- Home
- Applications
Refine by
Environmental Product Applications For The Electronics And Computers Industry
88 applications found
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Anguil’s portfolio of innovative, competitive solutions for this rapidly evolving industry provide guaranteed VOC destruction, reduced equipment footprint, and maximized production uptime and ...
ByAnguil Environmental Systems, Inc. based in  Milwaukee, WISCONSIN (USA)
Premium
Metrology solutions for fiber optic interconnect components (“ferrules”) require high accuracy and throughput. One of the critical dimensions is the concentricity of the outer housing to the fiber optic center. This ensures proper interface to support high-speed communications ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
Slider inspection is a critical data storage manufacturing process that presents difficult challenges from a metrology perspective. Slider inspection requires the acquisition and measurement of relatively small feature sizes with tight tolerances while also demanding short cycle times to provide high throughput for large production ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
The accurate measurement of precision watch components places a number of special challenges on metrology systems used for inspection and process control. The small part sizes, variety of shapes, different gear geometries, and tight clearance specifications are all critical considerations when designing a metrology application for process control and inspection of watch ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
Production inspection of hard drive Head Gimbal Assemblies (HGAs) requires the accurate measurement of a number of critical factors to meet tight tolerances. These include pitch and roll angles, slider positioning, and slider orientation/alignment ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
The effective inspection of PCB connectors requires metrology solutions that can accurately measure a wide variety of connector dimensions while providing the fast cycle times and throughput required for high-volume near in-line production-oriented processes. Efficient and highly repeatable measurement capabilities are needed to quickly acquire data on lead (male) and slot (female) connector positions along with size, pitch, and coplanarity ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
High-technology industries use ultrapure water in their manufacturing. SnowPure’s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these ...
BySnowPure Water Technologies based in  San Clemente, CALIFORNIA (USA)
Premium
Inspection and process control for maintaining quality assurance over PCB artwork and bare-boards represent especially challenging requirements for metrology ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
Mis-registration of solder paste relative to printed circuit board pads is one of the leading causes of scrap and rework in surface mount technology (SMT) board assembly. In addition, height and volume measurements are crucial to new process development and to the optimization of existing ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at ...
ByMetrohm AG based in  Herisau, SWITZERLAND
Premium
Component placement verification in electronic assemblies presents metrology challenges that are almost as wide and varied as the range of electronic designs and the types of components used. Key process control parameters that must be measured include component positioning and rotation (X, Y, and theta) relative to pads, as well as checking for missing and/or damaged ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems . Kurita ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
ByGranutech-Saturn Systems based in  Grand Prairie, TEXAS (USA)
Premium
Flex circuit technologies pose a wide range of metrology challenges with a large number of different circuit geometries, pitch dimensions, and surface reflectivity factors. To meet these challenges, metrology systems for flex circuit inspection must incorporate advanced functionality such as versatile lighting, large-size stages, high-resolution positioning, and very accurate laser probe capabilities. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Premium
Micro-electromechanical systems, or MEMS, have become critical components in a variety of consumer and industrial products, including things inkjet printers, cellular phones and accelerometers for automobile airbags. MEMS devices are typically manufactured in high volumes, often using modified semiconductor processes, to exacting specifications. For MEMS manufacturers to meet high production standards, these devices need to be measured at various steps of the design, fabrication and production ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Premium
Driven by consumer demands for faster, lighter, and more capable mobile devices, consumer electronics manufacturers and component suppliers are faced with the challenge of keeping pace with constant evolution of technology, shorter product life cycles, and increased ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Premium
Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for ...
ByLenntech Water Treatment based in  Delfgauw, NETHERLANDS
Market analysts predict sustained growth in demand in the LED industry. After LED backlighting for the small LC displays of mobile phones and the LC displays of larger screens in the television market, the next potential growth market is the lighting industry: Sales of LEDs in this market in 2012 are almost USD 3.5 billion – thus nearly doubling since 2010. Analysts are expecting a growth of more than USD 7 billion in 2014 and believe that the total market for LEDs should peak at USD 17.7 billion.* A mass ...
ByDAS Environmental Expert GmbH based in  Dresden, GERMANY
Manufacturing TFT/LCD displays requires waste gas treatment as well. Processes that produce large scale Thinfilm Transistors (TFT) on glass substrates, for instance, use Chemical Vapour Deposition – CVD – to separate the thin films onto the material. The process requires cleaning the process chamber periodically and usually employs etching with NF3. Etching of the separated thin films typically utilises CF4, SF6 and chlorinated gases, which release large amounts of waste gas ...
ByDAS Environmental Expert GmbH based in  Dresden, GERMANY