156 products found

CECO Environmental Products

CECO Adwest

Our Adwest brand has provided cost-effective thermal oxidizers and catalytic oxidation solutions for the abatement of volatile organic compounds (VOCs), gaseous air toxic fumes, and odors from chemical, hydrocarbon, and acid gas process streams. More than 1,000 of our flameless operation Regenerative Thermal Oxidizers (RTOs) have been installed worldwide since 1988, primarily under the Adwestbrand name in North Ameri
CECO Adwest - Model RETOX - Regenerative Thermal Oxidizer (RTO) System

Regenerative Thermal Oxidizer (RTO) Systems use a process of applying very high heat to purify dangerous exhaust air toxic compounds, by oxidizing the exhaust and destroying the gaseous hydrocarbons and waste volatile organic compounds (VOCs) at 1500 F and greater oxidation temperatures. Our Adwest brand RETOX Regenerative Thermal Oxidizer systems are cost-effective and custom-designed to delivery maximum performance, reliability, and efficiency. Our...
CECO Adwest - Volatile Organic Compound (VOC) Concentrators

Our Adwest brand Volatile Organic Compound (VOC) Concentrators are designed for low inlet VOC paint finishing, semiconductor, spray coating, aerospace, composites, fiberglass, pharmaceutical, flexible packaging and coating applications, for maximum performance efficiency, and reliability. VOC concentrators are used in applications that involve a combination of high volume of air with low inlet concentration solvents. Our concentrators are designed to...
CECO Busch

Our Busch International brand has provided global leadership in the design and installation of custom clean air solutions to heavy industry, including fume collection technologies and air quality systems, for more than 60 years. We are recognized worldwide in the Primary Metals industry for providing the “Best Available Control Technology” to capture, convey, and collect emissions from steel and aluminum ro
CECO Busch - Rolling Mill Fume Exhaust

Our custom Busch brand fume exhaust systems for aluminum and steel rolling mills reflect best practices in rolling mill fume and emission control. We are recognized worldwide in the metals industry for providing the “Best Available Control Technology” to capture, convey, and collect emissions from steel and aluminum rolling mills: Rolling mill fume exhaust, Pickle line fume exhaust, Fume exhaust for process lines. We apply our decades of...
CECO Busch Jet Star - Strip Cooling System

Our Busch brand Jet*Star strip cooling system is the most efficient method for air cooling moving strips in the metals industry. Our patented technology utilizes a unique combination of sophisticated aerodynamic and thermodynamic principles, enabling our systems to cool heavier gauge strip at higher strip speeds, while requiring less energy and space.
CECO Busch Jet Star - Strip Drying Uses High-Volume, Low-Pressure Heated Air

The Busch brand Jet*Star strip dryer uses high-volume, low-pressure heated air to rapidly dry moving metal strips. Air flow and thermal energies are applied in an intense and uniform manner, resulting in rapid evaporation from the strip. With decades of experience, we have designed a system that consumes less energy and uses centrifugal fans to reduce noise. Our high efficiency strip drying systems are constructed for uniform drying and stable...
CECO Busch Jet Star - Coil Cooling System

Our Busch brand Jet*Star Coil Cooling System substantially reduces cooling time and store space requirements through the accelerated cooling of metal coils. With improved cooling air distribution and standardized cooling airflow, our Jet*Star patented technology is designed to deliver maximum performance and efficiency.
CECO Busch Jet Star - Strip Blow-off System

Our Busch brand Jet*Star Blow-Off system is designed to effectively remove standing liquid from the top side of flat moving surfaces such as metal strips, glass, laminates or plastics. Our system utilizes the patented Jet*star nozzle to provide an intensive, yet uniform “air plow” to disengage and blow off surface liquid. The Jet*Star blow-off system is an independent air supply system that does not rely on compressed air, ensuring easy...
CECO Busch - Custom Environmental Control System

Engineers in the metals industry commonly design ventilation systems for electrical equipment rooms. The areas of most concern are rolling mill motor room ventilation, transformer vaults, power control rooms, computer rooms, and pulpits. Our Busch brand offers deep expertise in custom designs to achieve environmental control and cooling ventilation in these rooms.
CECO Busch - Model MRV-80 - Self-Cleaning Air Handling Units

The Busch brand MRV-80 custom Self-Cleaning Air Handling Unit is designed to meet your specifications and requirements for space dimensions, construction materials and duct connections. Our enhanced design delivers optimal efficiency and performance and low operational costs with long-life fabric filtration tubes. We can also modify the unit construction for corrosion resistance.
CECO Busch - Model FEF Series - Fugitive Emissions Filtration Units

Our Busch brand Fugitive Emissions Filtration units (FEF) provide secondary emissions control of metallurgical fumes. They are custom designed to fit your specified space dimensions, wiring and connection requirements, and construction material, thereby ensuring optimal performance, efficiency, and operational costs.
CECO Busch - Weld Smoke Collection Systems

Our Busch brand Weld Smoke Collection Systems are durable, high-efficiency systems for the collection of fumes from welding operations. Our systems are engineered to deliver maximum performance, reliability and efficiency on even the toughest production line applications. With years of experience, our products are proven performers even on heavy fume load automotive industry applications. In...
CECO Fisher-Klosterman

Our Fisher-Klosterman brand has been supplying custom-designed air pollution control and product recovery equipment since 1948. Our product line includes high-efficiency to ultra-high efficiency Industrial Cyclones and Venturi scrubbers. Our expertise includes handling the most severe process conditions, such as high temperature, high pressure, erosive particulate, and corrosive gases. In addition, we can design for explosion venting/containment and provide complete engineered systems. Our e
CECO Fisher-Klosterman - Model MS Series - Super Venturi Scrubber

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. With Venturi scrubbers, the dirty gas entering a scrubber is forced at high velocity through a Venturi where it collides with scrubbing water. The tiny water droplets capture particles through impaction and diffusion. The dirty water is then removed in a cyclonic separator and discharged into a recycle...
CECO Fisher-Klosterman - Industrial Cyclones System

Industrial Cyclones utilize centrifugal force to capture, recover or remove large and high-volume dust from industrial applications. Our Fisher-Klosterman Emtrol Industrial Cyclones are specifically tailored to meet your application needs. With both standard and complex custom designs, our high efficiency cyclones can be constructed of carbon, stainless or any alloy steel you require. We take cyclone design very seriously, ensuring that our designs...
CECO Fisher-Klosterman - Model VTS - Venturi Scrubber

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. With Venturi scrubbers, the dirty gas entering a scrubber is forced at high velocity through a Venturi where it collides with scrubbing water. The tiny water droplets capture particles through impaction and diffusion. The dirty water is then removed in a cyclonic separator and discharged into a...
CECO Flex-Kleen

Our Flex-Kleen brand exemplified engineered solutions for a wide variety of dust collectors and particulate control applications and environments for more than 50 years. It has been a leading supplier of dry particulate collection solutions and systems for process dust control, product recovery, nuisance dust collection, and air pollution control since 1959. Our designs for industrial dust collectors meet the most demanding technical challenges associated with corrosive environments, sanitar
CECO Flex-Kleen - Bin Vents

Our Flex-Kleen brand Bin Vents are used to control airborne dust particles, and are designed to deliver high-efficiency and optimal performance with low energy requirements. Each Bin Vent features rugged welded housing, and can be furnished to handle air volumes of up to 5,000 cubic feet per minute, delivering durable and reliable long life service. All Flex-Kleen Bin Vents feature automatic on-line pulse-jet cleaning to ensure quality performance and...
CECO Flex-Kleen - Model CDC - Cartridge Dust Collector

Our Flex-Kleen brand cdc Cartridge Dust Collector is specifically engineered for high collection efficiency, easy installation, and cost-effective and trouble-free operation. With decades of experience and knowledge, we are able to deliver reliable solutions designed for efficiencies up to 99.999%, and dependable long life service.
CECO Flex-Kleen - Model CT Series - High Pressure/High Vacuum Dust Collector

The Flex-Kleen brand CT Series High Pressure/High Vacuum Dust Collecting System is designed to operate in process system environments with minimal maintenance and personnel effort. Applying decades of experience and knowledge, we are able to deliver highly-efficient dust collector solutions designed for optimal performance, reliability and durability, while meeting the most stringent of environmental compliance standards.
CECO Flex-Kleen - HEPA Air Filtration System

Our Flex-Kleen brand (HEPA) High Efficiency Particulate Air Filtration System is engineered for optimal performance, reliability and durability, and designed with bag in/bag out capability to meet the strictest application needs. The bag in/bag out design has a ribbed inlet collar and a PVC bag attachment inside each door. This creates a barrier between maintenance personnel and the contaminated filters to protect workers from harmful particulate and...
CECO Flex-Kleen - Pulse-Jet Dust Collector

Our Flex-Kleen brand Pulse-Jet Dust Collector features a compressed air cleaning design that can be customized to meet a wide variety of application requirements, including hazardous service and sanitary applications. Each unit is configured for optimal performance, delivering excellent filtration efficiency for product recovery systems, large bin venting applications, and general nuisance dust collection.
CECO Flex-Kleen SmartTimer - Automated Dust Collector Controller System

Our Flex-Kleen brand SmartTimer is an automated dust collector controller with pulse-on-demand capabilities and a compact design that can be retrofitted to any pulse-jet dust collector including cartridge collectors. Each SmartTimer is designed to provide up to 80% savings in compressed air costs for more efficient and cost-effective dust collector operations. Our enhanced design delivers optimal efficiency and performance, plus remote monitoring and...
CECO HEE-Duall - Scrubbers

For more than 40 years, our HEE-Duall brand has been a leading global supplier of wet scrubbers, and custom-designed systems and solutions for the collection, handling, ventilation and control of corrosive air streams, including corrosive gases, mists, vapors and particulates. We provide innovative solutions and a diverse line of products and technologies for the purification of air, and the destruction of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), water contaminates
CECO HEE-Duall - Eductor Venturi Scrubbers

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. With Venturi scrubbers, the dirty gas entering a scrubber is forced at high velocity through a Venturi where it collides with scrubbing water. The tiny water droplets capture particles through impaction and diffusion. The dirty water is then removed in a cyclonic separator and discharged into a recycle...
CECO HEE-Duall - Hydro-Lance Wet Particulate Scrubbers

With Venturi scrubbers, the dirty gas entering a scrubber is forced at high velocity through a Venturi where it collides with scrubbing water. The tiny water droplets capture particles through impaction and diffusion. The dirty water is then removed in a cyclonic separator and discharged into a recycle tank. Some of the liquid is continuously purged to limit the solids concentration and allow recirculation back to the Venturi section.
CECO HEE-Duall - Fume and Gas Wet Scrubbers

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. The HEE-Duall brand fume and gas wet scrubbers are custom engineered for quality and designed for most industrial air pollution applications, including scrubbing ammonia gas, chlorine gas, hydrochloric acid (HCL). They are especially effective on water-soluble fumes and odors.
CECO HEE-Duall - High Efficiency Dry Scrubbers

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. High efficiency dry scrubbers are recommended for applications involving the removal of aerosol mist where minimum water usage is paramount, including hydrochloric, sulfuric, nitric and chromic acid scrubbing. With our HEE-Duall brand HEXmaster Dry Scrubber, you will have the lowest pressure drop composite...
CECO HEE-Duall - NOx Control Wet Scrubber

The HEE-Duall brand corrosion-resistant BetaNox Wet Scrubbers provide a unique, high-efficiency wet oxidation/reduction approach to controlling nitrogen oxide (NOx) emissions. Single and multiple stage systems provide more than 99% efficiency on total NOx removal and elimination of the red/brown NOx exhaust plume.
CECO HEE-Duall - Packed Bed Scrubbers for Municipal and Industrial Odor Control System

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. HEE-Duall brand pre-engineered and customized packed bed odor control scrubbers and systems are available to meet customer specific needs.
CECO HEE-Duall - Quencher Scrubber System

HEE-Duall designs and manufactures an innovative two stage scrubber solution for applications involving corrosive air from hot processes and corrosive air contaminants from processes such as thermal or catalytic oxidizers – HCl, HF, SO2, Cl2, HB. We custom design each of our Quencher Scrubbers in accordance with your specific application.
CECO HEE-Duall - Horizontal Wet Packed Bed Scrubber System

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. The HEE-Duall brand Wet Packed Bed Scrubber System comes in two efficient and distinct designs: vertical and horizontal. Each of our design configurations provide a reliable and practical means of removing acidic and caustic mists and gases from corrosive exhaust streams. With years of delivering high...
CECO HEE-Duall - Vertical Wet Packed Bed Scrubber System

Scrubbers are used for gaseous and particulate control, by means of utilizing water, or other liquid, to remove pollutants from an exhaust stream. The HEE-Duall brand Wet Packed Bed Scrubber System comes in two efficient and distinct designs: vertical and horizontal. Each of our design configurations provide a reliable and practical means of removing acidic and caustic mists and gases from corrosive exhaust streams. With years of delivering high...
CECO HEE-Duall - Exhaust Fans

For more than 40 years, our HEE-Duall brand has been a leading global supplier of wet scrubbers, and custom-designed systems and solutions for the collection, handling, ventilation and control of corrosive air streams, including corrosive gases, mists, vapors and particulates.
CECO HEE-Duall - Centrifugal Exhaust Fans

Each of our HEE-Duall brand centrifugal exhaust fans are custom engineered to deliver maximum performance, efficiency and durability, even in the harshest applications. We are a leading brand for corrosion resistant fans for industrial and municipal applications, which are manufactured from fiberglass reinforced plastic (FRP) materials and glass.
CECO HEE-Duall - Inline Centrifugal Exhaust Fans

Each of our HEE-Duall brand Inline Centrifugal Exhaust Fans are custom engineered to deliver maximum performance, efficiency and durability, even in the harshest applications. We are a leading brand for corrosion resistant fans for industrial and municipal applications, which are manufactured from fiberglass reinforced plastic (FRP) materials and glass, providing years of...
CECO HEE-Duall - Radial Exhaust Fans

A radial fan is ideal for use in applications where corrosion resistance and material handling (such as particulate in the airstream) are required. Each of our HEE-Duall brand Fiberglass Reinforced Plastic (FRP) Radial Exhaust Fans are designed to move low to medium quantities of air at high static pressures up to 20+ inches WC. Our self-cleaning wheel design allows materials in the airstream to be...
CECO HEE-Duall - Laboratory Exhaust Fan

HEE’s HPC-0800 laboratory fan is ideally suited for lab or backdraft hoods requiring 300 to 900 cfm of air flow with static pressures in the range of 1/8” to 1” maximum. This fan is powerful, light weight and compact. This fan typically operates on 110 volt 60 Hz power and is available with an optional speed controller.
CECO HEE-Duall - Spark Resistant Construction for Corrosion Resistant Fiberglass Reinforced Plastic Fans

Ventilation equipment used for applications containing potentially explosive gases in the airstream must be properly selected and specified by Engineers and Designers to provide a safe operating system. This data sheet will provide a basic understanding of industry standards and common solutions for these applications.
CECO HEE-Duall - Tubeaxial & Vaneaxial Exhaust Fans

Each of our HEE-Duall brand Tubeaxial and Vaneaxial Exhaust Fans are custom engineered to deliver maximum performance, efficiency and durability, even in the harshest applications. Ideal applications include roof ventilation and odor control facilities where conventional metal fans break down when exposed to the corrosive environment. We are a leading brand for corrosion resistant fans, which are manufactured from fiberglass reinforced plastic (FRP)...
CECO HEE-Duall - Other
CECO HEE-Duall - Aerators and Degasifiers System

Our HEE-Duall brand Aerators and Degasifiers are custom-engineered as efficient and cost effective solutions for the removal of volatile organic compounds (VOC), methyl tertiary-butyl ether (MTBE), hydrogen sulfide (H2S) and CO2, found in groundwater supplies, industrial wastewaters, and process effluents. We apply decades of experience to optimize efficiency, performance and maintenance to ensure quality and reliable products, while maintaining...
CECO HEE-Duall - Air Stripper Tower Systems

Air stripping is an environmental engineering technology used for the purification of waters containing contaminants. Air is forced through the polluted water to remove harmful chemicals, causing the chemicals to evaporate, and the gas is then collected and cleaned while the cleaned water is pulled to the bottom by gravity.
CECO HEE-Duall - Duct, Hoods and Stacks

Offered separately or as an integral component of our scrubber systems, our HEE-Duall brand custom fiberglass reinforced plastic (FRP) exhaust duct, hoods and stacks are an ideal and preferred method of venting in a variety of applications over traditional materials.
CECO HEE-Duall - Fiberglass Reinforced Plastic (FRP) Storage Tanks

Our HEE-Duall brand fiberglass reinforced plastic (FRP) storage tanks are custom-engineered and manufactured in a wide range of shapes, sizes and configurations. We can fabricate tanks quickly and economically, to any specifications. Our engineering staff will also assist you in the design of your tanks, taking into consideration your site-specific conditions such as available space, chemical storage requirements, and applicable seismic and wind load...
CECO HEE-Duall - Model HPE - Mist Eliminator

Mist Eliminators are designed to separate liquids from gas or vapor flow, effectively reducing condensate solids emission. Our HEE-Duall brand HPE Series Mist Eliminator operates utilizing direct compaction combined with centrifugal force to remove liquid entrainmenet from exhaust streams, thereby ensuring maximum performance and durability at minimal investment cost.
CECO KB Duct

Our KB Duct brand is a leader in standard, modular ducting systems (clamp-together and flanged), individual components and application-specific duct solutions for industrial dust, fume, mist and air handling systems. KB Duct began as a part of our Kirk & Blum brand, which has been in operation since 1907.
CECO KB Duct - Standard Clamp Together Duct

Clamp together ducting is applicable to virtually every dust collection system from wood to paper to chemical. And it is also used in fume and oil mist collection, and abrasive applications. Our KB Duct brand Standard Clamp Together/Quick Clamp Duct branches are fabricated from 18-gauge material, and can be fabricated in up to 10-gauge. Also, elbows, straight duct and fittings can be fabricated up to 10-gauge (depending on diameter) for use in such...
CECO KB Duct - Vanstone Flanged Duct

Our KB Duct brand offers duct with and without flanges (angle rings) in black iron, galvanized or stainless steel, and with or without holes. We can manufacture flanged duct from 3” all the way up to the size you could drive a truck through, and we can manufacture lighter gauges to full welded product in heavy gauge (even up to 1/4'), all depending upon the application.
CECO KB Duct - Welded Flanged Duct

Our KB Duct brand offers duct with and without flanges (angle rings) in black iron, galvanized or stainless steel, and with or without holes. We can manufacture flanged duct from 3” all the way up to the size you could drive a truck through, and we can manufacture lighter gauges to full welded product in heavy gauge (even up to 1/4'), all depending upon the application. With our Welded Flanged Duct, the flanges are welded to the duct, either...
CECO KB Duct SparKBuster - Static Mixing Device

The KB Duct brand SparKBuster is a static mixing device that operates by cooling glowing embers within the exhaust ducting system. It cools the sparks by changing the characteristics of the gas flow through the duct from laminar to turbulent flow. This change in type of flow causes a relative velocity difference between the sparks and the gas flowing past the sparks. It is effective when the air temperature in the process is lower than the spark...
CECO KB Duct - Hanging Fume Arms

Hanging Fume Arms provide the most economical and effective methods for the capture of fumes. The use of self-supporting joints, flexible hoses, and smooth bore tubing allow for easy placement of the arm's hood near the source of the particulate and smoke.
CECO KB Duct - Explosion Isolation Valve

The Explosion Isolation Valve is designed to protect your facilities and employees by preventing an explosive force from within a baghouse or filtration system from moving past the valve. Without an isolation valve, if a fire or explosion takes place, burning fuel and explosive force rapidly expands and can enter the building through the suction side duct system, causing severe injury and damage to property.
CECO KB Duct - Blue Advantage Hose

The KB Duct brand Blue Advantage Hose can be used for all industrial duct applications. Its static dissipation is perfect for grounding a ductwork system and the polyurethane (PU) construction materials, with the reinforcement of a PU-coated spring steel wire, make it thicker and tougher than the average rubber hose on the market.
CECO KB Duct - Cut-Offs Use in Industrial Duct & Dust Collection System

KB Duct brand Cut-Offs are an essential part of any industrial duct or dust collection system. Cut-Offs are used primarily to cut off air supply to areas when dust collection/venting is not needed. This can improve performance in other areas or simply limit the size of the needed dust collector. It is difficult to design a...
CECO KB Duct - Angle Rings

Our custom KB Duct brand EZP Rings or Angle Rings go through the electroplating process for galvanization, producing a superior product that is more efficient when welding. Our teams are experienced in providing efficient, reliable and durable products to meet your requirements for your ducting needs.
CECO KB Duct - Air Tight Blast Gates

Our Air Tight Blast Gate is electrically controlled and pneumatically operated, ideal for applications including dust, fume, paper trim, and exhaust. No matter your need, our products are designed to maximize efficiency and reliability, with galvanized and stainless steel construction.
CECO KB Duct - Hose Clamp

The KB Duct brand new Hose Clamp is manufactured with the highest quality materials for a rust resistant and extra strength efficient product for your ducting needs. Our hose clamps work great with the blue advantage hose. These easy to install clamps are available in 2” thru 18” diameters.
CECO Kirk & Blum

Our Kirk & Blum brand is one of the largest and most experienced custom sheet metal and industrial ventilation fabricators in the United States. Founded in 1907, Kirk & Blum is a true pioneer in the market of filtration, fabrication, and installation of the products to meet any air emission compliance standards. Kirk & Blum is renowned for industrial ventilation, compliance and capture of fugitive emissions, and optimizing industrial air processes. From the initial engineering de
CECO Kirk & Blum - Fabrication of Industrial Ductwork Systems

Facilities breathe efficiently when process air handling complements, and works in conjunction with, the capture and exhaust of contaminants. The Kirk & Blum brand Industrial Ductwork systems are engineered for optimum efficiency, performance and operating costs.
CECO Kirk & Blum - Custom Fabrication System

Our Kirk & Blum brand Custom Fabrications are designed and manufactured with the highest quality materials to your specifications and requirements, no matter how complex. Whether we design from a zero base, add to an existing design, or create one part or hundreds, our goal is to help you to optimize quality and performance by using the latest in metal-working technology.
CECO AVC - Rapping

The AVC Specialists brand has been a leader in building voltage controllers, rapping systems, replacement parts for Electrostatic Precipitators (ESPs), and performing maintenance support functions for customers since 1977. The primary industries that we serve include power (coal-fired, wood-fired and biomass), petroleum refining, chemical product manufacturing, and minerals/cement production. An Electrostatic Precipitator is a filtration device that, by passing flue gases through an electric
CECO AVC Hopper Hammer - Electro-Mechanical Device

Our AVC Specialist brand Hopper Hammer is an easy-to-install device designed to deliver optimal performance and efficiency to dislodge particulates from precipitators, hoppers, bins and bunkers (an any other conveyor that tends to have material clog, stick and create stoppages). The discrete, variable rate, with high accelerations caused by the Hopper Hammer are an advantage over the continuous but lower accelerations that are produced by electric or...
CECO AVC - Electrostatic Precipitator (ESP) Voltage Controllers
CECO AVC Powercon - Model 900 - Automatic Voltage Controller System

Our AVC Specialists brand Powercon 900 Automatic Voltage Controller is the latest in our precipitator Automatic Voltage Controller systems, and the choice of many of the largest power generators in the USA. The Powercon 900 voltage controller is designed to be a simple upgrade for our older models, as well as a replacement for most older competitors models.
CECO AVC - Precipitator Supervisory System (PSS)

An electro-static precipitator (ESP) is an industrial emission-control device that is designed to remove particles from an exhaust gas stream by asserting a charge on the particles and having them attach themselves to ground plates on either side of the ionizing source. Two key elements of the operation of an ESP is the high voltage controller, called an Automatic Voltage Controller. It places the charge on the electrodes to ionize the surrounding air...
CECO Filters

Our CECO Filters brand specializes in manufacturing and designing mist elimination products and ‘Turnkey’ package systems. We have been a pioneer, innovator and global leader of candle filter mist elimination technology for more than 50 years. Our customer centric approach strives to deliver efficient and effective solutions in a variety of industries. Our candle filter and mesh pad mist eliminators products are optimized or tailored to capture and remove sub-micron liquid or sol
CECO Filters - Fiber Bed Mist Eliminators

Fiber Bed Mist Eliminators are also commonly known as fiber bed filters or candle filters. Our CECO Filters brand Fiber Bed Mist Eliminators are optimal for capturing and removing sub-micron liquid and soluble particulate from process gas streams, and they are used extensively by facilities seeking to reduce emissions...
CECO Filters - Mesh Pad Mist Eliminators

CECO Filters manufactures and designs Mesh Pad (Demisters) Mist Eliminator products. We have gained a valuable wealth of knowledge and experience over 50 years of operation. Our products are tailored to meet requirements from the design stage to project execution. Our strict quality procedures ensure each mesh pad mist eliminator performs to exact design specifications to give all our customers a guarantee of performance.
CECO Filters - Mist Elimination Systems

CECO Filters’ have over 50 years’ experience and hundreds of world-wide installations for a variety of chemical and industrial applications for complete Mist Elimination Systems and Package Units. As a global leader and pioneer in developing and innovating mist elimination systems, CECO Filters is the ideal partner for mist elimination problem solving solutions.
CECO Filters - Mist Collector (CMC) Systems

Our CMC systems are designed to receive large gas flow rate capacities and are the ideal solution for large chemical and industrial applications.
CECO Filters - Filter-In-Vessel (FIV) System

CECO Filters’ FIV systems are designed for a wide range of gas flow rate capacities. The conventional FIV system are engineered to meet the requirements of various chemical and industrial applications.
CECO Filters - Mist Collector (MMC) System

Our innovative vertical compact design for MMC systems are engineered to meet reduced footprint requirements. MMC System are used in smaller gas flow rate capacities in chemical and industrial applications.
CECO Filters - Model DLM - Compact Single Filter System

CECO Filters’ DLM systems are engineered with a unique compact single filter design to reduce maintenance requirements and footprint. DLM systems are perfect for continuous operations and used within both chemical and industrial applications.
CECO Filters - Filter-In-Duct (FID) Mist Collector System

Our FID systems are small in-line unit, designed to fit into ducting lines to remove mist emission or liquid contaminants from gas streams present within the ducting system.
CECO Filters - Tank-Vent-Filter (TVF) System

CECO Filters’ TVF systems are a single filter unit designed specifically to handle mist emissions or liquid contaminants produced from storage tanks.
CECO Dean - ANSI Chemical Process Pumps

Our Dean Pump brand is recognized worldwide for its high-quality chemical process and high temperature metallic centrifugal pumps. These pumps are manufactured in a variety of metals to handle a broad range of high temperature and chemical process applications.
CECO Dean - Model pH Series - Horizontal ANSI Process Pump

Our Dean Pump brand pH Series Horizontal ANSI Process pump is an end-suction back pull out design, engineered to ensure long, continuous service life at low cost. The fully open impeller design provides smooth inlet passages for solids handling and stringy material, low NPSH, and minimum stuff box pressure.
CECO Dean - Model pHP Series - Self-Priming Chemical Process Pump

Our Dean brand pHP Series Self-Priming Chemical Process Pumps are custom-engineered to meet the demands of a wide range of chemical and industrial applications. Featuring excellent priming times, power frame interchangeability with the pH Series (ANSI) chemical process pumps, and suction lifts up to 20 feet, our pumps are designed to provide high reliability, optimal performance, and easy maintenance.
CECO Dean - Model pHV Series - Vertical Sump Pump

Our Dean Pump brand pHV Series Vertical Sump Pump is custom-designed to deliver maximum efficiency, optimal performance and durability, meeting the demands of your specific application needs. Our pumps are available for vented or vapor containing sumps, and can also be configured for dry pit applications.
CECO Dean - Model M300 Series - Magnetic Drive ANSI Chemical Process Pump

Our Dean Pump brand M300 Series Magnetic Drive ANSI Chemical Process Pump is custom-designed to efficiently meet your specific needs for a sealless pump to handle hazardous toxic fluids. Our Series 300 pump utilizes a synchronous drive system with permanent rare earth magnets to eliminate mechanical seals and virtually end pump shaft leakage, delivering optimal performance and efficiency for smooth operation. Each pump is corrosion-resistant for your...
CECO Dean - Vertical Inline Pumps
CECO Dean - Model DeanLine Series - Industrial Inline Pump

Our Dean Pump brand DeanLine Series Industrial Inline Pump is designed for process plant pump applications for capacities and heads less than ANSI AA and AB sizes. We have manufactured our DeanLine Series pump for optimal performance and efficiency, delivering reliable and durable service for your application requirements. To ensure maximum operational performance, we conduct factory and hydrostatic testing, and each pump can be constructed in two...
CECO Dean - Model DL Series - High Temperature Inline Pumps

Our Dean Pump DL Series High Temperature Inline Pumps are designed for high temperature chemical process applications. With corrosion-resistant construction materials, space-saving configurations, and a close-coupled design that eliminates alignment issues, the DL Series High Temperature Inline Pump is engineered for maximum operational performance, reliability and durability for dependable service. The DL Series High Temperature Inline Pump offers...
CECO Dean - Model CNV Series - Inline Process Pump

Our Dean Pump brand CNV Series Inline Process Pumps are vertical inline, close-coupled process pumps designed to optimize efficiency, performance, and operating costs, while meeting standard environmental processes. Through decades of experience and knowledge, we are able to deliver custom tailored solutions to maximize operations utilizing our...
CECO Dean - Air Cooled High Temperature Pumps
CECO Dean - Model RA Series - Tandem Seal Option on the Air Cooled Thermal Liquid/Hot Oil Pumps

The Dean RA Series offers the Tandem Seal that can be added onto the air-cooled Dean RA Series Pump, which is known for high performance in mission-critical high-temperature, thermal fluid pumping applications.
CECO Dean - Model RWA Series - Air Cooled Hot Water Pumps

Each Dean Pump brand RWA Series Air Cooled Hot Water Pump is designed for heavy duty and high temperature applications, providing efficient, reliable and dependable service for your specific application needs and meeting environmental standards. The RWA Series pump is utilized for hot water, ethylene glycol, propylene glycol, and triethylene glycol, in boiler feed, steam condensate, HVAC and other heat transfer applications, and includes a shaft...
CECO Dean - Model RAV/RWAV Series - Air Cooled Vertical Inline Thermal Liquid/Hot Water Pump

Each of our Dean Pump brand RAV and RWAV Series Air Cooled Vertical Inline Pumps are custom engineered to deliver optimal performance, efficiency and reliability, and are ideal choices for boiler feed, steam condensate return, HVAC, heat transfer, hot oil, and hot water applications. Both RAV and RWAV Series pumps feature a shaft mounted fan to provide air flow over the cooling fins of the pump....
Model RMA5000 Series - Magnetic Drive Air Cooled Process Pumps

Our Dean Pump brand RMA5000 Series pumps are sealless, air-cooled or water cooled, heavy duty process pumps that are designed to provide efficient, durable and dependable service for your specific application needs, while meeting stringent environmental standards.
CECO Dean - Heavy Duty High Temperature Pumps
CECO Dean - Model R5000 Series - Heavy Duty API Type Process Pump

The Dean Pump brand R5000 Series pump is designed for high-pressure and high-temperature applications including chemical processing, petrochemical, refinery, power plants, plastics, heat transfer, pharmaceutical, food processing, and oil and gas.
CECO Dean - Model RM5000 Series - Magnetic Drive Heavy Duty Process Pumps

Our Dean Pump brand RM5000 Series Magnetic Drive Heavy Duty Process Pumps are engineered to meet the demands of a wide range of applications, including chemical processing, petrochemicals, power plants, plastics, heat transfer, pharmaceutical, food processing, and oil and gas. These heavy duty sealless pumps feature centerline-supported casing to eliminate alignment issues, silicon carbide bearings positively held against rotation, Samarium cobalt...
CECO Dean - Model FW - Water Pumps

Our Dean Pump brand FW Water Pump is designed specifically for commercial and recreational water applications including pools, hotels/resorts, water parks, industrial, municipal and wastewater. Available in two sizes, and in both vertical and horizontal configurations, the FW Water Pump is a high-quality, cost-effective solution for your application demands, meeting stringent environmental standards.
CECO Fybroc - Horizontal Pumps

Our Fybroc brand is the world leader in the design and manufacture of Fiberglass Reinforced Polymer (FRP) pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications, including the pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.
CECO Fybroc - Model Series 1500 - Horizontal ANSI Pump

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids, and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges. Each of our Fybroc brand Series 1500 Horizontal ANSI Pumps are engineered for broad corrosion-resistance through the use of high quality materials and state-of-the-art...
CECO Fybroc - Model Series 1530 - Horizontal Close Coupled Pumps

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids, and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges. Each of the Fybroc brand Series 1530 Horizontal Close Coupled Pumps are custom designed with premium quality materials and innovative technology for a lightweight and space...
CECO Fybroc - Magnetic Drive Pumps
CECO Fybroc - Model Series 2530 - Magnetic Drive Close Coupled Pump

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges. Each Fybroc Series 2530 Magnetic Drive Close Coupled Pump is custom engineered to deliver maximum performance, efficiency and durability for a wide range of applications,...
CECO Fybroc - Model Series 2630 - Self-Priming Magnetic Drive Close Coupled Pump

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids, and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges.
CECO Fybroc - Self-Priming Pumps
CECO Fybroc - Model Series 1600 - Self-Priming Pumps

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids, and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges.
CECO Fybroc - Model Series 1630 - Close Coupled Self-Priming Pumps

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges. The Fybroc brand Series 1630 Close Coupled Self-Priming Pump offers the benefits of a close coupled pump integrated with the features of the Series 1600 pump. By combining an...
CECO Fybroc - Vertical Cantilever Sump Pumps
CECO Fybroc - Model Series 5500 - Vertical Sump Pump

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges.
CECO Fybroc - Model Series 5530 - Dry Pit Vertical Sump Pump

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges.
CECO Fybroc - Model Series 7500 - Cantilever Sump Pump

As the leader in corrosion-resistant fiberglass pumping equipment, our Fybroc brand confidently delivers solutions designed to handle corrosive liquids and optimize efficiency and performance. These solutions are tailored to your difficult corrosive or abrasive pump challenges. Our Fybroc brand Series 7500 Cantilever Sump Pump is designed to handle the most severe sump pump applications where supply...
CECO Sethco - Drum Pumps

Our Sethco brand offers a complete line of horizontal and vertical corrosion pumps with capacities to 250 GPM. Manufactured from both high-strength thermoplastics and stainless steel, Sethco products are particularly suited for use in the metal finishing and electronics industries.
CECO Sethco - High Power Sealless Drum Pumps

Our Sethco High Power Sealless Drum Pumps provide safe and fast transfer of chemicals, solvents and other corrosive liquids in hazardous or non-hazardous environments. These pumps are routinely used to empty 55 gallon drums or other similar type containers.
CECO Sethco - High Power Sealless Magnetic Drive Drum Pumps

Our Sethco High Power Sealless Magnetic Driven Drum Pumps provide safe and efficient transfer of corrosive liquids, concentrated acids and alkalis, solvents, light oils and volatile liquids from carboys and drums.
CECO Sethco - Magnetic Drive Pumps
CECO Sethco - Magnetic Drive End Suction Pumps

Our Sethco Magnetic Drive End Suction Pumps are precision designed to meet the demands of a wide range of OEM, chemical and industrial applications. These pumps can be used for highly corrosive or mild chemicals, acids or solvents. Their simple efficient design provides reliable, trouble-free performance and easy maintenance.
CECO Sethco - Magnetic Drive Self-Priming Pumps

Our Sethco Magnetic Drive Self-Priming Pumps are precision designed to meet the demands of a wide range of OEM, chemical and industrial applications. These pumps can be used for highly corrosive or mild chemicals, acids or solvents. Their simple efficient design provides reliable, trouble-free performance and easy maintenance.
CECO Sethco - Horizontal Pumps
CECO Sethco - Forged CPVC End Suction Pumps

Our unique Sethco forged CPVC casing design and rear pullout assembly assures long pump life with minimum maintenance for a variety of corrosive applications.
CECO Sethco - Model 316 - Stainless Steel End Suction Pumps

Our Sethco 316 stainless steel end suction pumps are ideally suited to a wide range of chemical, laboratory and processing applications. They provide excellent corrosion resistance to corrosive liquids.
CECO Sethco - Thermoplastic Chemical Sump Pump

Our Sethco Thermoplastic Chemical Sump Pump UD/UV Series heavy duty industrial sump pumps are ideally suited, structurally and hydraulically, for heavy-duty service. They provide outstanding mechanical strength at elevated temperatures and excellent chemical resistance to concentrated acids and alkalis.
CECO Sethco - Filter Media
CECO Sethco - Wound Polypropylene Depth Filter Cartridges

Our Sethco filter tubes are fabricated of natural or synthetic fiber wound over a perforated plastic or metal core. The precision winding pattern covers the entire depth of the filter tube with hundreds of funnel shaped tunnels which become gradually finer from the outer surface to the center of the tube and trap progressively finer particles as the fluid travels to the center. This allows much greater solids retention capacity than is...
CECO Sethco - String Wound Cotton Depth Filter Cartridges

Sethco String Wound Cotton Depth Filter Cartridges are fabricated of natural or synthetic fiber wound over a perforated plastic or metal core. The precision winding pattern covers the entire depth of the filter tube with hundreds of funnel shaped tunnels which become gradually finer from the outer surface to the center of the tube and trap progressively finer particles as the fluid travels to the center. This allows much greater solids retention...
CECO Sethco - Pleated Polypropylene Filter Cartridges

Our Sethco brand Pleated Polypropylene Filter Cartridges feature an extended filter surface for greater dirt holding capacity compared to conventional cylinder, sleeve or wound type depth filter tubes.
CECO Mefiag - Compact Disc Filter Systems

Our Mefiag Filtration brand is a world leader in the development, manufacture and supply of corrosion-resistant filters and pumps used primarily in the plating, anodizing, and metal finishing industries. Founded in The Netherlands in 1953, Mefiag built its first filter unit for the electroplating industry almost 60 years ago. Today, a large variety of filters and pumps are also available for other applications including the automotive, construction, and sanitary industries.
CECO Mefiag - Model CD Series - Compact Disc Filter Systems

Our Mefiag brand compact disc (CD) systems, with capacities to 450 gph are suitable for lab applications and small plating tanks. In-tank (ITPS), pedestal mounted (PMFS) and self-priming pedestal mounted (SPPM) filter systems are available.
CECO Mefiag - Polypropylene Electroplating Filter Systems
CECO Mefiag - Model PP Series - 0310/0620/0640 - Polypropylene Electroplating Filter Systems

Our smallest Mefiag brand Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 600 to 1,600 gph.
CECO Mefiag - Model PP Series - 2500/3500/4500 - Polypropylene Electroplating Filter Systems

Our Mefiag brand mid-range Polypropylene Electroplating Filter Systems units feature horizontal disc technology and capacities from 2,500 to 4,500 gph.

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.