- Home
- Equipment
Refine by
Hydra Tech Environmental Equipment & Supplies
42 equipment items found
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S12M is designed for pumping high volumes of water at low to medium heads. This pump is great for lake draining, flood control, drydock, foundation and cofferdam de-watering. Also use as a water supply pump for mobile fire suppression ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S4SCR is ideal for pumping high viscosity liquids such as crude oils, latex, molasses and refinery wastes using a positive displacement screw. When pumping lighter materials, the impeller acts as a centrifugal type providing high volume ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S3SHR is designed to continuously rip and shear solids with a 360° shredding action. The smaller size allows for use in tight spaces. For municipal, industrial, agricultural and institutional waste applications. A guide rail assembly is available for stationary ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6150 is a High Performance Solids Handling Pump for use on jobs where higher heads or long discharge runs are encountered such as lift stations, ship offloading, mine and quarry dewatering. Heads to 310 feet, flows to 2450 ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S18M is designed for pumping high volumes of water at low to medium heads. The mixed flow impeller allows this pump to be used in a wide range of applications including lake draining, stream by-pass, flood control, drydock, foundation and cofferdam de-watering. Also used to create flooded wildlife ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
Our S3T, most popular model, is designed for jobs like construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It passes through a 12″ opening and can pump in debris laden areas. A small hole strainer is available for limiting solids to be ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S3CSL pump is designed for use in applications requiring settled solids to be put into suspension and pumped with the discharge water. Primary applications include de-silting ponds, lakes and streams. Other jobs may include filling sand bags to prevent beach erosion, tank and digester cleaning or pumping residue from rail tank cars or barges, often used for slip dredging at ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S24M is designed for pumping high volumes of water at low to medium heads. The mixed flow impeller allows this pump to be used in a wide range of applications including dam construction and Flood ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S30M is designed for pumping high volumes of water at low to medium heads. The mixed flow impeller allows this pump to be used in a wide range of applications including dam construction and Flood ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S3SCR is ideal for pumping high viscosity liquids such as crude oils, latex, molasses and refinery wastes using a positive displacement screw. When pumping lighter materials, the impeller acts as a centrifugal type providing high capacity. Typical uses include oil skimmers and cargo ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S2T-2 is a Very Portable Vortex Impeller pump. This pump can handle stringy solids and can be used for jobs such as bilge pumping, jobsite dewatering, wastewater transfer, oil skimmers, vault pumping and grit chamber ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S3TR model is designed for difficult pumping jobs where stringy solids are present. A fully recessed vortex impeller allows this pump to handle difficult solids found in sewage applications. It has the ability to pass through a 12 inch opening and continue to pump in debris laden job ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S4SHR is designed to continuously rip and shear solids with a 360° shredding action. Great for municipal , industrial, agricultural and institutional waste applications. A guide rail assembly is available for stationary ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S4VHL is designed to handle wastewater and sewage and will fit through a 20" diameter manhole . Primary uses for this pump are: Sewer by-pass into force mains and general transfer of solids laden fluids. This versatile pump is offered in aluminum or ductile iron construction. Shut off head at 200 feet. ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6SCR is ideal for pumping higher viscosity liquids such as heavy fuel oils, latex, and refinery wastes using a positive displacement screw. When pumping lighter materials the impeller acts as centrifugal type providing high capacity pumpage. Standard type pump for oil recovery ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6CSL pump is designed to use in applications requiring settled solids to be put into suspension and pumped with the discharge water. Primary applications include de-silting waterways. Other jobs may include filling sand bags to prevent beach erosion, tank and digester cleaning or pumping sediment from caissons. Durable pump for clearing cellars during drilling ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6T is our most popular 6″ Pump. It is lightweight, compact and able to pass large solids, stringy materials and slurries with entrained gases. This versatile,powerful top discharge pump is designed for sewer bypass jobs, digester cleaning, plant intake desilting and inline pumping. Shut off head to 120 ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6250 is a Solids Handling Effluent Pump for use on jobs such as waste treatment, sewer by-pass, barge transfer, municipal lift stations and tank pumping. Heads to 190 feet and flows to 5000 ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6300 is a highly efficient, high volume, solids handling pump. Typical uses for this pump would be sewer by-pass, barge transfer, municipal waste lagoon and tank pumping. Also used as a high volume feed pump for fire suppression systems. Heads to 110 feet and flows to 8500 ...
Manufactured by:Hydra-Tech Pumps based inNesquehoning, PENNSYLVANIA (USA)
The S6SHR is designed to continuously rip and shear solids with a 360° shredding action. Great for municipal , industrial, agricultural and institutional waste applications. A guide rail assembly is available for stationary ...