- Home
- Equipment
Refine by
Pagani Environmental Equipment & Supplies
22 equipment items found
Manufactured by:Battioni Pagani Pompe S.p.A. based inRAMOSCELLO di SORBOLO Parma, ITALY
WORKING CONDITIONS: PRESSURE = 6 bar (90 psi), TEMPERATURE = -15°C / + 80°C, HIGH RESISTANCE SPHEROIDAL CAST-IRON, SUPPLIED WITH 2 O-RINGS FOR COUPLING, SEALING SECURED BY 3 O-RINGS, EASY GREASING, ROTATION OF ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
10 kg drop hammer. Free fall heigt 500 mm. Special steel rods Ø 22 mm; L 1000 mm. Cone tip Ø 35.6 mm; B 90°; A 10 ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Static and/or dynamic penetrometric tests in a single device. The TG63-100 penetrometer can be configured on request to perform continuous dynamic penetrometric tests, static penetrometric tests (CPT), or both. As regards the dynamic tests, depending on the most commonly tested soil types, the penetrometer can be equipped with different hammer systems (DPSH super heavy, DPH heavy, or DPM medium). ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
An indestructible machine for your static and dynamic penetrometric tests. Anchoring system automatic and telescopic: The automatic and telescopic anchoring system installed on the mast - necessary to obtain sufficient reaction during static tests - allows the operator to fix the machine in a few intuitive and simple steps, also reducing insertion stress on the ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
This test enables the direct measurement of the undrained shear resistance of saturated cohesive soils. It can be carried out either in the field, on the wall or at the bottom of an excavation, or even in a laboratory on a confined specimen. The test consists of forcing into the soil a vane equipped with four orthogonal blades and then rotating until the soil failure. Maximum torque value must be ...
Manufactured by:Battioni Pagani Pompe S.p.A. based inRAMOSCELLO di SORBOLO Parma, ITALY
The BALLAST pump represents a technology breakthrough resulted from a major joint effort in product development and innovative design processes. The BALLAST features the Crash Protection System: a sliding flanges protection mechanism that prevents the housing or rotor to break of in case of vanes crash. The pump is easily repairable inexpensively in field. The BALLAST II pump is equipped with the ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
To satisfy the growing demand for a strong and easyto- use SCPTu system, Pagani Geotechnical Equipment designed a new touchscreen SCPTu acquisition unit that can be used outdoor with any weather ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
The Rotary System inserted on the sounding rod permits rotary drilling with screw and allows indisturbed sampling by means of a standard sampling unit. Therefore, continuos helical auger permit utilization of such device as Screw-Plate, and other special equipment for In Situ ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
The CPT test (mechanical type) is essentially the extent of resistance to opening up a bit of size and mechanical characteristics standardized, stuck in a land-speed constant (2 cm / sec). In Cone Penetration Testing, with the Begemann Mechanical Cone, the Qc (tip resistance) and RL (side friction) values are measured with a load cell and displayed on a readout electronic ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Pagani Geotechnical Equipment Penetrometers allows the dynamic driving of cones and rods according to the International Standard Procedures. ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
The Pagani DS-44 is a thick-walled sampler with a piston and it is driven into the ground by hammering. The piston allows to take samples at the depth required. The impact-hammer-driving system minimizes adverse effects such as heating effect, which occurs in sampling with rotation drive ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
CPT: Maximum working pressure [bar] 220. Pushing force [kN] 200. Pulling force [kN] 250. Downward unloaded rate [cm/sec] 0 ÷ 16. Upward unloaded rate [cm/sec] 0 ÷ 11. Stroke [mm] ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Dynamic penetrometric tests in a portable device. The DPM30 penetrometer allows exclusively continuous dynamic penetrometric tests to be performed. For the dynamic tests, the penetrometer is equipped with a 30 kg (66 pound) hammer with a 200 mm (7.87 inch) stroke, operated by a hydraulic motor. It is driven by a motor-pump unit, where the motor can be either electric (220v or 110v) or a petrol ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
4×4 penetrometer for maximum versatility in dynamic testing. The Pagani TG30-20 penetrometer is the response to the ever-increasing demand for manoeuvrable and versatile machines which are easy to use. The TG30-20 sets itself apart with the high proportion of energy transmitted to the rods by the hammer. It guarantees perfect verticality when driving in the rods. It makes removal of the ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Static and/or dynamic penetrometric tests in a single device. The TG 63-150 penetrometer can be configured on request to perform static penetrometric tests (CPT), or both static (CPT) and continuous dynamic (DP) penetrometric tests. As regards the dynamic tests, depending on the most commonly tested soil types, the penetrometer can be equipped with different hammer systems (DPSH super heavy, DPH ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Our Penetrometers are equipped with an automatic self-anchoring system that solves the problems often limit the diffusion of Static Penetrometer techniques, considered as one of the most valid In Situ Testings for a correct identification of Soil Mechanics ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Static and dynamic penetrometric tests in a single compact and easily transported machine. Anchoring system: The semi-automatic anchoring system installed on the mast - necessary to obtain the required reaction during static tests - allows the operator to fix the machine in a few, intuitive and simple steps. It also reduces the insertion stress on the ...
Manufactured by:Pagani Geotechnical Equipment s.r.l. based inCalendasco, ITALY
Static and dynamic penetrometric tests in a single compact and easily transported machine. Anchoring system: The semi-automatic anchoring system installed on the mast - necessary to obtain the required reaction during static tests - allows the operator to fix the machine in a few, intuitive and simple steps. It also reduces the insertion stress on the ...
Manufactured by:Battioni Pagani Pompe S.p.A. based inRAMOSCELLO di SORBOLO Parma, ITALY
The reliability and strength of the MEC is the result of continuous design and manufacturing improvements accomplished during 40 years of deployments. It’s simple and practical design made the MEC pumps the product of reference for agricultural and municipalities septic ...
Manufactured by:Battioni Pagani Pompe S.p.A. based inRAMOSCELLO di SORBOLO Parma, ITALY
Designed in cooperation with SPRInT, the Team of Engineering and Research of the Department of Industrial Engineering at the University of Parma, the MEC II pump represents a technology breakthrough resulted from a major joint effort in product development and innovative design processes. The MEC II features the Crash Protection System: a sliding flanges protection mechanism that prevents the ...