Air Filtration Articles

  • Regenerative Thermal Oxidizer Installation #1655 - Case Study

    An Filter Media Manufacturer Updates Pollution Control System in Feasterville-Trevose, PA A filter media manufacturer adds air pollution control system manufactured by Alliance Corporation. Application: Converting – Feasterville-Trevose, PA Project: A 4,000 SCFM KRONUS™ Regenerative Thermal Oxidizer. Installed by ...


    By Alliance Corporation

  • On PM 2.5 Filters, Let’s just clear the air between us; ok?

    In the area of a former military building complex in the Chaoyang District of Beijing is a unique and thriving artistic community.  In the middle of this art district, is a strange 7-meter tall tower shaped like an avant-garde metallic pineapple.  Designed by Dutch artist Daan Roosegaarde, it is both an artistic creation and a functional tool meant to test a possible solution for ...


    By Sterlitech Corporation

  • Optimising existing equipment with Bioconservación products

    As part of its technical support service offered to clients on an ongoing basis, Bioconservacion conducted an efficiency study at the express request of one of its customers. The study explored solutions to improve efficiency in eliminating odours origintating from biological reactors through the use of horizontal deodorisation systems. The objective was to guarantee the ...


    By Bioconservacion SA

  • TurboScrubber® & TurboStripper® ‘TURBOCC’ Technology, for Flue Gas Cleaning & Carbon Capture System for Enhanced Plant Growth

    The plant would be supplied in a number of preassembled skid mounted packages for installation and connection on site. Typically these packages would comprise:  TurboScrubber®, water sump, recirculation pumps (run & standby), local water circulation pipework, forced or induced draft flue gas fan and local flue gas ductwork.  TurboStripper®, water sump, recirculation ...

  • Case study - Filtration for Alcan (France) swarf recovery at an aluminium billet plant

    In 1998 this Glosfume ceramic filter system was originally installed at British Aluminium plant in the UK to filter oily fumes from an induction furnace smelting oily swarf recovered from billet sawing. The filter is injected with 2C talc before being recycled back to the inlet ducting. At a pre-set time, the talc is discharged to a collection drum and the cycle is repeated. During 2006 British ...


    By Glosfume

  • Case study - Municipal Incinerator (Slovenia)

    WID and BREF-compliant EU showcase municipal incinerator in Slovenia During 2008 Glosfume was asked to supply a ceramic filter which could achieve emission levels below WID. Representing the state-of-the-art in high temperature filtration design rated at 70,589 Am3/hr @ 250 °C. The installation complies both Waste Incineration Directive (WID) and BAT Reference note ...


    By Glosfume

  • Case study - WID-compliant Wessex Incineration (UK)

    This installation was Glosfume's first use of a new process designed to incorporate an innovative 'radiant heating tube' which allows fumes to cool prior to filter without the need for dilution air and/or a heat exchanger. This design has subsequently been successfully utilised on several similar rotary incinerator installations. The plant was the first to comply with strict Waste Incineration ...


    By Glosfume

  • Case study - Smelting of Secondary Aluminium (UK)

    Filtration for induction smelting of aluminium scrap Coleshill Aluminium Ltd purchased their first ceramic filter from Glosfume in 1994. Since then, we've developed a close working relationship and over the past 18 years, Coleshill have purchased four filter units, most recently in 2005. During induction smelting, contaminated aluminium scrap is converted into ingots and the ...


    By Glosfume

  • Case study - OTMS Boxed Beef Incinerator (UK)

    Over Thirty Month Scheme (OTMS) 'Boxed Beef' incinerator. This installation involved replacement of a 3-metre ceramic element filter that suffered constant element breakages and inadequate SO2 removal due to a poorly designed filter and powder injection system. The client appointed W.S. Atkins to source a filter which had high efficiency particulate removal and effective dry ...


    By Glosfume

  • Case study - Aluminium Scrap Decoating US Granules (USA) 2001

    HCl emissions reduced from 1000mg/Nm3 to 5mg/Nm3.  Process: To recover aluminium scrap from plastic foil. A Glosfume high temperature ceramic filter system replaced an existing bag filter that had suffered severe corrosion. This was due to being operated at low temperatures, combined with extremely high HCl levels, during aluminium scrap decoating. Lime injection ...


    By Glosfume

  • Spiral bevel gear bolts - B&W Roll Wheel™ Pulverizer gearbox - Case study

    Purpose To alert owners and operators of B&VV Roll Wheel™ pulverizers of a possible problem with the bolls on the spiral bevel gear (See Figure 1). Problem The constant cyclic loading In the B&W Roll Wheel™ gear drive may cause the spiral bevel gear bolts to work loose. Once loose, the bolts experience an additional bending load, thus ...


    By Babcock & Wilcox MEGTEC LLC

  • RTO upgrade sees significant benefits - Case Study

    A project this year to upgrade an existing RTO has been successfully completed in four areas: Increasing thermal efficiency by adding additional layers of ceramic honeycomb media into the RTO this has the benefits of energy reduction from lower gas consumption both during production & on standby. De-commissioning an old inefficient recuperative oxidiser which was attached to a single ...


    By AirProtekt Limited

  • Diesel Particulate Filters in the City of London - Case Study

    The catalysed wall flow soot filter was designed and installed in the fourth quarter of 2008 to treat the Particulate Matter (PM), Volatile Organic Compounds (VOCs) & Carbon Monoxide (CO) in the exhaust gases from the outlet of an MTU 12V000G23E emergency generator installed in the basement in the financial district London EC2R. AirProtekt Catalysed Wallflow Particulate Filter is a system ...


    By AirProtekt Limited

  • Molecular gas filtration: chemisorption versus physisorption

    Advantages of chemisorption over physisorption in molecular gas filtration. To remove pollutant compounds in air, both spherical and pelletized solid products are widely used. Examples of their application include Indoor Air Quality, Corrosion in Control Rooms, In Vitro Fertilisation, and Odours. What all these ...


    By Bioconservacion SA

  • Thermal Oxidiser - Scottish Leather Group - Case Study

    Project Details Customer Name: Scottish Leather Group The Brief:  Scottish Leather were sending 30, 000 tonnes of waste to landfill each year. Turn that waste into heat and steam for processing leather and heating water Location of Installation: Bridge of Weir, ...


    By Process Combustion Ltd

  • Why coolant filters are a must for CNC Machining Applications

    There are several reasons why your shop floor should be using the latest in CNC coolant filtration systems to help keep the coolant system working properly. Most in the industry are well aware of how much money coolant filtration systems can save a company over the course of a ...


    By Filtra Systems

  • Air Sentry Breathers - M series

    M-Series breathers are designed from heavy-duty materials capable of handling the requirements of the most severe environments. They replace the standard breather ...


    By Enluse B.V.

  • Air Sentry Desiccant Breathers

    Enluse B.V. is  supplier of Air Sentry® breathers that increase efficiency, prolong fluid life, reduce maintenance costs and downtime.  In a series of 4 we’ll discuss successively: ·         ...


    By Enluse B.V.

  • Advantages of Using Flow Meters to Reduce Pressure Drop

    Plant operators rely on plant air pressures to maintain properly working equipment and systems. One of the most common problems affecting processing plants that utilize compressed air systems is the ability to maintain reliable air pressure throughout the distribution system. Insufficient air pressures may be due to undersized distribution piping, but it’s more commonly found that the cause ...


    By FLO-CORP

  • The use of potassium permanganate, ozone and associated coupled processes for odor removal in drinking water: bench and pilot scale tests

    Bench and pilot scale experiments were conducted to investigate and compare the preoxidation effects of potassium permanganate (KMnO4) and ozone (O3) for odor removal in drinking water. The effects of dosage, contact time, pH, as well as couple treatment with a granular activated carbon (GAC) filter were examined using bench experiments, while the effects of KMnO4 dosing ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you