- Home
- Equipment
Refine by
Thermtest Environmental Equipment & Supplies
14 equipment items found
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The Transient Hot Wire (THW-L1) is widely used for the accurate measurement of thermal conductivity, thermal diffusivity, and specific heat of liquids and ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
GHFM-01 Guarded Heat Flow Meter is designed to test the thermal resistance and thermal conductivity of both homogeneous and heterogeneous materials. The Guarded Heat Flow Meter (GHFM-01) follows ASTM E1530-19 for testing thermal resistance and thermal conductivity of solids, such as metals, polymers, composites and paste from -20 °C to 310 °C. The Thermtest proprietary testing stack, ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
Versatile measurement platform with accurate methods for thermal conductivity, thermal diffusivity, specific heat and thermal effusivity of solids, liquids, pastes and ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The HFM-25 is a portable heat flow meter for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The TLS-100 is a portable meter used to measure thermal conductivity and thermal resistivity of a variety of samples, including soil, rocks, concrete, and ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
An economical meter with a unique selection of transient thermal conductivity sensors for a variety of applications, with a focus on primary measurements. MP-2 users benefit from the convenience and accuracy gained when using primary testing methods. The MP-2 controller auto-detects the connected sensor and loads corresponding testing parameters. Measurements are easily performed with the smart ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
Each TLS-100 comes equipped with the standard 100 mm sensor for testing of soil, soft materials, polymers, and easy to drill materials. The needle sensor is fully inserted into an isothermal sample and a measurement is made with the push of a button. After 180 seconds, results are displayed for thermal conductivity and thermal resistivity. Saved results can also be exported to a computer, via ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The MP-1 is designed to test the absolute thermal conductivity, thermal diffusivity, specific heat, and thermal effusivity of solids, liquids, pastes and powders with the powerful combination of multiple ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
Heat flow meter for measuring the thermal conductivity and thermal resistance of insulation and construction ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
A transient plane source (TPS-3) for testing the thermal conductivity, thermal diffusivity and specific heat of solids, pastes and powders for customers with a limited ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The 50 mm sensor was designed for testing hard samples like rock and concrete. Drilling the required 4 mm diameter x 50 mm hole in rigid samples is easy with the provided masonry drill bit. When testing hard samples, a thermal contact grease is used to enhance contact between the sensor and ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The optional 150 mm sensor is used for in-lab and in-field testing of soil and soft materials according to IEEE 442-2017. The needle is fully inserted into an isothermal sample and measurement is made with the push of a button. After 180 seconds, results are displayed for thermal conductivity and thermal ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The Thermtest Heat Flow Meter Apparatus is a measuring instrument for determining steady-state heat transfer properties, thermal conductivity, and thermal resistance of flat slab specimens in accordance with EN 12667, ISO 8301, and ASTM C518 standards. It is designed for use in industrial test laboratories for quality control of thermal insulation materials of low and intermediate thermal ...
Manufactured by:Thermtest Inc. based inHanwell, NEW BRUNSWICK (CANADA)
The THW-L1 following ASTM D7896-19, is widely used for the accurate measurement of thermal conductivity, thermal diffusivity, and specific heat capacity of liquids and pastes. The THW-L1 was designed with speed and operational simplicity in mind. With a single measurement of 1 second in duration, small volumes of liquids and pastes can be accurately and precisely measured for thermal ...