Only show results available in Virginia? Ok

Waste & Recycling Applications

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Water treatment equipments for oil & gas industry

    Genesis Water Technologies understands the consistently evolving and increasing demands for high quality water in the oil & gas industry and the necessity for sustainable produced water treatment solutions to handle the evolving challenges faced by this industry.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Water treatment solutions for the oil & gas industry

    Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Oil & Concentrates Analyses

    By Innov-X Canada based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Water and wastewater valve solutions for oil and gas industry

    Oil and Gas industry includes exploration, extraction, refining, transporting, and marketing petroleum products. The largest volume products of the oil and gas industry are fuel oil and gasoline. The industry is usually divided into three major components: upstream, midstream and downstream. Xinhai valves meet oil & gas industry upstream, midstream, downstream demands of reliability, corrosion resistance, temperature, pressure, vibration, etc.

    By China Xinhai Valve Manufacturer Company based in Wenzhou, CHINA.

  • Waste tyre to oil recycling process pyrolysis plant

    Waste tyre to oil recycling process pyrolysis plant the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution. Waste tyre to oil recycling process pyrolysis plant advantages: 1. One week installation:no need to build foundation thus shorten the construction period, 4th and 5th machine installation period is one month, 6th machine install only need one week. Also easy to move. 2. Service life: Special design inside the reactor to avoid direct heating, so machine service life prolong to 3-5 times and the heating energy can realize 100% utilization. Contact: Ms Bonnie Phone: +86-371-5677 1821 +86 15893800169 Skype: bonniezhao2 Email: oilmachine@doinggroup.com www.wastetireoil.com www.doinggroup.com

    By Henan DOING Renewable Energy Equipment Co.,ltd based in Zhengzhou, CHINA.

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Tank Bottom Remediation

    With a Vulcan® Systems Thermal Desorption Unit, hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Solutions for oil & gas industry

    In crude oil refining, our technologies are successfully applied during plant turnarounds to remove pyrophoric iron sulfide scale, reducing the threat of exothermic reactions and toxic sulfide odor production.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • High performance separation system for silicones industry

    Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone resin.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Wilsa ElectroWaveTM - Oil Harvesting / Removal

    WILSA Harvests Oil from Tank Bottom Sludge at Disposal Well. ElectroWave™ Technology optimizes onsite processing and reduces costs associated with saltwater disposal operations by breaking waste emulsions and recovering additional oil.

    By Hudson Industries based in Vienna, OHIO (USA).

  • High performance separation system for caustic treating industry

    The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the hydrocarbon phase.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you