- Home
- Equipment
Refine by
Schmidt Environmental Equipment & Supplies
25 equipment items found
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
This miniBlaster is a pressure hold system. The blast pot retains pressure when the deadman control is released, minimizing abrasive loss with start-up and shut-down and providing faster response. Thompson Valve II ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
Normally closed, fail-safe valves and controls. High flow auto air valves standard for maximum productivity. Standard 1600 cfm moisture separator for consistent abrasive flow. Available as stationary or mounted on highway and yard trailers. Skid and Fork Pocket Skid options. Standard 150 psi ASME code pressure vessel. 12” x 16” manway. Optional bag rack with pipe stubs for abrasive ...
Manufactured by:SCHMIDT Technology GmbH based inGeorgen, GERMANY
G2 refill with stainless steel tip with TC ball, writing strokes F, M and B writing colours black, blue, red and ...
Manufactured by:SCHMIDT Technology GmbH based inGeorgen, GERMANY
From 1.6 kN to 22 kN. Throat depth from 65 mm to 200 mm. Working height from 60 mm to 600 mm. Efficient manufacturing requires appropriate means of production - not always automation. In particular, with small production runs, manual presses are often the most cost effective solutions. We are continually developing the range of manual presses so that you can achieve your production goals. The ...
Manufactured by:SCHMIDT Technology GmbH based inGeorgen, GERMANY
Cost-effective alternative in pressurised systems up to 10 bars: SS 20.261. The creation of compressed air is a cost-intensive process. It will therefore pay you to optimize the compressed-air networks. The first step is the knowledge how and where the optimization can be ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
The Schmidt M-Series blasters are our most versatile blasters available. Use these blasters with virtually any abrasive media, from sodium bicarbonate (baking soda) and other fine abrasives to steel grit. One blaster does it all! Includes regulated pressure controls and full port bypass to blast at low to high pressures, a media vibrator to help ensure smooth, even flow of abrasive and the ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
The Schmidt Offshore Abrasive Management System (OAMS) enables companies to transport abrasive to and from offshore rigs in a sealed, moisture free environment. Constructed with galvanized steel, the OAMS is a stable and secure transport system with none of the drawbacks of PVC bulk bags. The OAMS can be filled either through a 20” access port or by vacuum via the 4” vacuum fill ...
Manufactured by:Beun - De Ronde Serlabo (BRS) bvba/sprl based inBeersel, BELGIUM
Coloromat S – single beam photometer for color measurements. Absorption and transmission measurement of liquid samples at up to 7 wavelengths. The new designed Coloromat S allows easy measurement of transmission, extinction and ICUMSA liquid colour units at the recommended standard wavelength 420 ...
Manufactured by:Schmidt Haensch GmbH & Co. based inBerlin, GERMANY
The new purity analyser system of SCHMIDT + HAENSCH is a follow-up development of the previously existing Purity Analyser. It combines all advantages of the integrated new polarimeter and refractometer. The modular system of the instrument lines of SCHMIDT + HAENSCH enables you to design an automatic laboratory analyser to automatically calculate the purity in cane sugar mills or beet sugar ...
Manufactured by:Schmidt Haensch GmbH & Co. based inBerlin, GERMANY
SCHMIDT + HAENSCH has developed modular, computer aided automated laboratory systems, based on their conventional optoelectronic measuring instruments, which include not only polarimeters and refractometers but also a new sugar colorimeter and conductometric ash determination. They can also be upgraded by including pH measurement, balances, barcode scanners and all necessary instruments for ...
Manufactured by:Screening Eagle Technologies AG based inSchwerzenbach Zurich, SWITZERLAND
Concrete strength and uniformity testing using rebound hammer technology. Strength estimation made simple and at a fraction of the cost. Comprehensive mobile apps and web-based functionality enhancing productivity. Original Schmidt ...
Manufactured by:M-B Companies, Inc. based inChilton, WISCONSIN (USA)
The Street King 660 is an especially powerful and efficient truck-mounted sweeper. It boasts outstanding suction power, a large 9.2 yd³ hopper, and a high water volume for long sweeping distances and maximum efficiency. With a self-supporting frame, the mounted sweeper can be attached to any truck type, provided that its load capacity conditions continue to be satisfied for approval – ...
Manufactured by:Schmidt Haensch GmbH & Co. based inBerlin, GERMANY
The SCHMIDT + HAENSCH EDM Density Meter is designed for continuous density measurement in a broad range of application. EDM is a rugged, sealed single-piece system with the flexibility to handle nearly any customer request for such instrumentation. It gets manufactured with the worldwide known SCHMIDT + HAENSCH quality in Germany where all parts are under extreme stress tested and prepared for a ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
This popular system features the fine abrasive metering capabilities of the MV 3/ComboValve controls, VBS II™ blowdown suppression for safe and quieter blowdown and one of the lowest pressure drops in the industry for added ...
Manufactured by:BlastOne International based inMurarrie, AUSTRALIA
The Schmidt AmphiBlastTM Lite 3.5 is simple, portable and accurate. It gives the operator the option of blasting wet, dry, SoftwashTM or blowdown with repeatable and optimal flow parameters for each function. Minimal water usage (less than 1 pint / ½ liter) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
Normally closed, fail-safe valves and controls. High flow auto air valves standard for maximum productivity. Standard 1600 cfm moisture separator for consistent abrasive flow. Available as stationary or mounted on highway and yard trailers. Skid and Fork Pocket Skid options. Standard 150 psi ASME code pressure vessel. 12” x 16” manway. Optional bag rack with pipe stubs for abrasive ...
Manufactured by:SCHMIDT Technology GmbH based inGeorgen, GERMANY
From 1.6 kN to 2.5 kN. Throat depth from 65 mm to 200 mm. Working height from 60 mm to 600 mm. Do you need a long stroke and a constant force progression for assembly processes? Then, SCHMIDT Rack-and-Pinion Presses are just the right choice. ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
The ideal solution for small and delicate jobs, the mini M-Series boasts the same precise abrasive metering and blast control of its larger counterparts while weighing just 90 ...
Manufactured by:Axxiom Manufacturing, Inc. based inFresno, TEXAS (USA)
The next-generation valve in the Thompson Valve line. Shuts off abrasive flow to the nozzle and seals the tank at the same instant. Ideal for multiple outlet use. Offers significant improvements over the original Thompson Valve designed to improve performance, make servicing easier and extend service life. Faster response, finer control. More sleeve choices available to accommodate a wider range ...
Manufactured by:SCHMIDT Technology GmbH based inGeorgen, GERMANY
Flow rate volumes of gases – an important parameter in industrial processes. Measures to save energy and to assure quality in the production process are of particular importance in industrial processes. The ability to measure volumetric flow rates and volumetric flow of gases precisely has an important role to play in ...