HEE’s HPC-0800 laboratory fan is ideally suited for lab or backdraft hoods requiring 300 to 900 cfm of air flow with static pressures in the range of 1/8” to 1” maximum. This fan is powerful, light weight and compact. This fan typically operates on 110 volt 60 Hz power and is available with an optional speed controller.
- Molded fiberglass housing
- Direct drive 1 /3 hp O.D.P. motor
- Molded polypropylene impeller
- 8” round inlet and discharge
- Fully rotatable fan housing provides unlimited discharge positions
- Premium quality material and components
- Motor cover
- Vibration isolators
- Inlet or outlet flex connectors
- 0 to 2,000 rpm speed controller
- TEFC or TEEP motors
Hee-Duall Model HPC 0800 laboratory fans are of a centrifugal design with a backward curve wheel design. Each fan is complete with a powder coated steel base and an Open Drip motor with an arrangement 4 direct drive configuration.
Performance data was obtained in a laboratory registered at AMCA per AMCA 210 air performance testing in accordance with AMCA Standard 210-85, ASHRAE 51-1985.
Corrosion-Resistant Construction is used on the fan housing and fabricated from fiberglass using a premium grade corrosion resistant vinyl ester resin with a Class I flame spread per ASTM E84. All hardware is stainless steel and grade 5 electroplated hardware is used to mount the motor to the steel base. The exterior is finished with a UV resistant gel coat with a TAN color.
Wheel Design is a backward curve design and secured directly on the motor shaft. The CCW fan wheel material is polypropylene and a steel plated center hub with a setscrew. The steel hub is covered with a removable black vinyl push on protective cap.
Motor is a heavy gauge steel frame and base motor with an Open Drip Proof (OPD) rating suitable for indoor installations. The 1/3 horsepower 48 frame 1,800 rpm requires a supply voltage of 1/60/115 volts with a 1.0 service factor, with full load current of 6.45 amps. The motor is securely mounted on the fan steel base.
Base is fabricated from carbon steel and sandblasted to an all metal white finish with an abrasive blast before an electrostatic powder coating is applied with a minimum of 2 to 2.5 mils thickens. Standard color is TAN. Anchor bolts and shims are not included.