- Home
- Equipment
Refine by
Agcos Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
The ACF-4M equipment is intended for carrying out audiomagnetotelluric and frequency soundings using natural and controlled sources electromagnetic ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Technical Characteristics: Frequency range, kHz: 10-1000. Transfer constant, mV/nT: 25. Dimensions and weight, not more than: 40 mm (diameter), 240 mm (length), 0.5 Kg (weight). Voltage of external power supply, V: +/- 8. Current consumption, mA: 30. Cable length, m, not more than: ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Multichannel electroporspecting receiver IMVP is used to make researches by induced polarization method (IP) in frequency and/or temporary domain, direct current (impedance) method (resistance method), frequency sounding method and differential-normed electroprospecting method. ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Large contact area. Active contact surface of the electrode is up to 84 cm2 due to use of special shape of the porous ceramic membrane: low noise, high stability, compact design. Simple and convenient to use and maintain. Compact design allows to transport enough electrodes and electrical lines for several data acquisition units in one small plastic tool box. The electrode can be grounded in ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Large contact area. Active contact surface of the electrode is up to 84 cm2 due to use of special shape of the porous ceramic membrane: low noise, high stability, compact design. Simple and convenient to use and maintain: Compact design allows to transport enough electrodes and electrical lines for several acquisition units in one small plastic tool box. The electrode can be grounded in seconds. ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
A new environmentally friendly non-polarizing electrode ASCE-84-AG is the latest AGCOS’s electrode design, having improved technical characteristics due to usage of silver reagent. This model has lower noise in comparison to other AGCOS electrodes and almost “0” polarization, environmentally clean solution and the same convenience of usage and maintenance. ASCE-84-AG can be ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Switching module COMx64 is specially designed to be used with compact multifunctional EM receiver MARY-24 for shallow resistivity imaging. This module features an internal switching board for 64 potential electrodes. Four strings of cable with 16 electrode take-out each are connected to switching module. System is designed for surveys with Pole-Dipole Array. One electrode is moved manually. ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
All-in-One multifunction geophysical EM receiver GEPARD-8 is intended for sensitive and accurate registration of electrical and magnetic fields in wide frequency range, both in natural source and control source modes and wide exploration depth intervals. System works with variety of sensors, including grounded and non-grounded electric lines, high frequency and long period induction coil magnetic ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Geoelectric transmitter «ASTRA» is designed to create electromagnetic field during geophysical surveys by means of direct current resistivity, induced polarization, frequency-domain (using separate component or impedance measurements) and other electromagnetic methods. The transmitter can be applied to solve only civil tasks, connected with the study of electrical properties of soils ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
2AUSS-07A systems are manufactured by Advanced Geophysical Operations and Services Inc. and are designed for carrying out shallow marine EM surveys at depths of up to 100 meters. These systems are based on the use of high-precision and highly-sensitivity geophysical equipment for the EM surveys manufactured by Phoenix Geophysics Ltd. They are built in such a way, that the equipment can easily be ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
MT-5(CS) – geological mapping, exploration, hydro geological and building construction works, environmental ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
RMT-M equipment is intended for mobile (using car or off-road vehicle for on shore conditions and boat on water areas) radiomagnetotelluric (RMT) soundings method using electromagnetic fields of remote radio transmitters. On data of measurements of horizontal and mutually-orthogonal component of electrical and magnetic fields curves of apparent resistivity and impedance phase are calculated, ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
RMT-F equipment is intended for radiomagnetotelluric soundings using electromagnetic fields of remote radio transmitters. On data of measurements of horizontal and mutually-orthogonal component of electrical and magnetic fields curves of apparent resistivity and impedance phase are calculated, which are used for inversion and plotting of geoelectric cross section. ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
AT-100 current source is a lightweight, compact and portable geophysical transmitter with wide range of the output frequencies and currents, allowing large variations of the load impedance. The unit has a stabilized output current up to 1A for driving inductive loads or grounded dipoles. AT-100 is powered by 12V external battery. AT-100 has GPS synchronization, external sync signal push-pull ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Transmitter GTS-1 is intended for work from an alternating current single-phase network with the voltage 220 V and frequency 50 Hz on loading with the resistance 10 - 1000 ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Frequency range, Hz: 0.1-4000. Transfer constant: For frequency range 0.5-3000 Hz: 80 mV/nT, For frequency range 0.1-0.5 Hz: 160 mV/(nT*Hz). Noise level, fT/Sq. root of Hz: For frequency 10 Hz: 12, For frequency 1000 Hz: 2.5. Dimensions and weight, not more than: 70 mm (diameter), 1110 mm (length), 5 Kg (weight). Voltage of external power supply, V: +/- (8-10). Current consumption, mA: 30. Cable ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Lightweight, rugged, easy to transport and easy to install with AGCOS ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Lightweight, rugged, easy to transport and easy to install with AGCOS ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
Measuring instrument MARY (Multifunctional receiver for electrical and electromagnetic prospecting) represents the newest development in the field of creation of the portable geophysical equipment. Compactness and simplicity of use of the device are combined with opportunities which until recently were inherent in only large-sized electroprospecting stations. The Scope of a measuring instrument ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
SMMT receivers are designed for carrying out shallow marine EM surveys in transition zones at depths of up to 50m. They are based on high-precision and highly-sensitive land geophysical equipment for electroprospecting surveys and are built in such a way, that equipment can easily be used for land surveys or for simultaneous marine and land EM data acquisition as ...