- Home
- Equipment
Refine by
Specac Environmental Equipment & Supplies
55 equipment items found
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Wire grid polarizers for the mid-infrared spectral range. Our polarizers are available in a wide range of sizes and substrates to suit the required ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Specac’s DC-3 Diamond Compression Cell is designed for FTIR microscope analysis. The DC-3 diamond compression cell enables solid and semi-solid type samples, such as fibers, microplastics, particulates, paint chips, and other small solid matter to be compressed to an ideal thickness for transmission experiments prior to IR spectroscopic ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Quest ATR Accessory is a performance single-reflection ATR-FTIR accessory from Specac designed for laboratory spectroscopic sample analysis in the mid- and far-infrared. With innovative optical design and durable monolithic diamond ATR crystal option, this sets the benchmark in performance and value for ATR ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Specac high temperature/high pressure cell (HTHP cell) is intended for characterization of solid samples, including heterogeneous catalyst systems. It can be heated up to 800 °C and pressurized to a certified 1000 psi with a gaseous atmosphere from up to three gas feeds. It is capable of three analysis modes: transmission, reflectance, and decomposition of ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Useful consumables and supplies for IR spectroscopy. Includes KBr powder, disposable holders for pellets/films ("Specacards") and replacement Al foil for film ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
For routine diffuse reflectance sampling, the Minidiff™ Plus is the ideal accessory of choice. High performance solids analysis is made simple through a minimal alignment optical system. Solid sampling versatility is maintained through the use of standard sampling cups and Diabrase abrasive sampling pads. The sample introduction system reduces the risk of sample spillage, with up to 3 ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Magnetic Film Holder is used for mounting thin transmission windows or polymer film samples in the spectrometer beam. It fits in a standard 3" x 2" slide mount, and has a 25 mm diameter circular aperture and magnetic outer ring ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Hydraulic presses and other accessories for preparation of solid samples for FTIR analysis. The Specac Manual Hydraulic Press has been the mainstay of any analytical laboratory for decades. KBr pellets are easily prepared in minutes using an Evacuable Pellet Die. The Press can be easily upgraded with Heated Platens in order to prepare polymer thin films (when paired with the constant thickness ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Sampling packs provide everything you need to get started measuring the FTIR spectra of solids, liquids or gases. Starter kits bundle together the sampling packs for a cost effective way to maximise your labs ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
These cells are suitable for use with Specac’s range of heated cell holders: the Variable Temperature cell holder, the Electrical Heating Jacket, and the Water Heating jacket. They are demountable and come in static or flow configurations, suitable for a temperature range from +250 to -190 °C. They can also be used standalone with a slide mount ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Polystyrene wavelength standard is a certified wavenumber for calibration purposes, it is made of polystyrene film. It can be used to meet the requirements of FTIR – Mid IR and the wavenumber ranges from 545 cm-1 to 3082 cm-1 (14 peaks). There are two versions, one for ATR in the Mid-IR and the other for NIR region which have additional certified ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Specac’s Water Heating Jacket is designed to allow for the study of solid and liquid samples over a temperature range from just above freezing to circa 90°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by flowing chilled or thermocirculated water around the Water Heating Jacket whilst a particular liquid or solid ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The cyclone is a standard long pathlength gas cell accessory designed with Borosilicate glass body and gold mirrors which are protected. They have been optimized using the latest optical modelling tools to give maximum ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The VariGATR grazing angle ATR accessory is a revolutionary approach to the analysis of monolayers on semiconductor and metallic substrates. The VariGATR™ is variable angle, so the incident angle can be optimized for the highest sensitivity with these types of samples. Its specially designed pressure applicator is optimized for delivering good contact between the sample and the Ge ATR ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Seagull is a powerful accessory for examining powders, optical coatings, opaque substrates, films on opaque substrates, and slightly curved solids by variable angle FT-IR reflectance spectroscopy. This accessory easily adapts for specular, ATR or diffuse reflectance measurements. The Seagull™ operates over a broad range of incident angles without misaligning the system, defocusing the ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Spyder™ is a versatile spectroscopic flow cell ideal for laboratory and small-scale pilot plant settings. Connect it to a near-infrared process analyzer via fiber optic cables to enable smooth, real-time analysis of liquid products as they progress through your continuous chemical ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The APEX 400 hydraulic press is dedicated to the production of pressed pellets for XRF laboratories and other elemental analyses. It is a benchtop press designed for repeated use in high-throughput analytical testing environments, producing sample pellets in steel rings, aluminium cups, or as unsupported ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Specacards are coated in a self adhesive lining to allow for quick and easy sample annaylsis. They come in clear circular and clear rectangular aperture. Cards fit into a 3x2 inch slide ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Manual Press is designed to handle a wide variety of hydraulic pressing applications. They come in 15 ton hydraulic press and 25 ton hydraulic press variations and are especially suited for the preparation of solid samples for XRF analysis. When used with Specac Evacuable Pellet Dies, they are perfect for making KBr discs in FTIR analysis. The Presses can also be used with Specac Heated ...