- Home
- Equipment
Refine by
Pompe Environmental Equipment & Supplies
49 equipment items found
Manufactured by:Pompes Japy based inFESCHES-LE-CHATEL, FRANCE
Construction materials; Suction pipe. 3 metres of discharge hose. Ø 19 mm spout. Adaptor for barrels. Specifications and advantages; Manual pump for manual AdBlue ...
Manufactured by:Pompe Rotomec Srl based inCernusco Sul Naviglio, ITALY
Ventilation systems to processes of oxygenation and homogenization treatment plants Wastewater civil, industrial and livestock. Compact and simple to install allows the use in tanks of any shape and size, to optimize the yield of the transfer of oxygen and to avoid possible sedimentation, in some cases it is advisable to also use in combination with one or more mixers ...
Manufactured by:Pompe Rotomec Srl based inCernusco Sul Naviglio, ITALY
Submersible electric pumps with vortex open impeller, pump body in cast iron, impeller in stainless steel AISI 304, motor in liquid refrigerant bath, dielectric, not pollutant; thermal protection switch incorporated for single-phase ...
Manufactured by:Pompes Japy based inFESCHES-LE-CHATEL, FRANCE
For the pumping of muddy and sandy water. Excavation drying. Designed for prolonged dry running. Temperature of the pumped liquid: 0 to 40°C. 230 V, 50 Hz single-phase motor with built-in heat protection and 10 m cable. Maximum permitted particle size: Ø 6 mm. Aluminium motor casing, stainless steel shaft, urethane turbine, waterproofing by a double mechanical seal with oil chamber. ...
Manufactured by:Pompes Japy based inFESCHES-LE-CHATEL, FRANCE
For the pumping of muddy and sandy water. Excavation drying. Designed for prolonged dry running. Temperature of the pumped liquid: 0 to 40°C. 230 V, 50 Hz single-phase motor with built-in heat protection and 10 m cable. Maximum permitted particle size: Ø 6 mm. Aluminium motor casing, stainless steel shaft, urethane turbine, waterproofing by a double mechanical seal with oil chamber. ...
Manufactured by:Pompes Japy based inFESCHES-LE-CHATEL, FRANCE
For the pumping of muddy and sandy water. Excavation drying. Designed for prolonged dry running. The PE-S pump leaves just 1 millimetre of residual water. Temperature of the pumped liquid: 0 to 40°C. 230 V, 50 Hz single-phase motor with built-in heat protection and 10 m cable. Maximum permitted particle size: Ø 6 mm. Aluminium motor casing, stainless steel shaft, urethane turbine, ...
Manufactured by:Teknofluor SRL based inMilano, ITALY
The HV Vertical Centrifugal Pump from A.G.I. is specifically engineered for optimal performance in a variety of industrial environments. Its design is focused on handling and transferring diverse liquids, particularly within the chemical and water treatment sectors. This pump is developed to meet rigorous industrial standards, equipped to function efficiently in demanding conditions. Its vertical ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
Applications; Suitable for irrigation systems, snow, reverse osmosis, high pressure lifting, water supply and fire ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
USES: Suitable for agriculture, civil, industrial and fire fighting. Particularly suitable for irrigation or ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
USES: Suitable for agriculture, civil, industrial and fire fighting. Particularly suitable for irrigation or ...
Manufactured by:Pompe Ferrari s.n.c. based inNovellara (RE), ITALY
It is suitable to pump both bovine/pig slurry and biogas (digestate treatment), and it could be installed on fixed equipment and self-propelled sprinklers, where medium/high heads are required. The pump is outfit of a oil-bath gear multiplier, with impeller shaft supported by roller-type cone-shaped bearing; electrowelded support and suction structure; spheroidal cast iron hydraulic unit. The ...
Manufactured by:Pompe Rotomec Srl based inCernusco Sul Naviglio, ITALY
Grinder pumps for installation with small diameter pipelines in order to handle pressurized sewage. The grinder device crushes the solid parts preventing ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
The hydraulic performance is guaranteed by the ISO9906-Grade 2 annex A. The published hydraulic performance does not take into consideration the leakage from the bottom valve and the axis line. The allowed amount of solids present in the pumped liquid is: 40g/mc. Maximum functioning time with closed outlet: 4 minutes. All the components touched by the liquid are available in different types of ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
The hydraulic performance is guaranteed by the ISO9906-Grade 2 annex A. The published hydraulic performance does not take into consideration the leakage from the bottom valve and the axis line. The allowed amount of solids present in the pumped liquid is: 40g/mc. Maximum functioning time with closed outlet: 4 minutes. All the components touched by the liquid are available in different types of ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
The hydraulic performance is guaranteed by the ISO9906-Grade 2 annex A. The allowed amount of solids present in the pumped liquid is 40g/mc. Maximum function time with closed outlet and liquid at 90°C is 0 minutes, with liquid at 40°C it is 5 minutes with a speed of 1500 rpm and 2 minutes with a rotation speed of 3000 rpm. All the components that are touched by liquids are available in ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
The hydraulic performance is guaranteed by the ISO9906-Grade 2 annex A. The allowed amount of solids present in the pumped liquid is 40g/mc. Maximum function time with closed outlet and liquid at 90°C is 0 minutes, with liquid at 40°C it is 5 minutes with a speed of 1500 rpm and 2 minutes with a rotation speed of 3000 rpm. All the components that are touched by liquids are available in ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
Applications; Suitable for lifting, pressurizing and distribution in civil and industrial autoclave and tanks, washing plants, irrigation systems, Draws from wells with a diameter of 104 mm min, tanks or ...
Manufactured by:Pompe Zanni Srl Unipersonale based inRubiera (RE), ITALY
Applications; Suitable for lifting, pressurizing and distribution in civil and industrial autoclave and tanks, washing plants, irrigation systems, Draws from wells with a diameter of 104 mm min, tanks or ...
Manufactured by:Pompe Rotomec Srl based inCernusco Sul Naviglio, ITALY
Submersible mixers ECOMIX series are characterized by rugged and compact construction. They install multipolar electric motors and selfcleaning propellers with 2 or 3 blades, particularly studied for lower consumption with high ...
Manufactured by:Pompes Japy based inFESCHES-LE-CHATEL, FRANCE
Technical data : Body: brass. Control valve with pressure gauge. Suction hose: length: 1.5 metres. Discharge hose: length: 1.5 metres. Power: 1.75 kW. Voltage: single-phase 230 Volts. Max. pressure: 50 bars. Specifications and advantages: Electric test ...