- Home
- Equipment
Refine by
Rembe Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Rembe GmbH based inBrilon, GERMANY
The rupture disc that started it all many decades ago. Even now, this forward acting rupture disc is still a good choice for simple applications with medium to high pressures, such as in pumps, in the petrochemical and chemical industries or in hydraulics. The standard operating ratio is up to 70 %1 of the minimum response pressure. The burst pressure is determined by the tensile strength and ...
Manufactured by:REMBE Kersting GmbH based inBrilon, GERMANY
The L-Cell is optimally suited for retrofitting to existing silos; for a reproducible mass measurement whenever the classical level measurement does not achieve the desired result. The measuring cells are used to record the mass of bulk materials and liquids in frame silos. The measuring cells have a particular advantage over level measurements at the top of the silo when core flow occurs in the ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
Fragmentation - free opening across the full width of the vent. This rupture disc is designed to work at standard operating ratios of up to 50 % of the min. response pressure. It is installed directly between flanges and due to its half holes is suitable for all flange systems. A wide range of materials can be used as ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
The domed, single layer explosion vent is suitable for use in processes with medium vacuum or overpressure (up to 70 % of min. response pressure (pstat)) and slight pressure cycling. It is particularly suitable for vessels with pneumatic filling equipment and for filters and sieves with strong vibration. The standard bursting pressure is 0.1 bar at 22 °C (71.6 ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
Flat rupture discs from REMBE offer you fragmentation-free opening across the full width of the vent. Can be produced in virtually any size from DN 20 to DN 1400, for very low pressures from 15 mbarg and with low burst tolerances. For protection against overpressure and vacuum in storage vessels and low pressure systems. Also suitable as a secondary safety device alongside breather valves. This ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
Industrial drying systems always harbor an increased risk of fires and explosions. The fire properties of the media change as a result of the removal of moisture. Especially in spray dryers, caking occurs due to the very high entry moisture in case of suboptimal process control. This Combined CO-Detection and humidity measurement. In addition to monitoring the CO concentration, the system also ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
Extruder rupture discs from REMBE are used in a variety of extruders as well as in plastics processing machines. Pressures of several 1.000 barg and temperatures of up to 600 °C are not uncommon in these applications. The special gas-tight soldered or welded rupture disc membrane is installed directly at the extruder screw. This eliminates the risk of dead spaces where residues can ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
By modifying the design of our existing rupture discs, we have made a crucial improvement: Unlike other high pressure rupture discs, the weld seam is not subjected to shear and bending forces – only to pressure. Anyone with a technical knowledge of this area understands that this makes a major difference. Geometrically separating the area under peak stress and the weld seam makes the ...
Manufactured by:REMBE Kersting GmbH based inBrilon, GERMANY
The MicroCell is optimal for retrofitting to existing silos; for a reproducible mass measurement whenever the classical level measurement does not produce the desired result. The measuring cells are used to detect the mass of bulk goods and liquids in column silos. The measuring cells have a particular advantage over level measurements at the top of the silo when core flow occurs in the silo, ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
The UKB® LS comprises a customisable housing, a reverse acting rupture disc and a three-section knife. This design provides the lowest possible burst pressures while at the same time offering good vacuum resistance even up to high vacuum conditions. The rupture disc and housing are micro-welded and all elements are made of metal. This ensures maximum leak-tightness. Leakage rates of up to ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
Like UKB LS, plug type rupture discs consist of more than just the rupture disc itself – the housing is also part of the product and can be adapted to an extremely wide range of connections and geometries. Above all, plug type rupture discs are used to protect applications with high pressures and connections with small nominal ...
Manufactured by:REMBE Kersting GmbH based inBrilon, GERMANY
Measure powders and bulk materials easily and cleanly. The innovative measurement system for the flow of free-falling bulk materials is an optimal solution for controlling process parameters in hygienically demanding environments. With its dead-space-free stainless steel housing and sensors positioned outside the measuring chamber, the device can be easily cleaned and sterilized. The system is ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
From spray dryers, elevators and chain conveyors to screens with light vibration, silos with mechanical filling and cyclones – the EGV is suitable for use in a wide range of applications in all sectors for both non-pressurised processes and processes with low vacuum or overpressure (up to 50 % of static burst pressure). The standard burst pressure is 0.1 bar at 22 °C (71.6 ...
Manufactured by:REMBE Kersting GmbH based inBrilon, GERMANY
The secure process management for the entire sampling is ensured through connections with contamination-free conveyor systems and analysis options such as grain size, bulk density, or moisture. Continuous quality assurance without manual intervention extends from sampling to packaging. There are various analysis options that provide feedback to the process control ...
Manufactured by:REMBE Kersting GmbH based inBrilon, GERMANY
The UNIBAND® is a stainless steel conveyor belt scale specifically designed for weighing continuous material flows. Its easy integration into existing conveyor systems allows for cost-effective performance and consumption measurement of various bulk materials. Thanks to its low profile, the UNIBAND® can be seamlessly integrated into any conveyor belt for mass measurement. It optimizes processes ...
Manufactured by:Rembe GmbH based inBrilon, GERMANY
EGV HYP was specially developed for demanding hygienic applications in the food and pharmaceutical industries. It is frequently used in critical plants to protect spray dryers, filters or fluid bed dryers. This has been confirmed, among others, by the EHEDG Cleanability Test. Special feature: The patented, full surface, tapered sealing system fits flush with the interior of the explosion vent and ...