Tramfloc - Model 908 -Metal Precipitant

PRINCIPAL USES:
Tramfloc 908 has been formulated to remove heavy metals from industrial process waters including effluents of plating baths, etching solutions, and rinses containing soluble metals. Tramfloc 908 will reduce the concentration of the following metals to acceptable levels within regulatory requirements: AG, AU, CD, CO, CR, CU, FE, HG, MN, Nl, PB, and ZN.

PHYSICAL DATA:
APPEARANCE: Black Solution ODOR: Slight SPECIFIC GRAVITY: 1.30-1.37 PH 13.0-13.8

HANDLING AND STORAGE:
As with any chemical, this product should be handled with reasonable care. See the Material Safety Data Sheet for complete handling information. Avoid contact with skin, eyes and clothing. Do not take internally.

DOSAGE:
Bench scale jar testing will help determine the optimum dosage. Ask for our information bulletin on performing such testing. To optimize the dosage, oxidizers present in solution must be destroyed (reduced) prior to dosing Tramfloc 908. In full-scale installations, the dosing of Tramfloc 908 is most efficiently accomplished with an automatic feed control system.

FEEDING:
Adjust the solution reaction will take at pH between 6.0-9.0 prior to adding Tramfloc® 908. The metal precipitation )OUt 30 minutes. In some applications, iron coagulant ingredient will help the coagulation and clarification operations, feeding to the metal bearing stream. Tramfloc 908 should be diluted to a 10% solution for feeding to the metal bearing stream.