Only show results in Michigan? Ok

Gas Dilution Sampling equipment for Monitoring and Testing

  • TSI - Model 3302A - Aerosol Diluter

    Aerosol Diluter 3302A reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a tandem ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluter Product line

  • M&C - Model SP2000-H/DIL, 115 V - Gas Sample Dilution Probe

    Gas sample dilution probe type SP2000-H/DIL with external ceramic filter type S-2K150, filter porosity: 2 µm, electrically heated external filter 0 to 180 °C adjustable by an integrated thermostat, overtemperature limiter with reset key responding at +30 °C above Tset and undertemperture alarm with potential-free status-alarm contact ...

    By M&C Products Analysis Technology, Inc. based in Ventura, CALIFORNIA (USA). from Gas Sample Dilution Probe Product line

  • Aerosol Dilution System - Model DIL 554 - Aerosol Diluter

    The dilution system DIL 554 is designed to accurately dilute aerosols to produce a defined particle concentration. It has a stainless-steel housing and is battery-operated. The main application is the verification of test aerosols for testing clean rooms. EN ISO 14644-3 defines the necessity of appropriate dilution systems when using test aerosols ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Diluter Product line

  • Model 3306 - Impactor Inlet

    The Impactor Inlet is an accessory for the Aerodynamic Particle Sizer® (APS™) spectrometer. It combines a single-stage impactor with a filter to take a size-segregated sample. It then directs a small, representative sample of the initial test aerosol (diluted at 80 to 1) into the APS spectrometer for size-distribution measurement. The ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Impactor Inlet Product line

  • Model 322 - Gas Dilution Calibrator

    The Model 322 Dilution Calibrator is a state-of-the-art precision instrument that produces precise, software selectable concentrations of multiple gases for the calibration of air quality analyzers. Precise Mass Flow Meters control the gas output to the selected concentration. A built-in ozone generator provides a very repeatable ozone output ...

    By Tanabyte Engineering, Inc., based in Riverview, FLORIDA (USA). from Gas Dilution Calibrator Product line

  • Model SP2000-H/DIL 230V - Dilution Probe

    Gas sample dilution probe type SP2000-H/DIL. With external ceramic filter type S-2K150, filter porosity: 2µm, with electrically heated external filter 0-180°C adjustable by an incorporated thermostat, over temperature limiter with reset key at +30°C Tsetting and low temp. alarm with potential free status-alarm contact at -30°C ...

    By M&C TechGroup Germany GmbH based in Ratingen, GERMANY. from Dilution Probe Product line

  • Palas - Model VKL 10 - Aerosol Dilution Systems

    The welas VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for powders and dusts. Dilution factors of up to ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Aerosol Dilution Systems Product line

  • Aerosol Diluter Model 3302A

    Our Aerosol Diluter reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS™) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a tandem ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluter Model 3302A Product line

  • M&C - Model SP2000-H/DIL, 230 V - Gas Sample Dilution Probe

    Gas sample dilution probe type SP2000-H/DIL with external ceramic filter type S-2K150, filter porosity: 2 µm, electrically heated external filter 0 to 180 °C adjustable by an intgrated thermostat, overtemperature limiter with reset key responding at +30 °C above Tset and undertemperature alarm with potential-free status-alarm contact ...

    By M&C Products Analysis Technology, Inc. based in Ventura, CALIFORNIA (USA). from Gas Sample Dilution Probe Product line

  • Odor Substances Monitoring

    Odor substances monitoring can be provided by OdoWatch system developed by Odotech, Inc. It meets the requirements for continuous monitoring systems operating at the odor site of operators of dumps, waste composing, sewerage plants, industries and other originators of unpleasant odor. Permanent measurement and emission development forecast secures ...

    By Envitech Bohemia s.r.o. based in Prague 6, CZECH REPUBLIC.

  • Environics - Model 4000 - Series 4040 VOC Gas Dilution System

    The Environics® Series 4040 VOC Gas Dilution System is a microprocessor based gas dilution system designed for the preparation of calibration standards used for VOC (Volatile Organic Compounds) monitoring programs. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the ...

    By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Series 4040 VOC Gas Dilution System Product line

  • Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

    The KHG 10 series of heatable dilution system builds upon the VKL series ejector principle. In addition to the advantages of the VKL series, the KHG series dilution system is configured to be heatable to 150°C (optionally up to 200°C) and is additionally pressure-resistant up to 10 bar overpressure. Isothermal and isobaric dilution can ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Heatable Aerosol Dilution System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you