- Home
- Equipment
Refine by
Condor Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Condor-Werke Gebr. Frede GmbH based inEnnigerloh, GERMANY
Compact pump control for price sensitive applications with limited available space.The CPS-L pump control is designed for the automatic control ofone pump (max. 4 kW / 9A).With its compact design, but with no essential concessions in terms of functions, this pump control can be ideally used for pumping systems in the field of domestic waste and sewage water as well as rain ...
Manufactured by:General de Fundición y Accesorios S.L. based inSangonera la Seca (Murcia), SPAIN
Size in accordance with the EN-545 standard. Operating pressure: PN10, PN16 and ...
Manufactured by:Comi Condor S.P.A. based inSettimo Milanese, ITALY
The horizontal peeler centrifuge HX is made for chemical applications. The version for the chemical industry, with perforated basket or rotary siphon, is normally used on products with good filterability. The cycle (feeding, washing, centrifugation and peeling) can be run at maximum speed, obtaining a high hourly ...
Manufactured by:Adler Srl based inBarasso, ITALY
Machine to recycle film of HDPE/LDPE to transform the film from very light and voluminous recyclate into granules heavy and compact capable of being used in an ...
Manufactured by:Comi Condor S.P.A. based inSettimo Milanese, ITALY
The horizontal peeler centrifuge HX/L/S with rotating siphon is designed for production of starch (native and modified). The ability to create vacuum under the filter medium, with the siphon, allows to accelerate the filtration rate, optimizing the work cycle and the residual moisture. The centrifuge HX/L/S is designed for the automatic regeneration of the residual cake (“back ...
Manufactured by:U.Emme S.r.l based inModigliana (FC), ITALY
Side discharge Cement Mixers CONDOR SL models, designed to increase safety in the yard, since the first test has shown the unique ability to create an equable mixture even when fully loaded without unbalancing the concrete by left and right depending on the direction of the screw shaft rotation. The concrete unload takes few seconds and the bucket is fully discharged. This performance upgrade ...
Manufactured by:General de Fundición y Accesorios S.L. based inSangonera la Seca (Murcia), SPAIN
For connecting or repairing PE pipes. Range of sizes from DN20 to DN90. Made from forged brass under the UNE EN 12165 standard. Controlled in accordance with the UNE-EN 712, UNE-EN 713, UNE-EN 715 and UNE-EN 911 standards. Operating pressure up to 25 bar (PN25). Gas threaded end (BSP) complying with the ISO228/1 standard, Operating temperature: -20º C to + 100º ...
Manufactured by:Condor-Werke Gebr. Frede GmbH based inEnnigerloh, GERMANY
Float switches for emptying.On reaching the upper switching threshold the switching mechanism activates the pump. On reaching the lower switching threshold the pump is switched off.This float switch can also be used as run dry protection. ...
Manufactured by:Comi Condor S.P.A. based inSettimo Milanese, ITALY
The vertical axis bottom discharge centrifuge TM is available in the standard version with fixed frame and openable cover or in the "GMP" version, with frame and cover forming one fully openable piece, meeting the requirements of the pharmaceutical industry (inspectable process area). ...
Manufactured by:Condor-Werke Gebr. Frede GmbH based inEnnigerloh, GERMANY
Compact pump controlof the latest generation for more system transparency. The pump control is designed for the automatic control and monitoring ofone pump (max. 4 kW/9A) in the Direct start. CPS-B1 with high quality basic equipment in standard execution.This pump control can be ideally used for pumping systems in the field of domestic waste and sewage water as well as rain water. For use in ...
Manufactured by:Comi Condor S.P.A. based inSettimo Milanese, ITALY
The horizontal peeler centrifuge HX/GMP is designed for typical pharmaceutical applications. The HX/GMP centrifuge can be used for a production of intermediate and especially finished synthesis products, where it is absolutely necessary to avoid the contact between product and operator. It's also possible to have a completely sterilizable version with vaporized hydrogen peroxide (VHP system). ...
Manufactured by:Comi Condor S.P.A. based inSettimo Milanese, ITALY
The vertical axis bottom discharge centrifuge TM is available in the standard version with fixed frame and openable top ...
Manufactured by:General de Fundición y Accesorios S.L. based inSangonera la Seca (Murcia), SPAIN
CASING: AISI 304 stainless steel. JOINT: EPDM. GASKET: AISI 304 stainless steel. SCREWS: AISI 304 stainless steel + Teflon. WASHER: ...
Manufactured by:Condor-Werke Gebr. Frede GmbH based inEnnigerloh, GERMANY
High-performance pressure switch for switching motors (Compressor version), available in various versions and with optional accessories. The tried and tested MDR series represent reliability and competence. The high quality of pressure controls is continuously confirmed in extensive tests, for example lifetime and vibration ...
Manufactured by:Condor-Werke Gebr. Frede GmbH based inEnnigerloh, GERMANY
The high-performance pressure switch for the North American market- for switching motors (compressors), available in various versions and with optional accessories. The high-performance pressure switch MDR 11 has been certified acc.to UL and CSA standards.Thelateral cable entryprovides a largerconnecting ...
Manufactured by:Condor-Werke Gebr. Frede GmbH based inEnnigerloh, GERMANY
Thehigh-performance pressure switch for switching motors (compressors and pumps), available in various versions and with optional accessories. The pressure switch has been successfullytested and certified by the KEMA KEUR Test and Certification ...
Manufactured by:U.Emme S.r.l based inModigliana (FC), ITALY
The U.Emme Cement Mixers CONDOR range has been improved in the last years with high quality components making every CONDOR model an extremely performing tool for any type of building work. All CONDOR models are equipped with reliable and powerful Char-Linn EATON hydraulic motors, US brand leader in the world. The complete mouldboard and all the mixing helixes are standard built in HARDOX metal ...
Manufactured by:Comi Condor S.P.A. based inSettimo Milanese, ITALY
Pilot centrifuges are used for both research and development laboratories, and both small productions of high added value ...
Manufactured by:General de Fundición y Accesorios S.L. based inSangonera la Seca (Murcia), SPAIN
Ductile cast iron body (GGG-40) coated in epoxy according to the DIN 30677-2 standard. Short BSP thread, with no threads exposed to the medium. EPDM rubber seal, certified for drinking water. A2 stainless steel screws The holes for the screws are completely coated in epoxy to protect them from ...
Manufactured by:General de Fundición y Accesorios S.L. based inSangonera la Seca (Murcia), SPAIN
Drinking water supplies, fire fighting systems, irrigation and waste water ...
