Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.
The measurement of gas flow in large ducts or pipes offers its own set of challenges. Large ducts and pipes often have swirls or turbulence in them which makes measurement of true gas flow difficult. Sierra has developed a number of solutions to this vexing problem, including stand-alone flow conditioning elements and multiple arrays of thermal sensors. By including hot taps and purging systems, such arrays can be very flexible.
From bulk gas delivery to cleaning to purging operations, Sierra`s mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra`s mass flow meters and controllers a tool-makers choice.
Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.
According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, etc.
Cargo containers and wooden packing materials are fumigated to control the spread of pests and micro-organisms. However, fumigant gases are toxic and present a danger to human health even at low concentrations. Additionally, products shipped in containers may release VOCs from the solvents, coatings and glues used in manufacturing processes, and the concentrations of these vapors may be significant in the confined space of the container. Gas measurements are required to protect the health of any workers involved...
At the present moment products from RIDGIT are quite popular on the market. People like them for their ruggedness, good design, and wide selection of options. Here at Fiberscope.net we offer a very good selection of different devices for remote visual inspections. In most of cases our cameras have comparable quality, with the same or even better technical characteristics as SeeSnake tools, but at more competitive prices.
Temperature measurements play critical roles in a number of diverse industrial processes. AMETEK Land provides expert solutions to support product quality, process efficiency, safety and emissions control. Our industry-leading non-contact measurement instruments deliver essential temperature data for industry sectors including metals, non-wovens, paper and plastics. We also supply effective emissions monitors and conveyor belt scanners. AMETEK Land has more than 70 years’ experience in providing comprehensive...
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we’ve pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ownership.
Measurement of mercury content in hair is a convenient technique to estimate dietary exposure without having to handle tissues or bodily fluids. As the mercury present in hair is comprised of different mercury species, full speciation of the compounds is needed for complete understanding. Environment Canada published a technique where treating a basic digestion with Cd2+ in the presence of cysteine allowed analysis of inorganic mercury and total mercury using a Tekran 2600 System. Methyl mercury was then calculated...
Determining chlorinated organics in waste water of the oxychlorination process is for reasons of environmental compliance. The on-line analyzer system uses a scrubber system where a carrier flow is bubbling through the water. The vapor phase is measured by a Flame Ionization Detector (FID) and is a measure for chlorinated organics of the water.
The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to production units downstream. This is determined at two sampling points in the process: EDC purification unit – top Light Column. EDC purification unit – top Heavies Column. For all other analytical solutions in the chlorination process, please browse the On-line Analyzers Suite under Products & Solutions.
The purpose of determination of moisture in dry chlorine is threefold: prevent corrosion, prevent formation of ferric chloride and control the overall drying process. AppliTek offers two different solutions for determination of moisture: one traditional method by means of an amperometric phosphoric pentoxide (P2O5) electrochemical cell, or a more advanced technique based on tunable diode laser technology (TLDS). Both analyzer systems are installed in a compact protective corrosion resistant cabinet.
Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts of...
Various food additives – preservatives (benzoic acid, sorbic acid, and their salts), sweeteners (Acesulfame K, saccharine and its salts) and others are widely used in food industry for the improvement of food products properties and extension of storage life. The amount of these additives in food products is regulated by technical instructions and other norms.
In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air
Protea can offer online siloxanes analysis using our atmosFIR gas analysers. This allows the real time measurement of siloxanes on plant. We can offer portable siloxanes analysers or fixed siloxane measurement systems.
The method is intended for determination of hesperidin and naringin using capillary electrophoresis technique in order to reveal adulteration of juices. These components are tested in citrus juices, concentrated juices, nectars, juice-containing beverages, and fruit sauces that are produced primarily from oranges, grapefruits, tangerines, lemons, and limes.