- Home
- Equipment
Refine by
Colasit Environmental Equipment & Supplies
9 equipment items found
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
The Colasit CMVpro® plastic radial fan sets new standards in efficiency of plastic fans and achieves a noticeable reduction in your operating cost, even compared to the best competitors. In addition to a total mechanical efficiency of up to 83 %, the CMVpro® complies with all current and future environmental ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
The Colasit CMVeco radial fan has been produced since 2009 and is a proven and absolutely reliable plastic fan. The CMVeco is available in various materials and drive concepts, and can be supplied for most applications with chemically aggressive gases and exhaust ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
The Colasit CRDV-R plastic duct fan can be installed both horizontally and vertically in aligned pipe systems. The reliability and stability of the plastic duct fan are proven by the high demand and many years of use in ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
Performance : Flow rate: min. 2'900 m3/h to max. 132'000 m3/h. Static pressure: min. 200 Pa to max. 4'000 Pa. Efficiency: max. 68 %. Inlet-Ø: 450, 500, 560, 630, 710, 800, 900, 1000, 1120, 1250 mm. ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
Application: Purification of highly polluted exhaust air with acidic or alkaline contamination. Mainly used in: Food industry. Pharma, chemical and biochemical industry. Surface treatment and solar technology. Semiconductor and clean room. Waste, sewage treatment, composting. Drying ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
Application : Purification of highly polluted exhaust air with acidic or alkaline contamination. Food industry. Pharma, chemical and biochemical industry. Surface treatment and solar technology. Waste, sewage treatment. Composting. Drying ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
Self-supporting plastic construction, welded, available in PP, PPs, PPs-el, PVC, PE, or PVDF. Impeller with 12 backward-curved blades which are mechanically welded and available in PP, PPs-el or PVDF. Each impeller is tested on an overspeed test stand above normal rate and balanced dynamically and statically in two ranges. Balancing quality < Q 6.3. Torque transmission is via a standard taper ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
Flow rate: min. 2'900 m3/h to max. 127'000 m3/h. Static pressure: min. 200 Pa to max. 1'900 Pa. Efficiency: max. 64 %. Inlet-Ø: 450, 500, 560, 630, 710, 800, 900, 1000, 1120 mm. ...
Manufactured by:Colasit AG based inSpiez, SWITZERLAND
Performance: Flow rate: min. 150 m3/h to max. 13'500 m3/h. Static pressure: min. 50 Pa to max. 3'000 Pa. Efficency: max. 75 %. Inlet / Outlet-Ø: 125, 160, 200, 250, 315, 400 ...