- Home
- Equipment
Refine by
Presens Environmental Equipment & Supplies
19 equipment items found
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Sensor spots (SP) are the most versatile version of non-invasive optical oxygen sensors. They are attached to the inner surface of any transparent ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Implantable probes are the miniaturized fiber optic oxygen sensors designed for various customized applications. The tiny probe has a tip size of < 50 µm (TS) to 140 µm (TF) while the outer diameter ranges from 140 µm to 900 µm. The microsensor tip is not mounted in any additional housing. The bare glass fiber tip can be mounted to your own housings, steel tubes and ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The SFR Shake Flask Reader monitors pH, oxygen and OUR in up to 9 Erlenmeyer flasks, cultivation tubes, or T-flasks simultaneously. It fits in nearly all standard shakers. Measurement data is transferred wirelessly via Bluetooth to your PC / notebook. The corresponding ready-to-use vessels contain pre-calibrated sensor spots. The system monitors non-invasively through the transparent bottom of ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The pH-1 mini is a precise fiber optic pH meter. It is used with pH sensors based on a 2 mm optical fiber. A PC is connected to run the easy-to-use software and control measurements. pH-1 mini is equipped with an analogue out and a trigger input. pH sensors type HP5 & HP8 are compatible with the pH-1 mini and are optimized for physiological ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The CO2 dipping probe is a chemical optical sensor based on 2 mm polymer optical fiber (POF). The sensor membrane is fixed at the tubing end of the optical fiber connected to the transmitter. It is the solution for invasive measurements and ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The non-invasive optical oxygen sensors measure the partial pressure of both dissolved and gaseous oxygen. These sensor spots are used for glassware and disposables. The sensor spots are fixed on the inner surface of the glass or transparent plastic material. The oxygen concentration can therefore be measured in a non-invasive and non-destructive manner from outside, through the wall of the ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Needle-type oxygen microsensors are miniaturized chemical optical oxygen sensors designed for all research and packaging applications where a small tip size (< 50 µm) and fast response time (t90 < 1s) are necessary. The optical oxygen microsensors are based on a 140 µm silica fiber and are available with two different sensor tip diameters, a < 50 µm tapered tip and a ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The flow-through oxygen minisensor (FTC) is a miniaturized chemical optical sensor integrated in a flow-through cell. It is connected to the transmitter by an optical fiber. A glass tube with an inner diameter of 2 mm is coated with an optical oxygen sensor at its inner wall. The volume for liquid inside the FTC is about 100 (±10) microliter. The standard flow-through cell can be easily ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Needle-type oxygen microsensors are perfectly suited for measuring oxygen distribution profiles in sediment and biofilms with a high spatial resolution of less than 50 µm. The oxygen-sensitive tip of an optical fiber is protected inside a stainless steel needle. This design is optimal for easy penetration of tissue, septum rubber or packaging materials. After penetration the sensor tip is ...
Manufactured by:Harvard Apparatus based inHolliston, MASSACHUSETTS (USA)
PreSens fiber optic minisensors and space-saving digital-phase transmitters for precise and stable temperature-compensated measurement of pO2, pCO2 and pH in ex vivo organ perfusion ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The OXYPro Series probes can directly be connected to a control unit and are available for different oxygen ranges, from wide range monitoring to detecting ultra-trace O2 amounts. These probes are ideally suited for applications in the biotech sector, the beverage industries or for oxygen monitoring in industrial applications, where they have to stand harsh measurement conditions. OXYPro are ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Sensor Spots (SP) are the most versatile version of non-invasive pH sensors. They are attached to the inner surface of any transparent ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The battery powered Fibox 4 is designed for easy handheld use. The robust, splash-proof housing and controls were contrived to be operated even under harsh conditions while wearing heavy gloves. The oxygen meter adapts to dry or humid environmental conditions, and has temperature as well as automatic pressure and salinity compensation. The Fibox 4 is compatible with sensor type PSt3 (detection ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The flow-through pH minisensor (FTC) is a miniaturized fiber chemical optical sensor integrated in a flow-through cell. It is connected to the transmitter by an optical fiber. The volume of liquid inside the FTC is about 250 microliters. The standard flow cell can be easily connected via Luer-Lock adapters to external tubing. The FTC is beta-irradiated and ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The flow-through cell carbon dioxide mini-sensor (FTC-CD1) is a miniaturized chemical optical sensor integrated in a flow-through cell. The cell is built from a 3 cm glass tube with 7 mm outer diameter with a CO2 sensor integrated and a customized holder (FTC-Holder) fixing the polymer optical fiber for signal transduction. The cell is ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The Microx 4 is a completely stand-alone, portable fiber optic oxygen meter. It can be used with non-invasive sensors & probes (1 mm fiber), and oxygen microsensors (200 µm fiber) in different designs. This oxygen meter is compatible with the wide range of sensors type PSt7 (detection limit 15 ppb, 0 – 100 % oxygen). With its integrated barcode reader the Microx 4 can easily ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The Fibox 4 trace is a stand-alone oxygen meter designed for easy handheld use. Its robust housing is splash-proof, and the controls were developed to be operated even while working under harsh conditions with heavy gloves on. The oxygen meter can adapt to dry or humid environmental conditions, and is temperature compensated. Additionally, it has automatic compensation for pressure and ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The Fibox 3 and Fibox 3 trace are proven fiber optical devices for precise oxygen measurement. These oxygen meters are used in numerous applications in research and industry, like for respiration measurements or monitoring of cell culture and microbial growth - even non-invasively. They are portable due to their small outer dimensions and can easily be set up. Connected to a 2 mm polymer optical ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The pCO2 mini is a precise fiber optic CO2 meter with temperature compensation. It is used with sensors based on a 2 mm optical fiber. A PC is connected to run the user-friendly software. The pCO2 mini is additionally equipped with an analogue output and a trigger input. The compatible CO2 sensors of type CD1 are optimized for physiological ...