- Home
- Equipment
Refine by
Paul N Gardner Environmental Equipment & Supplies
8 equipment items found
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
Model D10 is offered by Gardco as an improvement over existing washability machines. It is a single cycle rate (cyc/min) machine with all of the other advantages listed (see Characteristics Common To All Models) for the entire Gardco line of Linear Motion Test Equipment. Model D16 is basically the same as Model D10 except it provides a six inch longer stroke length and accommodates a longer test ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
Grind Gages - The Grind Gages also called Hegman gages. Many types of solid materials must be ground or milled into finer particles for dispersion in appropriate liquid vehicles. The physical properties of the resulting dispersions, often called "grinds", depend not only on the actual size of the individual particles, but also on the degree to which they are ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
Mixing in a Closed Drum Means Less Hazards Using a Morse Drum Rotator eliminates spills, splashing of dangerous contents on workers, and risk of contamination. Now you can get the benefits of mixing inside closed shipping drums and have the machine do the work of loading and unloading itself! Morse 310 Series models accept the drum upright at floor level. The user controls hydraulic tilting ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
The Drying Time recorder consists of a stepper motor mounted on a rubber tipped tripod. The arm and ball assembly has a counter-poised vertical stylus consisting of a Teflon 3/8 in. (10 mm) ball stylus and a counter weight to adjust to zero. The Teflon stylus typically under a 12g load (weight supplied) is moved in a 360 degree arc at a pre-selected fixed ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
Weight per Gallon Cups are used to quickly and accurately determine the weight per gallon, and also the specific gravity of paints, lacquer, pastes, semi-pastes, and other liquid or semi-liquid materials. Until the middle of 1989, GARDCO weight per gallon cups were fabricated using Series 300 Stainless Steel for the sidewall and the easier machined but less corrosion resistant Series 400 ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
The Tinker & Rasor Model M/1 Detector is known worldwide as the best choice for the inspection of thin film coatings (0-20 mils). This detector is non-destructive and the applied voltage to the coating never exceeds 67-1/2 volts at any ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
Four measurements in one instrument: Film thickness Fe/NFe, Dew Point, Air Temperature, Relative ...
Manufactured by:Paul N. Gardner Company (GARDCO) based inPompano Beach, FLORIDA (USA)
The P-A-T Paint Adhesion Test Kit produced by Gardco contains all of the tools and materials needed, except for the multi-tooth cutter blade, for conducting adhesion tests on paints applied to a flat, uniform surface in accordance with ASTM Test Method D3359, method B and DIN Standard No. 53151. The multi-tooth cutter blade is furnished separately to permit choice among the various available ...