- Home
- Equipment
Refine by
Aer Environmental Equipment & Supplies
31 equipment items found
Manufactured by:Aer-Flo, Inc. based inBradenton, FLORIDA (USA)
Staked Barriers are continuous panels of impervious vinyl-polyester fabric that, installed correctly, can contain stormwater runoff or re-direct it to proper channels or retention areas. On-land installation is similar to that of silt fence, with 8 inches below grade and 36 inches above grade attached to stakes. Staked Barriers can also be installed in up to 18 inches of ...
Manufactured by:Aerservice Equipments srl based inLegnaro (PD), ITALY
The duct systems and sliding bearings are designed to allow the extraction of exhaust gases of vehicles in general with the following applications: In revising or testing installations, with moving vehicles (following the plants) to which are attached the suitable nozzles coupled to the exhaust, relied to suction system. Centralized systems which serves the lifting platform or multiple working ...
Manufactured by:Aer-Flo, Inc. based inBradenton, FLORIDA (USA)
Includes everything needed to anchor Tough Guy® Floating Turbidity Barriers… Anchor, rope, chain, shackles, thimbles, anchor buoy, and positioning/retrieval buoy… EVERYTHING! Floating turbidity barriers installed in moving water, tidal areas, and windy areas must be anchored to stay in position. Aer-Flo offers complete factory-assembled anchoring systems to make jobsite ...
Manufactured by:Aer-Flo, Inc. based inBradenton, FLORIDA (USA)
Aer-Flo, Inc.’s Lighted Navigation Buoys meet or exceeds the U.S Coast Guards recommendation for Floating Turbidity Barriers. Due to the proprietary nature of this product, please call Aer-Flo Customer Service for additional ...
Manufactured by:Aerservice Equipments srl based inLegnaro (PD), ITALY
The “ELE” portable system is designed to solve problems of vehicle exhaust gas extraction during engine testing procedures in enclosed places not equipped with fixed wall or ceiling-mounted extraction systems. Once extracted the gases are ejected through a supplied flexible hose. The range includes models and accessories specifically designed for use in motorcycle, car, truck and ...
Manufactured by:Aer-Flo, Inc. based inBradenton, FLORIDA (USA)
TURBIDTY BARRIERS are a BMP designed to restrict the flow of sediment-laden stormwater runoff from a construction site, to keep it contained in a limited area, and allow the sediment to settle out before being carried into adjacent or joining watercourses. TOUGH GUY® Turbidity Barriers are manufactured by AER-FLO, Inc., the world’s largest producer of these critical ...
Manufactured by:AER Control Systems based inNorth Haven, CONNECTICUT (USA)
The CYC Cyclone Separators are among the most efficient and cost-effective dust collectors available. CYC Cyclones are offered in capacities from 800 CFM to 13,000 CFM and efficiently remove moderate- to large-sized particles from the airstream. Fans are self-cleaning, material-handling, radial blades designed to deliver peak airflow while the low horsepower conserves energy. ...
Manufactured by:Pure Water Products, LLC (PWP) based inDenton, TEXAS (USA)
115 Volt Aeration System. Consists of 115 volt air pump, 115 volt Maxi-Vent, 10" X 54" aeration tank with vent head, plus all needed accessories for installation. Use this voltage if installing with a timer or flow switch (see 115 volt control options). ...
Manufactured by:AER-USA based inLake Placid, FLORIDA (USA)
The Flash unit is designed for both continuous and emergency applications, offering a dual functionality of vertical circulation and high dissolution rates without creating water turbulence. It can perform effective oxygen diffusion at two different depths: a direct depth of 3 meters and an induced depth of 6 meters. Additionally, it facilitates destratification up to 3 meters deep. The unit is ...
Manufactured by:Flextraction Limited based inMelton Mowbray, UNITED KINGDOM
Portable cartridge unit for welding fumes, fumes from manual plasma cutting operations and grinding ...
Manufactured by:Aerservice Equipments srl based inLegnaro (PD), ITALY
APPLICATIONS Localized exhaust gas suction system for motorcycles, cars, trucks and vans. Wall or ceiling positioning, in centralized systems or individual extractor fan unit on ...
Manufactured by:AER Control Systems based inNorth Haven, CONNECTICUT (USA)
Mounted In-Line to the Ductwork. Multiple Sizes Available. Can be mounted Vertically or Horizontally (Downflow vertical optional). Pre-Filtering Device. Removes 85% to 95% of coolant before entering the mist collector. Extends filter life dramatically, double filter life. Allows coolant to be recycled directly back to reservoir. Virtually maintenance free – NO MOVING PARTS. ...
Manufactured by:AER Control Systems based inNorth Haven, CONNECTICUT (USA)
The DD 800 is designed to capture low levels of non-explosive and non-flammable metal dust. Good for de-burring and sanding. The filters are cleaned by a foot pedal which shakes the dust off the ...
Manufactured by:AER Control Systems based inNorth Haven, CONNECTICUT (USA)
The HCF Series is a ceiling hung collector which has four horizontal cartridge filters used for dust or fume collection. With the addition of extraction arms mounted to the side of the unit the HCF is a great collector for weld fume. By adding an ambient inlet this unit can be hung from the ceiling to circulate the air inside of a manufacturing shop. ...
Manufactured by:AER Control Systems based inNorth Haven, CONNECTICUT (USA)
The vertical media collector is a modular filtration unit, typically used to filter mist, dust, smoke, fume, gas, and vapor. Several sizes are available with airflows ranging from 500cfm and higher. ...
Manufactured by:Aerservice Equipments srl based inLegnaro (PD), ITALY
This version is provided with an extractor fan and special hoses for fumes and exhaust gas extraction during special engine tests on vehicles with APF regeneration for work temperatures till 400°C (APF) and 1000°C ...
Manufactured by:AER-USA based inLake Placid, FLORIDA (USA)
The Brio system, designed as a more compact version of the Rio, serves a dual purpose of circulating and oxygenating extensive water bodies. Offering flexibility, it can be positioned at depths varying from 1 to 32 feet, adjustable for upward or downward angles, ensuring optimal water movement and aeration. The system is adaptable to different electrical setups, featuring motor specifications ...
Manufactured by:AER Control Systems based inNorth Haven, CONNECTICUT (USA)
AER’s filtration units reduce airborne mist from CNC Machining including cutting and grinding; and control die lube spray from die cast ...
Manufactured by:Aerservice Equipments srl based inLegnaro (PD), ITALY
The exhaust gas extraction systems can be installed only in cases wherein the construction of the new repair shop has not yet seen the completion of masonry work and flooring in the work ...
Manufactured by:Aer-Flo, Inc. based inBradenton, FLORIDA (USA)
Helps protect waterways from undesirable VEGETATION and unsightly DEBRIS. Combines the latest technologies in floating booms and hydro-weed containment to help control plants that spread by fragmentation, including: Hydrilla, Hyacinth, Eurasian ...