Twin Dilution Probe - Model X-TDP -TCR Tecora
X-TDP (Twin Dilution Probe) is the last frontier of the gas sampling in stationary source emissions and process! Born from experience in the field and with the help of whom daily, it is faced with the need to operate with equipment that simplifies the collection of gas and allow to carry out several activities at the same time. Nonetheless, this solution allows a savings on investment compared to the systems currently available on the market. The project in compliant and summarizes all the standards on non-isokinetic sampling.
Titanium! X-TDP is produced as a variant in this material, mandatory for sampling of acids and other chemically similar substances.
Unique in the market! Double sampling line with two divided dilution chambers. X-TDP can be used with two different dilution systems. Furthermore, in case of use with FID analyzer, this, by intrinsic features, can not be connected in common to other suction lines.
Indeed, FID analysis chamber suffers from the smallest variations of pressure that can slightly change the combustion of the hydrogen flame.
Particulate membrane filter. Device protection downstream (analyzers) or entry into the bubblers of undesirable solid bodies are ensured by practical 25 mm external filter holders.
Possibility to set sampling temperature.
Unlike self-regulating systems that suffer from problems due to hysteresis and temperature changes environment, the use of two PID electronic regulators (on the sampling tube and on the dilution chamber / portafilter) ensure constant heating in all weather conditions.
According to CEN/TS 13649 standard (VOC sampling on vial) the uncertainty of temperature regulation must be
Housing for connecting two heated lines.
As an option 2 PID electronic temperature controllers are available.
- Double line sampling probe and double dilution chamber;
- Also available in AISI316L stainless steel;
- Suction lines internal diameter 6 mm;
- Removable probe terminal part for internal cleaning;
- Sample filtration with 25 mm diaphragm;
- Setting the heating temperature up to a maximum of 200 °C;
- PID electronic regulators with low temperature and display alarm
- through luminous led;
- Outlet connection for heated lines with external pipe of ø 6 mm
- (other diameters upon request);
- Probe containment case and integrated heating management
- system (IP68 connectors for external connections);
- Standard probe lengths: 350 and 700 mm (others on request);
- Available option with single line (X-STD);
- Available power supplies: 230VAC | 110VAC
- Suitable for all sampling situations;
- Available in Titanium and AISI316L;
- Controlled temperature with PID electronic controllers;
- No cold points!
- Probe: Titanium Gd2 C or AISI 316L stainless steel
- Dilution chamber: Titanium Gd2 C or AISI 31 6L stainless steel
- Sample filter: Membrane 25 mm
- Collection tube length: 350 or 700 mm (others on request)
- Temperature requlation tube and dilution chamber: Digital Controllo PID
- Max. process temp.: 500° C
- Max. probe temp.: 200° C
- Supply: 230 VAC 50-60Hz | 110 VAC 50-60 Hz
- Probe dimensions: Total Ienght 200 mm + sampling probe
- Suitcase size: 450 x 330 x 180 mm
- Probe weight: 850 gr