Waste Disposal Applications

45 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste Disposal ×

Wilsa ElectroWaveTM - Oil Harvesting / Removal

by Hudson Industries     based in Vienna, OHIO (USA)

WILSA Harvests Oil from Tank Bottom Sludge at Disposal Well. ElectroWave™ Technology optimizes onsite processing and reduces costs associated with saltwater disposal operations by breaking waste emulsions and recovering additional oil.

Industrial dedusting

by GGE srl     based in Rio Saliceto, ITALY

The industrial dedusting field is very varied and branches out in numerous specialized branches. For a preliminary examination of the problem it is necessary to dispose of two series of data: characteristics of the system which emits the pollutants; nature of pollutants and their characteristics.

Wastewater treatment solution for the mining & power generation industries

by Schwing Bioset, Inc.     based in Somerset, WISCONSIN (USA)

From the remote Canadian wilderness to the mountainous regions of South America, Schwing Bioset piston pumps are called upon for reliable service in some of the harshest environments on the planet to pump tailings to surface and sub-surface disposal. Schwing Bioset Fluidized Bed dryers and conditioners are trusted when reliability and performance are a must to process coal at your power generation facilities. Schwing Bioset piston pumps can be used to pump wood waste, coal slurries and fly ash at ethanol and power stations to simplify material handling requirements.

Flares for Safe Disposal of Waste & Toxic Gases

by Synchronous International Engineering Solutions Co. Ltd.     based in Bangkok, THAILAND

Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA based solutions Customized & Cost effective project specific solutions Successful Installations of various types of flares at various locations.

Waste Management Issues

by PP `Tehnologia O`     based in Vinnytsia, UKRAINE

• Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013); • Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013); • Inventory of Waste (the detection, identification, description and registration of waste, amounts accounting of their formation, recycling and removal; the identification and examination of waste's places and objects of waste operation); • Development of guidelines for safe waste disposal; • Development of technical passports of different hazardous wastes; • Development of a Passport for a Sites for the Disposal of Waste (PSDW).

Drinking water solutions for the coagulation optimization

by Real Tech Inc.     based in Whitby, ONTARIO (CANADA)

Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization of the polymer dosing heavily depends on the concentration of organics.

Mining & minerals solutions for precious metals industry

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech designs and manufactures a full range of thickeners for the minerals industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners, AltaFlo Thickeners, and Deep Bed Paste Thickeners. Design-build and turnkey projects are our specialty. Our reputation for excellence has been built one project at a time. Stateside and worldwide, WesTech provides a wide range of process equipment to help maximize the value of your resources.

Mining & minerals solutions for minerals processing industry

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech designs and manufactures a full range of process equipment for the minerals industry in the USA and worldwide, including highly efficient HiFlo Thickeners, and Deep Bed and TOP Paste Thickeners for product concentration, tailings disposal, and CCD circuit washing. Each project is completely shop pre-assembled prior to delivery at job site. With 40 years of experience and full ISO 9001:2008 certification, we meet project deadlines and production schedules.

Recycling Systems for the municipal solid waste processing sector

by Macpresse Europa S.R.L     based in Vernate, ITALY

MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in transfer stations and delivered to landfill sites.

Recycling equipments for shredding hazardous waste

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

Disposal and Cleaning Equipment for Waste Water Industy

by HydroVision GmbH     based in Kaufbeuren, GERMANY

Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

Waste recovery for organic wastes e.g. PCBs & Dioxins

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Tetronics` technology destroys organic wastes including Polychlorinated Biphenyls (PCBs) and other types of Persistent, Bio‐accumulative, and Toxic (PBT) pollutants at very high efficiencies across a wide range of concentrations.

Waste recovery for nuclear wastes

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

Several waste gas streams: Short, high concentration peaks and a constant |medium concentration

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Concentration peaks and liquid waste posed a tough challenge on the air pollution control system. With the CTP solution, this waste is not only disposed of but also reduces the burner energy considerably.

NORM Waste

by econ industries GmbH     based in Starnberg, GERMANY

Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

Waste management for hotels and resorts

by Terragon Environmental Technologies Inc.     based in Montréal, QUEBEC (CANADA)

Yet, while the people living in today’s wealthy societies can easily escape their every day life and enter the pristine world of unspoiled nature, they cannot escape their propensity for generating garbage. On average, a person generates about half a kilogram of solid waste plus approximately 300 liters of wastewater per day. Tourists frequently generate more waste than the average. Thus, a resort that hosts about 300 guests and staff will generate over 50 tonnes of solid waste and 30,000 tonnes of wastewater per year. Where does a resort located far away from any conventional waste treatment facility dispose of all this waste?

Industrial and commercial water filtration for municipal & industrial waste water

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

Whether your specific water usage is for Industrial, Commercial or Municipal purposes all application have one thing in common-waste.  Hydro-Gen’s range of industrial/commercial water filtration systems suit a wide range functions allowing you to reduce overall water and industrial waste-water disposal costs.

Solid waste management @ source:

by EcoCare Technologies     based in Chennai, INDIA

Any industry that is producing a food waste that can be handled and disposed / treated in our system safely, conveniently, and hygienically.

Bins for cooking fats, oils, food wastes, liquid slops, slaughterhouse wastes and animal by-products

by P. Henkel GmbH     based in Kreuztal, GERMANY

The FATBOXX and FATBOXX max are perfectly new waste bins for disposing of cooking fats, oils, food wastes and liquid slops and slaughterhouse wastes and animal by-products. The special construction of the body and lid offer many benefits for end consumers and waste management companies.

Industrial briquette presses for paper briquetting

by WEIMA     based in Ilsfeld, GERMANY

There is no such thing as “just waste”. Business leaders are well aware that even the smallest parts of production waste have a value. By pressing foamed plastic for instance, the waste volume can be compressed at a rate of 30:1 saving storage space, disposal and transportation costs. A number of other plastics like Styrofoam that are very bulky and light weight can be utlised in this process, they include; cellular material, PUR-foam etc.. Reduce disposal costs and simplify handling with WEIMA!

Need help finding the right suppliers?

Let the XPRTs do the work for you