- Home
- Equipment
Show results for
Refine by
Idemag Environmental Equipment & Supplies
27 equipment items found
Showcase
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
This equipment is designed to separate non-ferrous metals (aluminum, brass, copper) from the rest of the bulk stream. Taking into account that this type of metal does not interact with magnets, this separation is obtained creating a repulsive effect by rotating powerful neodymium magnets at high ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic “overband” separators are placed suspended on the conveyor belt that carries the bulk stream to be filtered. The overband is suitable for the extraction of all kinds of ferrous materials in various industries (recycling, mining, cement, chemicals, plastics, aggregates, ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic filter for wet products is especially indicated in the mining industry. The primary material reaches the magnetic separator in the form of sludge contaminated with iron particles. In a first step, the sludge is diluted with water and the product is subsequently processed using high induction magnets. The final drain results in a clean dissolution of ferrous contaminants and a mixture ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The drive will be appropriate to the weight of the unit and can be optionally equipped with a frequency inverter. Replacing the geared motor is quick and easy, we always use leading brands that adapt to market standards. The magnets are placed in an internal circuit, around a ferrous support, protected by an external stainless steel ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Ferrite magnets, also called ceramic, are made through a sintering process. They are composed of a mixture based on iron oxide plus strontium or barium and a ceramic binder, crushed and pressed, with a very fine granulometry. If during the pressing process, the particles are oriented by applying a magnetic field, the end result is an anisotropic magnet. If this process is not done, the end result ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic plate consists of a series of ferrite or neodymium magnets coated in stainless steel. This unit is placed suspended on the conveyor belt that carries the material to be treated. It is the most simple and economical solution for the separation of ferrous elements. Its use is recommended for installations with ferrous contamination and where the unit can be placed in accessible ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Magnetic cone filters are used to remove iron contamination (nuts, screws, staples, and iron parts in general) that travel with the raw material transported through the pipes, especially raw material in powder or granules such as grains. , flour, sugar, etc… The installation of these magnetic separators is very quick and simple, since they are inserted between the pipes through which the ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Sintered neodymium-iron-boron magnets (Nd-Fe-B) are magnets of the rare earth family, they are the most powerful available on the market, with a maximum energy product that varies from 26 MGOe to 52 MGOe. They are the third generation of permanent magnets developed in the 1980s. They have high remanence and coercivity values. They are offered in a wide range of qualities, sizes and shapes. For ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
These devices are used to separate metal sheets from each other and thus facilitate their handling. Its design is calculated based on the size and thickness of the plates to be separated. They are generally built on the basis of neodymium ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Magnetic system designed for handling containers with metal lids. Our engineering department carries out an individualized study of each case, in order to optimize processes with minimum weight and maximum efficiency. The magnetic force supplied is calculated based on the type of container, full, empty, can, glass container with metal cap, ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic drum is usually mounted inside a closed casing, for the separation of products with small size to avoid any material leakage. The product circulates inside the casing through an adjustable feed flap, whereby the material flow falls directly into the range of influence of the magnetic ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Alnico magnets are made from Aluminum, Nickel, Cobalt, Copper, Iron and other components in smaller quantities. They are the only permanent magnets made using a casting process. The hot mixture is poured into the mold and after it has cooled, it is unmolded and polished. During the cooling process, the pieces are subjected to a magnetic field that orients the particles. The end result is an ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
They are produced in a wide range of formats, both in diameters and lengths. We fully adapt its design to the characteristics of the existing installation or to the requirements of any new project. The drive will be adapted to the weight of the unit and can be optionally equipped with a frequency converter. The replacement of the gear-motor is quick and easy. We always use the best brands ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The high intensity magnetic separator is designed for the treatment of particles with low ferric content. It has a high-induction magnetic circuit that, combined with a fine-profile antistatic conveyor belt and a homogeneous product feed, enables the separation of particles that are especially difficult to treat with other types of magnetic ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Magnetic bars are used for the separation of ferrous particles mixed with all kinds of materials, dry or liquid. They are composed of a magnetic circuit with powerful magnets, coated in stainless steel (304/316). ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic broom is used to remove metallic elements on large surfaces. It can be mounted in many configurations, to be attached to mobile machinery or to be moved manually. Its versatility and ease of cleaning makes it a perfect solution for this type of cleaning. In each case we study the needs of the client to design the ideal ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
These magnetic systems are a simple and robust fixing method for vibrating tables in the production of precast concrete. Its magnetic circuit is built with powerful neodymium magnets, which offer a magnificent holding capacity with a minimum weight of the set for easy handling. The magnets are mounted in a protective case with an on/off button, for quick and safe ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The metal detector is an electronic device designed specifically for locating metal contaminants mixed with other products. Its function is to protect any industrial equipment (crushers, shredders, mills, laminators, etc…) that can be damaged by a metallic element. ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
Magnetic grids are designed using different magnetic bars configurations. The magnets are placed in round or rectangular pipes, preventing the passage of ferrous contamination. Especially suitable in production lines of grain o powder ...
Premium
Manufactured by:Idemag SL based inCastellbisbal, SPAIN
The magnetic filters for granulates are another practical application of magnetic grids. They are designed for full adaptability to plant installations. Available under various configurations, they are very robust and easy to maintain equipment. Specially indicated for all types of granulated products in dry state, cold or hot. Our quality department accurately inspects the water tightness of all ...