Only show results in Connecticut? Ok

Applications

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Air pollution control solution for electronics industry

    The semi-conductor, circuit board and electronics industry have multiple applications for air pollution control equipment from the control of cleaning solvents and acid gas to the capture of particulate matter.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Temperature and gas sensing solutions products for industrial electronics

    Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you`re faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction requirements.

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA).

  • Premium

    VOC abatement equipments for electronics

    Managing overall environmental control is essential for electronics manufacturing processes and operations as well as facilities like battery dry rooms that provide mission critical low dew point conditions.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    Water treatment chemicals solutions for electronics industry

    In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems . Kurita...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Chemiluminescense based analyzer for semiconductor applications

    NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential....

    By ECO Physics AG based in Duernten, SWITZERLAND.

  • Premium

    Temperature and gas sensing solutions products for semiconductor manufacturing

    Enable advanced plasma processes control via highly accurate power delivery, frequency tuning, and multi-level pulsing. To manufacture leading-edge integrated circuits (ICs), new processes and materials are deployed for transistor or memory cell creation. Declining feature size and atomic-level precision make extreme process control essential. And new device architectures (3D-NAND and Fin FETs) drive multi-patterning (double and quadruple) demand — making innovative etch and deposition processes vital.

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA).

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Recycling equipment for shredding electronic scrap (E-scrap)

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Advanced water purification technologies for semiconductor and electronics sector

    High-technology industries use ultrapure water in their manufacturing. SnowPure’s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these systems.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Elemental Analysis for Semiconductors & Magnetic Media by EDXRF / XRF

    Semiconductor device fabrication is the process used to create the integrated circuits (silicon chips) that are present in everyday electrical and electronic devices. It is a multiple-step sequence of photographic and chemical processing steps during which electronic circuits are gradually created on a wafer made of pure semiconducting material. Silicon is the most commonly used semiconductor material today, along with various compound semiconductors. The entire manufacturing process, from start to packaged chips...

    By Applied Rigaku Technologies, Inc. based in Austin, TEXAS (USA).

  • Premium

    Metals separation equipment for cleaning metal pollutants from WEEE

    REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from. Before the E-Waste enter into the shredding process, any contaminating material, like batteries, color cartridges, tonners, etc., must be removed manually from the incoming devices.

    By Regulator-Cetrisa based in Gava, SPAIN.

  • Premium

    Air pollution control for microelectronics

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Analytical spectrometric instruments for RoHS and WEEE

    A lot of European, US and international directives has been introduced for reducing the impact of harmful elements in consumer goods on human health and environmental. The best technique for screening of products for heavy metals and restricted substances is X-ray fluorescence analysis due to its excellent sensitivity (lead, mercury, chromium, antimony and other hazardous elements can be detected at ppm level), high performance and non-destructive testing.

    By Elvatech Ltd based in Kiev, UKRAINE.

  • Premium

    Water treatment solutions for the micro-electronics industry

    Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for semi-conduct...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Strategic market research solutions for cabling & broadband industry

    PennWell`s Cabling & Broadband Group is the trusted resource engineers and engineering managers turn to for up-to-date information focused on the structured cabling, optical communications and broadband industry. Featuring leading industry publications, websites, eNewsletters, events and more, industry leaders rely on Cabling Installation & Maintenance, Lightwave and Broadband Technology Report to provide key details and insights on these rapidly evolving industries.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Industrial air pollution control for the electronics and electrical industry

    The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs, DVTs, TFT-LCD and plasma displays. The electronics industry...

  • Premium

    Innovative gas measurement solutions for electronics industry

    Incredible advances in micro-miniaturization of electronic components, integrated circuits and microprocessors have benefited our world and will continue to produce new solutions and conveniences. These advances have resulted in extraordinary innovations, such as very powerful, compact computers, cell phones and various telecommunications devices. And these devices, though inconceivable just a few decades ago, are now common place worldwide.

    By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you