Oil Spills Applications

51 Results found
Only show results in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Oil Spills ×

High performance separation system for lube oil industry

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been developed to address the inherent deficiencies of the conventional coalescers.

Geosynthetic Lining for Secondary Containment

by CETCO     based in Hoffman Estates, ILLINOIS (USA)

GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

Sustainable solutions for oil & gas industry

by thinkstep     based in Leinfelden-Echterdingen, GERMANY

Protecting Earth’s environment is becoming increasingly difficult as the development of emerging economies and industrial growth continue to accelerate and draw more demand for energy resources. At the same time increased legislation, consumer preference for greener energy and competition increasingly drive the need for more sustainable extraction, processing, transport and use of conventional energy resources. None more so is this true than for the Oil and Gas producers who must now develop strategies and practices to enhance their sustainability performance, economic position and social standing.

Eliminating the Environmental foot print for Offshore and On shore oil rigs

by OSEI - Oil Spill Eater International, Corp     based in Dallas, TEXAS (USA)

OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

Coastal & Nearshore

by DESMI A/S     based in Noerresundby, DENMARK

Coastal & Nearshore For coastal and nearshore use DESMI provides the well known Ro-Boom product but in smaller sizes whilst maintaining the integrity of the larger product offerings. Alternatively, you may want to consider SPI or a lighter weight boom if there are deployment and recovery considerations or restrictions. Under these circumstances, the Troilboom AF (Air Filled) offers a light weight rapid response solution. It is manufactured as standard in bright orange polyurethane fabric offering durability and strength. Top tension wires are also available to enhance performance. A wide range of combination skimmers have been developed for the coastal environment. These include weir, brush, disc and belt recovery systems with on-board pumps. This results in systems being able to recover a wide range of oils including emulsions and weathered compounds. An example of this is the Terminator skimmer system.

Oil spill recovery

by DESMI A/S     based in Noerresundby, DENMARK

As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic environment. In addition, we offer a range of ‘fail safe’ fire booms for use in controlled burning of oil in ice.

Microbial formulations for industrial sector

by Bioscience, Inc.     based in Allentown, PENNSYLVANIA (USA)

MICROCAT microbial formulations from Bioscience, Inc., are blends of specialized, naturally occurring microbes and other ingredients that work together to solve the problems associated with wastewater treatment from heavy process industries. By augmenting existing microbial populations, MICROCAT products naturally enhance the biodegradation of wastewater from refineries, pulp mills, chemical plants, steel mills and textile plants. When properly applied as recommended by Bioscience’s team of seasoned professionals, MICROCAT bioaugmentation formulas can result in more stable and efficient wastewater treatment plant operation and better overall effluent quality for their difficult-to-treat wastewaters.

Chemical Water Treatment for membrane treatments

by Kurita     based in Ludwigshafen, GERMANY

Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

Oil Mist Separators for Shipbuilding

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

A  Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination. Throughput: 1,200 Nm³/h @ 50 Hz.

Pollutant Decontamination for the Wastewater Treatment Industry

by NANO IRON s.r.o.     based in Rajhrad, CZECH REPUBLIC

All described properties of Fe(0) nanoparticles can be even used for decomposition of pollutants contained in the waste water, mainly for treatment of industrial sewage and hutch water. The usage of nanoiron can represent a significant qualitative step in the classical technologies of water treatment including drinking water. The extremely reactive iron nanoparticles thus offer a possibility to solve long-lasting problems with a high content of uranium and arsenic in a variety of localities in the Central Europe. They can be also used for a reduction of the content of heavy metals, nitrates and phosphates in the drinking water. Just these inorganic pollutants, which are hardly or expensively removed by standard technologies, are effectively removed by Fe(0) nanoparticles. 

Sand and Dust control/stabilisation

by Technical Absorbents     based in Grimsby, UNITED KINGDOM

PermeatecDS is a unique polymer technology developed by TAL and is aimed specifically at the control of dust and stabilisation of loose, granular materials. PermeatecDS can be applied to such materials – as an aqueous surface spray – to control dust and provide a hard, durable surface. In addition, it can be mixed directly with loose, granular material to provide a solid block of material. PermeatecDS is a complex acrylate-based polymer system, designed to be dispersed in water, aiding application and improving safety/handling. The polymer is able to coat and bind loose materials, forming a complex web of interlocking particles and polymer, which – when dried – form a hard, durable material. The ability to change application rates, provides the user with precise control and allows stabilisation levels, strength and durability to be tailored as required.

Spill containment for municipal / military

by Millennium Enterprises, Inc. (MEI)     based in Marietta, GEORGIA (US) (USA)

The SafeGuards line of spill containment products are used in various municipal/military applications ranging from fuel truck containment; fuel and water bladders; maintenance areas to custom solutions for unique applications.

Spill containment for oil & gas pads

by Millennium Enterprises, Inc. (MEI)     based in Marietta, GEORGIA (US) (USA)

Our SafeGuards line of containments are used extensively on Oil & Gas drilling and work over pads under frac tanks; fracking pumps; diesel pumps; light towers; Gen-Sets; chemical delivery trucks; tote and drum containment; emergency response needs; spill kits; fuel delivery tankers and virtually all other pad equipment.

Rugged Mobile Technology for Oil and Gas Industry

by Handheld UK and Ireland Ltd     based in Leamington Spa, UNITED KINGDOM

Oil and gas personnel spend a large amount of time in remote pipeline locations and on oil rigs — environments that aren’t exactly gentle on technology. Our handhelds are tested to military standards for ruggedness, yet they’re also extremely compact, ergonomic and user-friendly. Handheld products allow you to easily capture data associated with resource-monitoring and transport tasks, and keep all your important information secure while you focus on doing your job efficiently and safely.

Flaring Solutions for the Midstream Oil and Gas industry

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

At ABUTEC, we understand the unique challenges that accompany transporting oil to refineries. Among those challenges is environmental responsibility to the communities in which oil and gas companies operate. Our enclosed combustors meet or exceed increasingly stringent state and federal regulations and allow companies to operate in extreme conditions.

Wilsa ElectroWaveTM Conditioning - Non-chemical water conditioning, break emulsions, enhance recovery

by Hudson Industries     based in Vienna, OHIO (USA)

Hudson Industries (a licensed partner) is now offering the patented Wilsa ElectroWaveTM Conditioner (EWC) for non-chemical water conditioning that provides enhanced oil recovery up to 99.999% with the power to break difficult emulsions. The Wilsa Effect is targeted at polar fluids, such as water. The Wilsa EWC directly targets the surface and interfacial tension of water molecules which breaks emulsions and forces the water to reject foreign matter such as oil and suspended solids. Furthermore viscosity is greatly reduced which allows the now coalesced oil to exit the water column with less friction, thus Stokes Law is fundamentally enhanced and retention time is greatly reduced. Combine the Wilsa EWC with your existing separation equipment or pair it with Hudson Coalescing Separator for maximum oil recovery/ removal. Contact us today for more information about Hudson Separators and Wilsa ElectroWaveTM Conditioning.

Hydrocyclones for automotive applications

by FLSmidth KREBS     based in Tucson, ARIZONA (USA)

Krebs cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning solution.

CleanAll Heavy

by PETROGLOBE CO.     based in Cairo, EGYPT

Application : OIL SPILL DISPERSANT :THE BEST SOLUTION TO ELIMINATE THE SEA WATER POLUTION BY SAFE WAY Huge oil tanks. Oil tankers and commercial vessels. Harbors (land ,marine &air strips) Excavators oil wells. Petroleum Rigs and pipes

Cloud software solutions for bulk petroleum storage

by Titan Cloud Software Company, LLC     based in Brentwood, TENNESSEE (USA)

Mitigate regulatory risk. Run your AST facilities at peak efficiency. Bulk petroleum facilities face onerous environmental demands. Demands that if not met consistently and with precision, could cost you tens of thousands of dollars per day and even threaten to hobble your operation. Titan automates even the most thorny areas of AST regulatory compliance, from spill prevention and ground water protection, to alarm monitoring and testing that meets API standards. So you`ll be on top of every test & inspection date, every critical document and equipment spec, and every maintenance activity to ensure your business keeps pace with its opportunity for growth.

Need help finding the right suppliers?

Let the XPRTs do the work for you