- Home
- Equipment
Refine by
Datataker Environmental Equipment & Supplies
23 equipment items found
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT85GW GeoLogger – A versatile, powerful – yet low power & cost effective data logger. It support vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI – Applied Geomechanics Inc. DT85GW is also capable to ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT85GM GeoLogger – A versatile, powerful – yet low power & cost effective data logger. It support vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI – Applied Geomechanics Inc. DT85GM is also capable to ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
DataTaker DT82I is a low end variant of DataTaker logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display. DataTaker DT82I’s supports analog inputs, digital I/O, counters and MODBUS communication. DT82I logger is able to store up to 10 million data points (expandable) you can log as much or as little as you need. ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Versatile Measurement: Connect an array of sensors through the versatile analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels. Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned in engineering units or within ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
DataTaker DT80 is standard logger which supports analog inputs, digital I/O, counters, SDI12 and smart sensor. The extensive range of sensors selection make this variant of DataTaker a good choice for complex applications which includes a lot of sensors especially with the ability to use extension module CEM20. No need to have multiple loggers in one installation site as DT80 can read up to 300 ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Universal – compatible with majority of the commercially available sensors. Programmable – customised software deployment for changing and challenging requirements. High input Impedance – ensure accurate sensor readings. Expandable – expandable to 960 analogue inputs with expansion module. Programmable analogue output – for connection to SCADA or control application. ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
The new DT80M Universal Input Data Logger Series 4 version has increased sampling speed, measurement range and programmable analog output. The dataTaker DT80M intelligent data logger is a fully featured low-powered logging platform with an integrated cellular modem, making it perfect for remote applications. The rugged design and wide operating temperature range of the DT80M provides reliable ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
The DT85W WiFi Universal Input Data Logger allows you to connect an array of sensors through the versatile analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels. Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The new DT82E Environmental Data Logger Series 4 version has increased sampling speed, measurement range, and programmable analog output. The DT82E smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18-bit resolution, extensive ...
Manufactured by:J & S Instruments, Inc. based inSpringfield, OHIO (USA)
View the data in real time or slore up to 5 million data points. Data storage and retrieval can be achieved via USB memory stick. FTP. cell phone, Modbus for SCADA. Ethernet or Web. The web server allows browser access to data and files. FTP provides data to your office over the internet or mobile phone network, without the need for polling or specific host ...
Manufactured by:J & S Instruments, Inc. based inSpringfield, OHIO (USA)
The dataTaker DT80 is a smart data logger that provides an extensive array of features that allow it to be used across a wide variety of applications. The DT80 is a robust, stand alone, low power data logger featuring USB memory stick support. 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT80's Dual Channel concept allows up to 10 isolated or 15 ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The DT90N is a compact, all-in-one data logging system with an integrated modem, specifically designed for remote applications. The rugged design and wide operating temperature range provide reliable operation in virtually any environment. These are low-power and cost-effective data loggers with a dedicated mounting handle for a simple and quick installation ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Increasing the channel capacity of the DataTaker DT80 range is made very easy by adding DataTaker Channel Expansion Modules (CEM20). Each CEM20 connects 20 universal data logging channels to the DataTaker data logger. DataTaker enclosures give you the flexibility to install your DataTaker system in a harsh or otherwise unsuitable environment by providing protection against external conditions ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
DataTaker enclosures give you the flexibility to install your DataTaker system in a harsh or otherwise unsuitable environment by providing protection against external conditions such as water, dust, and accidental damage. These enclosures are suitable for all DataTaker systems and can be used for, industrial, weather proof or portable ...
Manufactured by:J & S Instruments, Inc. based inSpringfield, OHIO (USA)
The dataTaker DT25 Series Remote Telemetry Logger monitors counter, analog and digital inputs for alarm conditions, and transmits alarm states to various destinations including a central host computer, alphanumeric pager service, or to mobile telephones. Analog input data is scaled to engineering units. Counter inputs, run progressive demand prediction analysis, calculate progressive minimum, ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
DataTaker DT82E is a low end variant of DataTaker logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display. The dataTaker DT82E’s supports analog inputs, digital I/O, counters and SDI12. With the standard unit able to store up to 10 million data points (expandable) you can log as much or as little as you need. Communications ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Connect an array of sensors through the versatile analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels. Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned in engineering units or within statistical reporting. ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT80GW GeoLogger – A versatile, powerful - yet low power & cost effective data logger. It support vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI - Applied Geomechanics Inc. DT80GW is also capable to test sensor ...
Manufactured by:dataTaker - a brand by Thermo Fisher Scientific Australia Pty Ltd. based inScoresby, AUSTRALIA
DataTaker DT85G is a high end loggers which supports vibrating wire and other Geotechnical sensors. This logger is capable to read up to 960 Vibrating Wire sensors (when using 16x CEM20) and offers the same support on analog and digital channels. DT85G provides a low cost option for connecting massive number of sensors since each channel is capable to read Vibrating Wire. With the same support on ...
Manufactured by:J & S Instruments, Inc. based inSpringfield, OHIO (USA)
The dataTaker DT81 is the answer to the end user or OEM requiring fewer channels whilst demanding the powerful features and flexibility of the DT80. With support for SDI-12 sensor network, Modbus for any SCADA systems and Web enabled features, the DT81 is ready to be rolled out into tomorrow's environmental or industrial monitoring projects. The DT81 is a robust, stand alone, low power and ...