Amcon - Model SP Series -Sludge Dewatering and Drying System
This system can convert waste activated sludge and chemical sludge into dried sludge with a water content of 10 to 40%, reducing the amount of the waste sludge. High thermal efficiency is achieved with the direct contact of the the dewatered cake to the heat source. The unique double layered drum structure ensures a sufficient drying area while providing a compact design.
Significant reduction of waste sludge volume
By drying the dewatered cake with a water content of about 80% to the water content of 10 to 40%, the dryer significantly reduces the amount of waste sludge. Your sludge disposal cost is greatly reduced.
Compact design and easy installation
When combined with the VOLUTE™ Dewatering Press, the dewatered cake discharged from the dewatering machine is fed directly into the dryer which produces the dried cake continuously. Large-scale operating systems such as storage hoppers, large drying tanks, and motors are not required.
In addition, the unique double layered drum structure ensures sufficient drying area.
Its compact design makes it suitable for small facilities, and the installation is also easy.
Sludge discharged in flake form for easy handling
Dry sludge is continuously discharged in a flake form.
Discharging the dried sludge in this form reduces the scattering of the sludge and eases handling.
In addition, dried sludge with low water content is less likely to decompose than dewatered cake, making it less likely to produce foul odors when temporarily stored.