- Home
- Equipment
Refine by
Dyna Environmental Equipment & Supplies
34 equipment items found
Manufactured by:Dynex Extrusions Ltd based inAvondale, NEW ZEALAND
Universal back flashings. Available in 50x50mm, 75x75mm and 100x100mm ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
We prioritize sourcing high-quality o-rings designed to meet the rigorous demands of various applications. Our commitment to precision and customer satisfaction drives us to work with trusted suppliers to secure o-rings that offer superior sealing capabilities, ensuring your systems operate efficiently and reliably. We offer a vast selection of o-rings, and our experts are dedicated to helping ...
Manufactured by:Dynae based inVillefontaine, FRANCE
Infrared thermography of electrical cabinets is now generalised on production sites as well as in the tertiary sector. Indeed, insurance companies encourage periodic inspections well defined in the D19 repository, in order to prevent the risks of fire and therefore reduce premiums. In order to carry out the measurements, it is necessary for the electricity consumption to be sufficient in order to ...
Manufactured by:Dynae based inVillefontaine, FRANCE
Industrial accelerometers are designed to be fixed permanently to the measuring point, either to make it possible to carry out measurements in a place which is difficult or dangerous to gain access to, or to be connected to a continuous monitoring ...
Manufactured by:Dynae based inVillefontaine, FRANCE
Laboratory quality accelerometers are used for one-off measurement in the field. The qualities sought after, in addition to metrological accuracy, are the small size to be able to be positioned on bearings where there is little space, electrical insulation to avoid any interference via ground looping and the ...
by:DYNA Instruments GmbH (MÜTEC Instruments) based inHamburg, GERMANY
The DYNAmas flowmeter is used for continuous flow measurement of all kinds of bulk materials by applying the capacitive measuring principle. Accurate online flow measurement in free fall, as well as for pneumatic transport systems. Product concentration and transport speed are simultaneous and independently measured, and then used to calculate the mass flow rate. Thus, the measuring system is ...
Manufactured by:Dynae based inVillefontaine, FRANCE
In addition to inspecting electrical equipment, infrared thermography is used for carrying out a diagnosis on refractories, heating networks or ...
by:DYNA Instruments GmbH (MÜTEC Instruments) based inHamburg, GERMANY
The DYNAguard GM is an advanced broken bag detector and filter monitor, designed for detecting filter malfunctions such as broken bags or installation errors. Operating on a modified triboelectric principle, it detects particles interacting with its sensing rod, focusing solely on moving particles and ignoring static deposits. This ensures accurate detection and monitoring. The DYNAguard GM is ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic or gaseous systems, use perforated (pin-pricked) ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
The Twin Line Thermoplastic Hydraulic Hose, designated as SAE 100R8 - 811T (Black) Twin Line, is engineered for medium pressure hydraulic and pneumatic systems, meeting or surpassing SAE 100R8 standards. Ideal for pneumatic or gaseous applications, perforated (pin-pricked) hose variants are recommended. Its construction features an oil-resistant synthetic polyester inner core, reinforced with ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
The Non-Conductive Twin Line Thermoplastic Hydraulic Hose, SAE 100R7 - 7110T (Orange), is designed for medium pressure hydraulic and pneumatic systems, meeting or exceeding SAE 100R7 requirements. It features an oil-resistant synthetic polyester inner core and is reinforced with braided high tensile synthetic fiber for durability. The hose is covered with orange non-conductive, high ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
Recommended For: Medium pressure hydraulic systems. Twin-line consists of a 1 inch SAE 100R7 hose fused with a 3/4 inch SAE 100R8 hose. Inner Core: Oil resistant synthetic polyester tubes. Reinforcement: Each hose has two braids of high tensile synthetic fiber. Cover: Bonded orange non-conductive high abrasion resistant polyurethane mold and fungus resistant polyether-urethane, featuring an ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
The SAE 100R8 - 8110 Non-Conductive Thermoplastic Hydraulic Hose is engineered for hydraulic and pneumatic systems that require increased pressure ratings from 100R8 standards. Its oil-resistant thermoplastic elastomer inner core is reinforced with braided high tensile aramid fiber, providing strength and flexibility. The non-conductive, high abrasion-resistant polyurethane cover ensures ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. Inner Core: Oil resistant synthetic polyester tube. Reinforcement: Braided high tensile aramid fiber. Cover: Orange high abrasion resistant polyurethane. Temperature Range: -40 degrees F. to +212 degrees F. (-40 degrees C. to +100 degrees ...
by:DYNA Instruments GmbH (MÜTEC Instruments) based inHamburg, GERMANY
The DYNAguard L is a sophisticated microwave barrier measurement system consisting of a transmitter and receiver unit designed specifically for the level monitoring and detection of bulk materials. This system operates by emitting microwaves from the transmitter, which are then received and evaluated by the receiver unit. As bulk material accumulates between the transmitter and receiver, it ...
Manufactured by:Dyna-Vac Equipment Inc. based inStittville, NEW YORK (USA)
We manufacture truck to your specifications: Debris Bodies up to 4000 Gallons. Steel and Aluminum Construction. Rotary Vane or PD Pump System. Dump tanks and Full Opening Doors. Mechanical or Hydraulic Drive Systems. Custom Painting Options. ...
Manufactured by:Dyna Flex Inc. based inPainesville, OHIO (USA)
We take pride in our expertise in sourcing high-quality hose fittings tailored to meet the diverse needs of various industries. Our reputation for excellence is built on a rigorous approach to sourcing and quality assurance, collaborating with leading OEMs and industry experts to secure fittings made from advanced materials. Whether you need fittings for hydraulic, pneumatic, or industrial ...
Manufactured by:Dynae based inVillefontaine, FRANCE
Multi-technical monitoring makes it possible to optimise the conditional maintenance policy by grouping together the use of complementary techniques: vibration analysis, electrical analysis, infrared thermography, lube ...
Manufactured by:Dyna-Pro Environmental based inWinnipeg, MANITOBA (CANADA)
Easy to operate pump for water jugs. The perfect alternative for dispensing water from heavy bottles without lifting or tilting. Get great tasting water with 1-2 light presses of a button. Fits most standard 11.3 L and 18.9 L ...
Manufactured by:Dynae based inVillefontaine, FRANCE
The purpose of the dynamic structure analysis is to know its vibratory behaviour in response to dynamic excitation forces.This makes it possible to avoid or correct a resonance problem, to size a shaft line, a machine chassis or a mechanical part or for example to anticipate and correct the vibrations of piping in the ...