- Home
- Equipment
Refine by
Core Environmental Equipment & Supplies
43 equipment items found
Manufactured by:En Novative Technologies - a QED company based inDexter, MICHIGAN (USA)
The En Core Sampler Extrusion Tool for use with the En Core Sampler. Used in the laboratory, along with the En Core sampler, to remove soil. When either a 5 gram or 25 gram disposable En Core Sampler arrives at the laboratory, attach it to the Extrusion Tool, engage the plunger, and push the sample into an appropriate ...
Manufactured by:Hydra-Stop based inBurr Ridge, ILLINOIS (USA)
The Hydra-Core Pipe Wall Sampling Kit allows a small core sample to be taken from the host pipe prior to completing the final valve insertion line tap. Why is this ...
Manufactured by:Geoprobe Systems -Kejr, Inc. based inSalina, KANSAS (USA)
Our MC5 Soil Sampling System is a single tube, discrete or continuous system with unmatched durability. The MC5 1.25 in. Center Rod System was designed for the absolute worst of the worst direct push probing conditions. “These are conditions that we normally do not recommend probing in,” according to Mike Carlin, Project Engineer, “so we developed the toughest soil sampling ...
Manufactured by:Geoprobe Systems -Kejr, Inc. based inSalina, KANSAS (USA)
The MC7 is a continuous soil sampler that compliments the industry standard MC5 system with very similar means of operation. The MC7 offers a larger diameter soil core (3 in. or approximately 70 mm. ) than the MC5 system. This is very advantageous when sampling in formations such as course sands or gravels that may be too large for the MC5 system. The MC7 system can be used with standard Geoprobe ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Kit Contains: 1 T-Handle. 12 En Core Samplers. 1 Demo Sampler. 1 Certificate good for $100 toward the purchase of 3 cases of En Core ...
Manufactured by:Semtech Corporation based inCamarillo, CALIFORNIA (USA)
The SX1250 is a sub-GHz RF front end device designed to work along with Semtech’s SX1302 baseband engine, to design a high-performing gateway leveraging LoRa® or LoRaWAN®. It covers any frequency band below 1GHz, making it the perfect candidate to support any license-free band used in today’s IoT use ...
Manufactured by:Semtech Corporation based inCamarillo, CALIFORNIA (USA)
The SX1303 is a new generation of LoRa® baseband processor for gateways. It is size and pin compatible with SX1302 and like SX1302, it excels in cutting down current consumption, simplifying thermal design, lowering Bill Of Materials cost, and reducing overall size of gateways. In addition to supporting all the features of SX1302, SX1303 introduces a new Fine Timestamp capability that enables ...
Manufactured by:Sensa Core Medical Instrumentation Pvt. Ltd. based inHyderabad, INDIA
Sensa Core's Hemo Spark is an in vitro diagnostic device that is used for quantitative testing of total hemoglobin in the blood. It is unique among the most portable and affordable hemoglobin meters which are user-friendly and reliable to measures hemoglobin levels in the blood. Sena Core's Hemo Spark is an instrument used to determine the hemoglobin content of the blood by reflectance photometry ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Disposable volumetric soil sampling The Sampler collects, stores and delivers soil samples, all within one easy-to-use device. The airtight sealing cap prevents the loss of volatiles as the Sampler becomes its own self-contained package. No chemicals are involved in the field. Besides its simplicity of use, the disposable En Core Sampler avoids many of the problems of current high level VOC soil ...
Manufactured by:Sensa Core Medical Instrumentation Pvt. Ltd. based inHyderabad, INDIA
Lacto Spark measures blood lactate very quickly on a very small drop of blood. This results in a virtually painless, yet fast and accurate to test lactate. Lacto Spark is a hand-held lactate analyzer that requires just 0.5 µl of capillary blood and returns results in 5 seconds. Up to 500 results can be stored on the device which might also be very much useful for performance measurement. ...
Manufactured by:Core Sensors LLC based inWhippany, NEW JERSEY (USA)
The CS14 Wet/Wet Differential Pressure Transducer is designed for various applications including filtration and tank level monitoring. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. The compact designs makes it a perfect solution for differential measurement ...
Manufactured by:En Novative Technologies - a QED company based inDexter, MICHIGAN (USA)
The Terra Core is a one time use transfer tool, designed to easily take soil samples and transfer them to the appropriate containers for in-field chemical preservation. It is a cost effective, time saving, disposable transfer tool for soil sampling as described in USEPA SW-846 Method 5035. The Terra Core Sampler delivers an approximate 5 gram or 10 gram sample. The Terra Core's rugged all-in-one ...
Manufactured by:H2 Core Systems GmbH based inHeide, GERMANY
H-Port offers an efficient way of producing, compressing and handling hydrogen for refueling vehicles and forklifts. The H-PORT solution is based on efficient AEM electrolysis system of H2 Core Systems to generate hydrogen, the well-known HULC technology from Maximator to compress the gas up to 1,000 bar, the control systems by ...
Manufactured by:En Novative Technologies - a QED company based inDexter, MICHIGAN (USA)
The En Core Sampler, a disposable volumetric sampling device, was developed to assist field personnel in taking soil samples with minimal handling and maximum ...
Manufactured by:H2 Core Systems GmbH based inHeide, GERMANY
The plug & play AEM electrolysers turn renewable electricity and water into low-cost green hydrogen. At any scale, for any ...
Manufactured by:Urban Mining Solutions GmbH based inRemscheid, GERMANY
With the well-proven CORE System ERP1, UMS offers a highly efficient combination of aggregates for the preliminary treatment of old equipment and composite scrap. The system is universally and quickly adaptable for a variety of input materials, and enables the immediate discharge of coarse iron and steel, as well as the targeted separation of recyclable fractions and ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
Reliable and adaptable REACTIVE CORE MAT gives you the versatility for underwater containment mitigation when shallows and slopes rule out the use of other sediment treatments. It goes where you need ...
Manufactured by:Core Sensors LLC based inWhippany, NEW JERSEY (USA)
The CS54 Non-Incendive Differential Pressure Transducer is a high strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges ...
Manufactured by:Core Sensors LLC based inWhippany, NEW JERSEY (USA)
The CS84 Intrinsically Safe Differential Pressure Transducer is a high strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 1 Intrinsically Safe locations. The CS84 features an all welded stainless steel construction for a minimum IP65 rating. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature ...
Manufactured by:En Novative Technologies - a QED company based inDexter, MICHIGAN (USA)
Kit Contains: 1 T-Handle, 12 En Core® Samplers, 1 Demo Sampler, 1 Certificate good for $100 toward the purchase of 3 cases of En Core® Samplers. Total Cost of Starter Kit = $187.50. A savings of ...