type Oil Skimmer has many submissions in refinery plants. Some applications are comprised of cooling ponds, waste water, storage tanks etc. Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water applications.

Smoke generator device for hot fire training

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

Concept`s ViCount smoke generators are installed throughout the world in quality hot fire training centres - providing the most realistic artificial smoke effect possible. They are also used to add smoke during carbonaceous burns. The majority of fire training centres and schools use gas to replicate the appearance and heat of a real fire but one thing gas doesn`t produce is smoke! The ViCount range of oil-based smoke generators from Concept produces a smoke with a temperature resistance up to 200C, so realism can be added to Hot Fire simulators effectively and safely.

Smoke generator device for maritime shipboard fire training

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

A fire at sea can be devastating. Ensuring that crews are trained in safe but highly realistic conditions can help them tackle a real fire with greater speed, efficiency and confidence - minimising the damage to the ship, its cargo and of course risk to life.

Sludge - slurry dewatering solutions & filter press technology

by Bilfinger Water Technologies GmbH     based in Aarbergen, GERMANY

DIEMME Filtration has the correct solutions for all problems of slurry - sludge dewatering, because every DIEMME FILTRATION filter press, is projected in connection with the chemical physical characteristics of the sludge.

Gas Detection Solutions for Pipeline Leak Detection

by Boreal Laser Inc.     based in Edmonton, ALBERTA (CANADA)

Natural gas pipeline owners require improved routine monitoring of pipelines for safety, economic and regulatory reasons. Leaking natural gas can cause explosions leading to loss of life and property. Loss of product through undetected leaks dramatically reduces a pipeline operator’s profitability.

Restoration

by Omnitec Design, Inc.     based in Mukilteo, WASHINGTON (USA)

Restoring structures after floods and fires is a constantly evolving industry. In addition to keeping up with industry best practices for health and safety of both the contractors and the building residents post restoration, it is also important to be working with modern and reliable restoration equipment. Utilizing Omnitec and OmniAire products will allow you to take advantage of the latest best practice methods with equipment you know will work reliably and safely. Airborne contaminates and dust is a significant consideration for almost any restoration project. Did you know that studies have shown a substantial increase in air particulate matter during the drying process? Not only does dust and contaminates affect your worker’s safety, but also the safety of the post-restoration occupants. Just increasing the air circulation doesn’t remedy the situation and, without adequate filtration, may actually create more problems.

Land-based Sprinkler Systems

by DESMI A/S     based in Noerresundby, DENMARK

Transportable pump units The pump and motor come built together in a compact unit that is easy to move. Typically, self-priming pumps are used. The pump can be combined with electric motor, diesel or gasoline engines including battery and fuel tank. Transportable pump systems can be supplied as explosion-proof. Complete container The complete sprinkler or fire pump system can be supplied mounted in a container with all internal piping leading through to the container wall ready for assembly with the supply line and pressure pipe. Stationary sprinkler pumps with electric motor or diesel engine The complete unit comes on a base plate construction, and as pumps are also designed for diesel operation, you can choose between assembly with electric motor or diesel engine. The pump and motor are built together on the base plate via a flexible coupling.

PTR-MS systems for security and safety purpose

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

Illicit substances real-time detection with IONICON PTR-MS. PTR-MS combines all features that are needed for analyzing dangerous and illicit substances like explosives, chemical warfare agents (CWA), toxic industrial chemicals (TIC) and drugs.

Need help finding the right suppliers?

Let the XPRTs do the work for you