- Home
- Equipment
Refine by
Indag Environmental Equipment & Supplies
9 equipment items found
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG homogenizer type DLM/H is used for effective emulsifying, dispersing, shearing and mixing of fluids and solids. Applications are: for production of cosmetics oil, water and emulsifier are combined to stable emulsion. DLM/H produces mayonnaise from oil, vinegar solution and egg. Droplet sizes of smaller 1 µm are achieved by rotor tip speeds of >20 m/s and smallest clearance. Another ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG dynamic inline mixer type DLM/M is used for gentle mixing of shear sensitive products. Examples for applications are: to mix fruit concentrate into yoghurt or quark and chocolate into ice cream. A mousse au chocolat is produced by gently fold chocolate into egg white foam. Sensitive foam will not be destroyed. Other examples are to mix caustic lye into vegetable oil for neutralization or to ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG intensive inline mixer type DLM/S is used for effective mixing, emulsifying, dispersing and aerating of fluids, solids and gases. Examples of applications are: mixing of egg yolk, oil and vinegar solution to create a premixture for mayonnaise production. Another example is aeration of marshmallows. In this case egg white, a sugar syrup and air is mixed to achieve a fine-pore foam. DLM/S ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG intensive inline mixer type DLM/P is used to mix homogeneously mixer shear sensitive liquids with additives. Even if concentration of additive (i.e. 0,01%) is very small, mixing result will be absolutely homogeneous. Introduced mixing energy will not increase temperature of product more than 1°C. Especially shear sensitive products like aerated foams will not be destroyed by INDAG ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG dynamic inline mixers are used in polymerisation and extrusion/compounding applications. Requirements on mixing technology for mixing of additives or master batches into high viscous polymer (hot melt of plastic) are: pressures up to 160 bar (2500 psig), viscosities up to 10,000 Pas and temperatures of up to 330°C (626°F). Examples of products to mix: Polyethylen PE, Polyamide PA, ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG dynamic inline mixer type DLM/M is used to mix homogeneously a diversity of liquids. Even shear sensitive liquids or liquids with high solid content can be mixed. Only DLM/M rotor is equipped with mixing elements. Stator is without mixing elements. Therefore even fibrous particles will not lead to blockage of mixer. A small selection of examples for applications are: Mixing of sewage sludge ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG intensive inline mixer type DLM/S is used for effective mixing, emulsifying, dispersing and aerating of fluids, solids and gases. Shear rate of DLM/S is of medium level compared to DLM/H homogenizer. A small selection of examples for applications are: continuous production of emulsion of oil + water + emulsifier; dispersion of oil + acid; emulsion of silicon-oil + water + emulsifier; ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG homogenizer type DLM/H is used for effective mixing, emulsifying, dispersing and aerating of fluids, solids. Shear rate of DLM/H is very high. A small selection of examples for applications are: continuous production of stable emulsion of oil + water + emulsifier; dilution of Natriumlaurylethersulfat (SELS) + water. DLM/H homogenizers are used in production of colour, varnish, detergent, ...
Manufactured by:INDAG Maschinenbau GmbH based inBorsfleth, GERMANY
INDAG intensive inline mixer type DLM/P is used to homogeneously mixing shear sensitive liquids. For example aroma, color or emulsifier is mixed into fat mass or chocolate. Even if concentration of additive (i.e. 0,01%) is very small, mixing result will be absolutely homogeneous. Introduced mixing energy will not increase temperature of product more than 1°C. Especially shear sensitive ...