- Home
- Equipment
Refine by
Ist Environmental Equipment & Supplies
103 equipment items found
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Thin-film platinum, ESD-optimized, 100 Ohm RTD component, -200 °C to +500 °C. Temperature sensor Pt100 with ESD optimized resistor design. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Optimal for oil measurement applications, -40 °C to 190 °C, 10.8 x 3.81 mm,10 mm wires. Capacitive humidity sensor MK33 with wires Very good for high-end measuring applications and extreme environments, therefore optimal for oil measurement applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Commodity conductivity sensor with four-electrode measurement. Measuring range from 1000 μS/cm to 100.000 mS/cm (typical cell constant of 0.66 cm-1). For various conductivity measurement applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Flow Evaluation Board FS/OOL + OOL liquid sensor. Evaluation electronics for anemometric (termal) flow sensors. Analog CTA circuit with voltage output, non-linear signal relative to power (w/o temp. compensation), shipped with OOL liquid mass flow sensor (4 mm o.D.). Variable sensitivity settings. Test OOL sensors in your application! ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Thermal mass flow module with linearized digital / analog output. Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers; Practical Evaluation Kit with fluidic block adapter for direct tube atachment, M5-4 connectors for 4mm tubing included (exchangable) ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 200 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +200 °C. The sensors are offered in various standard lengths with Cu/Ag- single or stranded wire with PTFE -insulation. The directly welded wires offer an outstanding robustness and are optimal for connector ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Driver circuit board for a quick evalution of HISbasic series IR emitters. The Driver Circuit Board supports a quick evaluation of our IR emitters. Only a supply voltage and a pulse signal have to be applied to the 3-pin Molex PicoBlade 1.25 mm connector. For more information about its function, see our technical note. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Optimal for applications with a conductivity measuring range from 100 μS/cm to 200 mS/cm (typical cell constant of 0.68 cm -1) with integrated Pt1000 temperature sensor. Conductivity sensors for water quality and waste water treatment applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Humidity evaluation kit with user interface for Windows. Test board for humidity modules HYT271, HYT221 HYT939 and HYT.R411. Evaluation board compatible with all of iST's standard humidity modules: HYT 271, 221, 939 and R411. Allows to parallel evaluation of up to 4 humidity modules. Directly executable, intuitive user interface on a USB dongle. Measure or set up logging on the fly to check ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
OOL mass flow meter for flow monitoring and leakage detection of various liquids. Accurate, robust and ready-to-use: The compact and corrosion-resistant module is suitable for flow monitoring and leakage detection. An adjustable heating setting (per I2C command) allows to achieve leackage level (ml/h) flow detection with various liquids incl. lubrication and cooling liquids, gear and hydraulic ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Hermetic gas filter cell with soldered CaF2 windows. Hermetic gas filter cells are gas-filled cylinders and are used to block out specific frequency bands of interfering gases in optical gas analysis. Additionally, the cells can be filled with reference gases of certain gas concentrations to be used for calibration of gas analysis systems. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Pt100 class F0.3 up to 600 °C with optimized ESD design. Thin-film platinum, ESD-optimized, 100 Ohm RTD component, -200 °C to +600 °C. Temperature sensor Pt100 with ESD optimized resistor design ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Heatable Humidity Sensor with integrated Pt 100 heating element, -50+C to +150°C, 5.0 x 3.8 x 0.8mm. Capacitive Humidity Sensor P14 2FW Thermo with integrated Pt-heater element and Au-coated Ni flat wires ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 600 °C Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C. The 600 °C Series is a standard solution for various temperature applications. The RTD temperature sensor is suitable for welding, crimping and ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Gas flow sensor with flow range from 0 to 100 m/s and temperature range from -20 °C to +400 °C. For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
The IST AG 400 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +400 °C. The sensors are vibration and temperature shock resistant and offer excellent ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Analog Temperature Sensor Tsic -50°C to 150°C. The TSic 306/303/301 Series of temperature sensor ICs is specifically designed as a low-power solution for temperature measurement in building automation, industrial and mobile applications. ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Testing and evaluation board for HYT humidity modules. Evaluation board compatible with all RH/T modules of the HYT product family, digital (I²C) and analog voltage outputs for relative humidity and temperature, HYT specific connectors or extention cable port ...