- Home
- Equipment
Refine by
Gpe Environmental Equipment & Supplies
31 equipment items found
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Non-Contact Strip Width Measurement, Available with Fixed or Moveable Sensor Carriage, High Accuracy 0.4mm (0.016"), Compact Design for Easy Installation, No Moving Parts, Variable Width 32 to 86 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 21512 Pneumatic Sensor is a fixed gap nozzle, designed primarily for use with non-polarizing films such as polyethylene. This sensor detects the edge position pneumatically and transmits this information to a pneumatic-hydraulic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 31530 Line Guide Sensor is designed primarily for photoelectrically sensing the lateral position of a line or abrupt color contrast on web material of an opaque or transparent quality. This information is transmitted electrically to a hydraulic controller for final control action. The Model 31530 is used exclusively with the Dynaguide* Hydraulic Controller and requires a separate ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 31560 Edge Guide Sensor is designed primarily for use on pin and clip tenter frames. The sensor detects the edge of the material and transmits an electrical signal to the Dynaguide* Electrohydraulic Controller. The hydraulic controller in turn actuates the hydraulic cylinder positioning the tenter ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 31611 Capacitance Sensor is designed for intermediate center guide applications where large width variations are encountered and accuracy requirements are not critical. This unique sensor will operate in clouded, dirty and high temperature environments, where photoelectric sensors normally cannot be used. It requires little or no maintenance. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 33130D Webguide Controller eliminates the need for a separate electronic controller for various guiding ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 31570 Dynaguide Centerguide Sensor includes two 6-inch Photojet centerguide sensors. These sensing heads consist of a light source and photo-conductive cells. The light source is a 6-watt tubular fluorescent lamp that operates on 115 volts AC, 50/60 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 13120 Hydraulic Controller (servo valve) is specifically designed for any control system applications that require high performance hydraulic control or continuous servo valve actuation. The Dynaguide* Hydraulic Controller accepts electrical or pneumatic signal inputs from primary sensors. This signal is converted into a powerful hydraulic signal, through the use of an integrally ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Model 14140 Crank Type Cylinders accept hydraulic oil to produce a rotary motion (90 degrees maximum). The models consist of a linear motion cylinder and a linkage which connects to a rotary ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 31490 Rotary Position Transmitter is a potentiometer type transmitter which transmits field information to a remote point. The Model 31490 Rotary Position Transmitter is used principally as a feedback for valve actuators. The 31490 accepts a shaft position and produces a 4-20mA electrical output signal over a 2 wire system. The signal from shaft rotation is produced by a potentiometer. ...
Manufactured by:Golden Promise Equipment Inc. (GPE) based inNew York, NEW YORK (USA)
GPE F4001-Smart Vortex Flowmeter (also called a Vortex Shedding Flowmeter) is a versatile instrument that calculates the mass flow, volumetric flow rate, temperature, and pressure and density of any liquid, gas, or steam through a pipeline. Wide spread application is found in several industries including Petrochemical, Chemical, Pharmaceutical, Food and Beverage, Water, and Wastewater Treatment ...
Manufactured by:Golden Promise Equipment Inc. (GPE) based inNew York, NEW YORK (USA)
Multisonic F3001 ultrasonic ?owmeter measures the ?ow velocity of the gas via the transit times of ultrasonic pulses and calculates the ?ow rate at measurement conditions therefrom. Here use is made of the fact that ultrasonic pulses move faster in the direction of ?ow than in the opposite ...
Manufactured by:Golden Promise Equipment Inc. (GPE) based inNew York, NEW YORK (USA)
F2001-Bi-Rotor Positive Displacement flowmeter features two precisely machined rotating members known as helical rotors which rotate and mesh within the meter's interior housing in order to form a measuring chamber of known volume which may be used to accurately determine volumetric flow rate as a funtion of the rotors' velocity. The helical rotors' motion is transmitted to the display via a ...
Manufactured by:Golden Promise Equipment Inc. (GPE) based inNew York, NEW YORK (USA)
GP1001-D Series differential pressure transmitter designed for industrial pressure measurement applications. It uses the world’s advance silicon pressure sensor technology and state of the airt encapsulation technology . it features self-diagnostic, field parameter adjustment, auto-zero and all industrial standard . It is composed of pressure transmitter and the welding installation level ...
Manufactured by:Golden Promise Equipment Inc. (GPE) based inNew York, NEW YORK (USA)
The YQSJL-YN Advanced Flow Metering System is a simple yet innovative process technology that measures multiphase flow rates with superior accuracy at a very low pressure drop throughout the system. The main principle of the technology is to effectively separate the free gas from the liquid phase and to measure 3 phases independently. With the low pressure drop separation, the measurement ...
Manufactured by:Golden Promise Equipment Inc. (GPE) based inNew York, NEW YORK (USA)
GP1001- M series Multvariable transmitter designed for simltaneous measurement of multiple independent process variables and provides dynamic calculation of fully compensated mass flow rate for steam and liquids respectively and standard volume flow for gases. The process pressure is transmitted to the mono-silicon pressure sensor through the isolation diaphragm and the filling liquid. When ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 31520 Edge Guide Sensor is designed primarily for photoelectrically sensing the lateral edge position of materials in motion, in particular web material of an opaque quality. This information is transmitted electrically to a electro-hydraulic controller for final control action. Model 31520 is used exclusively with the Dynaguide* controller and requires a separate transistorized ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 21550 DYNAGUIDE Sensor detects edge position pneumatically and transmits this information to a DYNAGUIDE pneumatic-hydraulic controller which uses this information to determine the rate of correction required to maintain the edge at the desired reference position. Recovery pressure is proportional to the material ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
GPE provides a variety of sensor heads for the Series 2100 Measurement System. The easy-to-install sensor heads continuously monitor the level and automatically communicate to the GPE electrohydraulic control system, which modulates a tundish slide gate or stopper rod to maintain a desired ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Sensing Molten Metal Level with the Digital EC 2100 ensures stable, extremely accurate mold level with its differential voltage feedback operation. This patented operation enables the amplifier to more quickly transmit information, providing the actuator with valuable additional time to respond to changing levels. Simplify the transition from analog to digital. Upgrade your GPE 600/700 MA series ...