- Home
- Equipment
Refine by
Retsch Environmental Equipment & Supplies
28 equipment items found
Premium
Manufactured by:H2O Biofouling Solutions B.V. based inElst, NETHERLANDS
We are selling an unused RETSCH 500µm Test Sieve, designed for high-precision particle size analysis and material separation. This sieve is ideal for use in laboratories, quality control, milling, and industrial processing, ensuring accurate and reliable results. Condition: Unused, like new Mesh Size: 500µm Ideal for: Particle analysis, milling, material separation, and research applications ...
Premium
Manufactured by:H2O Biofouling Solutions B.V. based inElst, NETHERLANDS
We are selling an unused RETSCH 1mm Sieving Mesh, designed for precision particle analysis and material separation. This high-quality sieve is ideal for applications in milling, sieving, and material research, commonly used in laboratories, quality control, and industrial processing. Condition: Unused, like new Mesh Size: 1mm Ideal for: Particle size analysis, milling, material separation, ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 300 is specifically designed for accepting large feed sizes up to 130 mm. The gap width can be set stepless from 1-40 mm. Depending on the sample material, particle sizes down to 5 mm can be obtained, resulting in a crushing ratio of 26. A throughput of up to 600 kg/h is possible with the BB 300. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 400 is specifically designed for accepting large feed sizes up to 220 x 90 mm. The gap width can be set stepless from 0-30 mm. Depending on the sample material, particle sizes down to 2 mm can be obtained, resulting in a crushing ratio of 50. A throughput of up to 400 kg/h is possible with the BB 400. The RETSCH jaw crusher series is available in 8 different sizes. Throughput ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 500 is specifically designed for accepting large feed sizes up to 110 mm. The gap width can be set stepless from 0-11 mm. Depending on the sample material, particle sizes down to 0.5 mm can be obtained in one working run, resulting in an excellent crushing ratio of 220. A throughput of up to 500 kg/h is possible with the BB 500. The RETSCH jaw crusher series is available in 8 ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 600 is specifically designed for accepting large feed sizes up to 350 x 170 mm. The gap width can be set stepless from 6 - 60 mm. Depending on the sample material, particle sizes down to 6 mm can be obtained in one working run, resulting in an excellent crushing ratio of 25. A throughput of up to 3500 kg/h is possible with the BB 600. The RETSCH jaw crusher series is available ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
A faultless and comparable analysis is closely linked to accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotating dividers ensure the representativeness of a sample and thus the reproducibility of the analysis. The sample divider PT 100 divides the sample so exactly that the composition of each fraction of the sample ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes, even for samples with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. The sample grinder substitutes cumbersome hand mortars by a high-performance drive with electronic control. The grinding set can be cooled and heated and is very easy to clean. ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. Thanks to the powerful 3 kW drive with high torque and RES technology, the Cutting Mill SM 300 excels especially in the tough jobs where other cutting mills fail. This mill allows for perfect adaptation to application requirements by variable speed from 100 to 3,000 ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The knife mill GRINDOMIX GM 200 is the ideal instrument for grinding and homogenizing foods and feeds. With two sharp, robust blades and a powerful 1000 W motor, it allows to process sample volumes up to 0.7 liters quickly and effectively. The GM 200 is not only ideal for homogenizing substances with a high water, oil or fat content but is also perfectly suited for grinding dry, soft and ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
A faultless and comparable analysis is closely linked to accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotary tube dividers ensure the representativeness of a sample and thus the reproducibility of the analysis. The rotating tube divider PT 200 is the prerequisite for dust-free division and volume reduction of larger bulk ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 250 is specifically designed for accepting large feed sizes up to 120 x 90 mm. The gap width can be set stepless from 0-30 mm. Depending on the sample material, particle sizes down to 2 mm can be obtained, resulting in a crushing ratio of 45. A throughput of up to 300 kg/h is possible with the BB 250. The RETSCH jaw crusher series is available in 8 different sizes. Throughput ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Cross Beater Mill SK 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials and is easy to operate. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit unit can be used instead of the gravity ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Hammer mills are used for crushing, pulverizing and deagglomeration of medium-hard, hard, brittle, tough and fibrous samples. The rugged RETSCH Hammer Mill HM 200 accepts large feed sizes up to 100 mm which can be reduced to less than 0.8 mm, depending on the sample properties. The mill is ideally suited for processing large volumes batchwise or continuously which ensures high sample throughput. ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction. It can process dry, soft, medium-hard, organic and inorganic substances. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit can be used instead of the gravity ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The BB 50 is the smallest model of the RETSCH jaw crusher series and has been specially designed for sample preparation in the laboratory. The compact machine fits on any laboratory bench and offers safe and convenient handling. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher type, selected gap width and breaking properties of ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content. The provided sieves guarantee an ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Cutting mills are the first choice for the size reduction of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The SM 100 is the budget-priced basic model among the RETSCH cutting mills. It is suitable for the size reduction of samples which don’t require extremely high forces. The mill has been specially designed for routine applications. It is easy to operate and ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Rotor mills are used for high-speed size reduction of soft to medium-hard as well as temperature-sensitive or fibrous materials. The powerful Ultra Centrifugal Mill ZM 300 provides maximum grinding performance combined with ease of use. The variable speed from 6,000 to 23,000 rpm allows for gentle, neutral-to-analysis sample preparation in a very short ...