Pulsar Measurement

46 products found

products

Pulsar - Model Zenith 140 - Intelligent Pumping Station Controller

Pulsar's Zenith is a high specification pumping station management system. Pulsar's proven non-contacting ultrasonic technology provides almost all known pumping routines in an easy to use package. By combining advanced ultrasonic level measurement with the control and monitoring of pumps and providing many other control functions, it is possible to eliminate a PLC by using Zenith in a smaller station.
Pulsar - Model Blackbox 136 - Non-contact Level Monitoring System

Non-contacting intelligent monitoring of level or overflow events. Blackbox 136 CSO is a sophisticated ultrasonic system specifically designed for use with batteries to provide non-contacting monitoring of level or overflow events, with exceptionally low power consumption to maximise battery life in remote locations. Blackbox 136 CSO also features on-board data logging.
FlowCERT - Open Channel Flow Meter

The FlowCERT open channel flow meter provides comprehensive flow monitoring with data logging and control functions for a complete range of flumes and weirs. It is compatible with a range of sensors in order to create a flow metering system to suit your application.
Pulsar - Model Quantum 2 - Superior Pumping Station Control

Pulsar's Quantum 2 pump station controller provides alarms, including a unique alarm warning of 'time to spill' in critical area, and resets tripped pumps automatically.
FlowCERT Lite - Mcerts Open Channel Flow Meter

FlowCERT Lite offers 2 mcert open channel flow meter systems both with Class 1 approval.
Flow Pulse - Non-invasive Clamp-on Flow Monitor for Pipes

Flow Pulse® is a unique, non-invasive flow monitor that clamps to the outside of a pipe and is simply secured with a screwdriver. Flow Pulse offers you exceptional repeatability at a fraction of the cost of an equivalent magflow meter. It can reliably monitor flow across a variety of pipe materials including rigid plastic, stainless steel, cast iron and even corrugated pipes.
Pulsar - Flow Monitor

Flow Monitor is a dedicated wall mounted device for Flow Pulse and can only be used with the Flow Pulse unit. Flow Monitor provides the power and interface for the Flow Pulse via a 4-core cable. It expands the capability of Flow Pulse, providing two relays that can be programmed as alarm or control for flow or velocity. Either relay can be programmed as a totaliser. Flow Monitor also provides a mA output and on-board logging, including a daily total....
Pulsar - Flow Pulse Handheld Controller

Flow Pulse Handheld Controller is an indispensable tool for portable flow monitoring, offering a toolset that allows programming, monitoring and data acquisition. The unit is available to connect to pre-installed Flow Pulse sensors or as a self-contained kit, with instant feedback via its clear colour screen. For true portability, the Handheld Controller will power a
Pulsar Guard - Model 2010 Series - Non-invasive Solids Flow Monitor

Powered with 23 to 30V DC the sensor provides a 0 to 10 volt output, this signal may be fed directly to a PLC or the optional control unit 2020 (see the datasheet opposite for more information on the control unit).
Pulsar - Model dB Transducer Series - Non-contacting Ultrasonic Transducers for Level Measurement

The Pulsar dB Transducer Series are ultrasonic transducers that can measure level in a wide range of liquids, powders and solids as well as open channel flow applications. The dB Transducers have a compact, low power transducer design that can be I.S. certified and uses standard interconnecting cables, yet produces extremely high acoustic power to give exceptional results in a wide variety of challenging situations. All transducers also have flammable...
Pulsar - Model dBi HART Series - Intelligent Transducers

The Pulsar dBi HART Transducer Series are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers which make use of HART communication protocols to make plant integration simple. Four range choices are available with either 3m, 6m, 10m or 15m range (10ft, 20ft, 33ft or 49ft). Can be specified in various formats to suit the application, for example flanged, PTFE coated for corrosive applications, fitted with foam...
Pulsar - Model Quantum 3 - Superior Pumping Station Controller

Quantum 3 is a fully-featured pump controller, using Pulsar's unique non-contacting ultrasonic technology including DATEM digital echo discrimination to provide sophisticated level management. Quantum 3 can be programmed to provide an alarm based on the time remaining before the station or well spills over. Vital for utilities who face the risk of prosecution if a station pollutes...
Pulsar - Model Ultra 5 - Non-contacting Ultrasonic Level Control and Flow Measurement

Ultra 5 provides flexible and reliable non-contacting ultrasonic level and volume measurement, advanced pump control and measures open channel flow to BS ISO 1438 and 4359. Ultra 5 is available as a wall, panel, fascia or 19' rack mount. An optional Radio Telemetry System may be fitted to the Ultra 5 controller which has a 3km (1.86miles) line-of-sight range. Up to 48 Nodes can be used using a 'Multihop' receiver installation. An optional Radio...
Pulsar - Model Sludge Finder 2 - Sludge Interface Monitor

Pulsar's Sludge Finder 2 is a versatile and reliable solution to measuring interface levels in primary or secondary settlement tanks and Sequencing Batch Reactor (SBR) systems. A self-cleaning transducer removes the need for regular inspection. Programming Sludge Finder 2 is simple, all you need to do is enter the operating parameters via a menu driven operator interface and then Sludge Finder 2 automatically tracks to the blanket interface using proven...
Pulsar - Model UltraTWIN - Twin-channel Ultrasonic Measurement

Flexibility is the UltraTWIN two channel ultrasonic system. Each channel is user-configurable to operate independently either as a full function open channel flow monitor, a pump control system or as a level and volume monitoring unit for liquids or solids, calculating volumes and providing alarms. UltraTWIN is compatiable with the full range of dB Transducers. UltraTWIN features six relays configurable to either channel.
Pulsar - Model IMP+ - Ultrasonic Level Measurement without Compromise

IMP+ can be used wherever you need reliable non-contacting ultrasonic level measurement and Pulsar's DATEM echo processing means IMP+ is perfect for solids or liquids and anywhere you need a display telling you the level, or an analogue output to interface with your site control system or drive a display. There is an IMP+ to suit your application, 3m, 6m and 10m range versions...
Pulsar - Model IMP Lite - Non-contacting Ultrasonic Level Measurement

IMP Lite can be used wherever you need reliable non-contacting ultrasonic level measurement and Pulsar's DATEM echo processing means IMP Lite is perfect for solids or liquids and anywhere you need a display telling you the level, or an analogue output to interface with your site control system or drive a display. The full IMP range is available with the wetted parts in PVDF build...
Pulsar - Model IMP+ I.S. - Combined Transducer and Controller

An Intrinsically Safe version of IMP+ with ATEX and IECEx configuration. IMP+ I.S. is a combined transducer and controller in one self-contained unit and is I.S. certified to ATEX EEx ia IIC T4 and IECEx. IMP+ I.S. benefits from a specially designed digital echo processing technique (DATEM) and is available in three versions, 3m, 6m or 10m range. The full IMP range is available with the wetted parts in PVDF build alternative for corrosive or...
Pulsar Isensys - Model SandAlert Portable - Controller - Portable Unit

The SandAlert Portable is a complete kit, including sensor, mounting strap and 50m extension lead, fitted in a rugged pelican case. A graphics display gives real-time sand data and trend information up to 90 days at 1 minute intervals. A PC interface allows data download and graphical analysis. SandAlert Portable is perfect for short-term well evaluation and to determine methods of control.
Pulsar Isensys - Model PulsarGuard 2001 - Acoustic Sensor

The unique PulsarGuard 2001 acoustic sensor is an intrinsically safe unit (ATEX EEx ia IIC T4) made from 316 stainless steel with environmental protection to IP68. SandAlert is perfect for a wide variety of different applications, and installation could not be simplier. The sand sensor is connected to the outside of the pipeline with a stainless steel band, detecting changes in the acoustic signature of flow within the pipe and converting that...
Pulsar MicroFlow - Non-contacting Microwave Liquid Velocity Sensor

MicroFlow delivers accurate, repeatable velocity measurement of liquid flow, either as a stand-alone device or as part of a complete measurement system. MicroFlow builds on Pulsar's award-winning pipe flow technology and world-leading open channel flow measurement systems.
Pulsar - Ultimate Controller

Ultimate Controller is a control system that combines ultrasonic level and flow measurement, RTU and advanced pump control in one economic, easily programmed, modular unit with dedicated web server remote control and touchscreen HMI. Integrating the world's leading non-contacting ultrasonic advanced controller with patented functions that reduce energy costs, aid Asset Management, reduce installation and maintenance costs and improve Compliance....
Greyline - Model TTFM 6.1 - Transit Time Flow Meter

Accurately measure the flow rate of relatively clean, non-aerated liquids. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, back-lit display, along with total volume, signal strength, relay status, and other diagnostic values. Use the built-in control relays as flow alarms or volume totalisation. Connect the isolated 4-20mA output to PLC's or controllers. A 128MB data logger is...
Greyline - Model DFM 6.1 - Doppler Flow Meter

Measure flow from outside a pipe. The Greyline DFM 6.1 is designed for 'difficult liquids' that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2' (12.5 mm) Inside Diameter or larger. The DFM 6.1 features enhanced performance in a wide range of applications. Improved industrial...
Greyline - Model PDFM 5.1 - Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5.1 works on any liquid containing bubbles or solids and is recommended for 'difficult liquids' like wastewater, slurries, sludge,...
Greyline - Model PTFM - Portable Transit Time Flow Meter

Recommended for fluids like water, glycol, oils and chemicals. Use it for calibrations, troubleshooting, flow surveys and as a temporary transmitter to replace inline flowmeters. The PTFM 1.0 ultrasonic transducers clamp-on the outside of pipes from 2' to 48' (50 to 1200 mm) diameter. The ultrasonic signal works through various pipe materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum...
Greyline - Model AVFM 6.1 - Area Velocity Flow Meter

Measure flow through partially filled pipes, channels, canals, and turnouts without a flume or weir. The AVFM 6.1 uses a submerged ultrasonic sensor to continuously measure both Velocity and Level in the channel. The sensor resists fouling, corrosion and abrasion. The flow meter can be configured with the standard submerged velocity-level sensor or with submerged velocity plus a separate non-contacting ultrasonic level sensor, for highly aerated fluids...
Greyline - Model Mantaray - Portable Area Velocity Flow Meter

The Mantaray Portable Area-Velocity Flow Meter measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. The unit displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems. Stingray Portable Level Velocity LoggerCalibration is simple: enter the pipe diameter or channel dimensions and the MantaRay automatically computes and displayes the flow rate and total on its...
Greyline - Model Stingray - Portable Level Velocity Logger

Stingray 2.0 is a compact, battery-powered logger with an ultrasonic sensor. It data logs level, velocity and water temperature readings for flow monitoring through open channels, partially full sewer pipes and surcharged pipes. Use it for flow surveys I&I studies, stormwater, irrigation water and sewage. Singray 2.0 uses a submerged ultrasonic sensor to continuously measure both velocity and level in the channel. The sensor is a completely sealed...
Pulsar - Model Ultra 4 - On-screen trend monitoring

Ultra 4 offers the sophistication and advanced features of the rest of the Ultra range in a compact, cost effective package and useful new features that make it even easier to set up and fine-tune. Offering as the name suggests, four alarm or control relays (3 X SPCO isolated and 1 x SPNO solid state) and a multi-functional display while loosing none of the easy set up and configuration that has made the Ultra range the natural choice for non-contacting...

Products by Greyline Instruments Inc.

Model ISM 5.0 - Insertion Magmeter

The ISM 5.0 accurately measures flow of conductive liquids in full pipes. It installs through a tap in the pipe wall and works on a wide range of pipe sizes. The dual-electrode sensor and continuous auto-zero function provides high accuracy – even at low flow rates. The ISM 5.0 sensor can be easily installed in new pipe systems or by hot tap in pressurized pipes with flowing liquids. There are no moving parts so obstruction to flow...
Flow Monitoring Instruments

Flow - Ultrasonic Flow Meters and Switches with Clamp-on Sensors to Measure Flow from Outside a Pipe.
Greyline - Model DFM 5.1 - Doppler Flow Meter

Measure flow from outside a pipe. The Greyline DFM 5.1 is designed for 'difficult liquids' that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2' (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.
Greyline - Model TTFM 1.0 - Transit Time Flowmeter for Clean Liquids

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output to PLC's or controllers.
Greyline - Model PDFM 5.1 - Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5 works on any liquid containing bubbles or solids and is recommended for 'difficult liquids' like wastewater, slurries, sludge,...
Greyline - Model PTFM 1.0 - Portable Transit Time Flow Meter

Recommended for fluids like water, glycol, oils and chemicals. Use it for calibrations, troubleshooting, flow surveys and as a temporary transmitter to replace inline flowmeters. The PTFM 1.0 ultrasonic transducers strap-on the outside of pipes from ½' to 48' (12 to 1200 mm) diameter. The ultrasonic signal works through common pipe materials including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass,...
Greyline - Model DFS 5.1 - Doppler Flow Switch

Clamp-on Flow Sensor Installs without cutting the pipe. Installs in Minutes No moving parts: Mount the DFS 5.1 ultrasonic sensor on the outside of metal or plastic pipes. The sensor continuously injects high frequency sound through the pipe wall and into the moving fluid where acoustic pulses are reflected back to the sensor from particles or bubbles in the fluid.
Greyline - Model Portaflow PT400 - Portable Transit Time Flow Meter

Recommended for clean fluids like water, glycol, oil and most chemicals. Sensors can be mounted without shutting down flow and there is no obstruction or pressure drop. The ultrasonic signal travels through all common metal and plastic pipe materials. Flow rate and totalizer are displayed continuously along with battery status, signal strength. Press one key to instantly change the units of flow measurement (e.g. from gallons to liters). Real time...
Greyline - Model SFM 6.1 - Ultrasonic Slurry Flow Meter

The Greyline SFM 6.1 was specifically developed for the slurry applications found in today’s coal fired power plants. Using a proprietary algorithm specifically designed for measuring slurry flow, the SFM 6.1 incorporates more than 25 years of Greyline ultrasonic flow measurement experience. The SFM 6.1 Slurry Flow Meter works best in applications that would defeat regular contacting flow meters. Because the Sensor is mounted on the outside of...
Open Channel Flow Monitoring Instruments

Monitor Wastewater Flow in Partially Full Pipes and Open Channels.
Greyline - Model AVFM 5.0 - Area-Velocity Flow Monitor

Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for stormwater, combined effluent, raw sewage, irrigation water and streams. Calibration is simple: enter the pipe diameter or channel shape and the AVFM 5.0 computes the flow volume and displays the flow rate. Measure forward and reverse flow and calibrate to channels of any shape.
Greyline - Model Stingray 2.0 - Portable Level-Velocity Logger

Stingray 2.0 is a compact, battery-powered logger with an ultrasonic sensor. It data logs level, velocity and water temperature readings for flow monitoring through open channels, partially full sewer pipes and surcharged pipes. Use it for flow surveys, I&I studies, stormwater, irrigation water and sewage.
MantaRay - Portable Area-Velocity Flow Meter

The MantaRay Portable Area-Velocity Flow Meter measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems. Calibration is simple: enter the pipe diameter or channel dimensions and the MantaRay...
Greyline - Model OCF 5.0 - Open Channel Flow Monitor

Continuously monitor, display, totalize and data log flow through any flume or weir. The OCF 5.0 includes a non-contacting ultrasonic sensor that mounts just 8' (203.2 mm) above the flowing water. It is accurate (±0.25%) and reliable. There is no obstruction to flow and no fouling. Use the built-in Keypad/menu system to select your flume or weir from the Menu and to choose measurement units (gallons, liters etc.).
Level Monitoring Instruments

Monitoring, Controlling, Transmitting Instruments with Non-Contacting Ultrasonic Sensors.
Greyline - Model SLT 5.0 - Level & Flow Monitor

Use this versatile instrument to continuously measure, display, transmit and control liquid level in storage tanks and pumping stations, or to monitor and totalize Open Channel Flow through any flume or weir. Mount the non-contacting ultrasonic sensor above the liquid being measured and install the watertight electronics enclosure nearby. Features a user-friendly keypad calibration system, backlit LCD display, an isolated 4-20mA output and 2...
Greyline - Model LIT25 - Level Indicating Transmitter

This new Greyline Transmitter displays, controls and transmits level. Mount the non-contacting ultrasonic sensor at the top of your tank and the compact, watertight electronics/display enclosure at a convenient location nearby. Operators can calibrate the LIT25 with its 2-button Keypad, without climbing the tank. Use the built-in relay for level control or alarm, the large 4-digit display for local indication, and the isolated 4-20mA output to to...
Greyline - Model PSL 5.0 - Hybrid Pump Station Level Controller

New Pump and Lift Station Level Controller: Ideal for sewage pump stations, lift stations, wet wells and tank level control with a non-contacting ultrasonic sensor mounted above the liquid. The new Greyline PSL 5.0 Level Controller has 6 independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm and echo-loss alarm.
Greyline - Model DLT 2.0 - Differential Level Transmitter

Reduce costs and simplify instrumentation at treatment plant headworks. The DLT 2.0 can measure both differential level plus flow through a flume. Install one Sensor on each side of a mechanical barscreen to continuously monitor, transmit and control level. Use the built-in control relays or 4-20mA outputs to automatically activate the barscreen rake at preset levels.

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.