Only show results in Connecticut? Ok

Environmental Management Applications

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Fluence MABR technology - low-energy nutrient removal for wastewater treatment

    Fluence MABR (membrane aerated biofilm reactor) technology address the critical challenges of wastewater treatment plants for: nutrient reduction, high effluent quality, compliance with regulations, minimized energy consumption, at a small footprint, whil

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Geosynthetic Lining for Canals, Stormwater Impoundments and Wetlands

    Composite laminated GCLs offer puncture and tensile strengths beyond conventional geomembranes. These GCLs offer the low permeability of a geomembrane combined with the high swelling and self healing characteristics of a traditional GCL. With their ease of installation, cost-effectiveness and resilience to physical and climate issues, GCLs are often specified in canals, stormwater impoundments or wetlands to control seepage and conserve valuable water where native soils are too permeable.

    By CETCO based in Wallasey, UNITED KINGDOM.

  • Premium

    Ceramic membranes and pressure vessels for environmental protection / waste water technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    ADVANCEES - ARSENIC REMOVAL - Custom skid-mounted water purification equipments for arsenic removal

    Arsenic is a naturally occurring element found in soils and groundwater. Arsenic concentrations vary in accordance with geographic location. When arsenic levels are found to be too high at a specific location, it may be necessary to treat water to remove it. Arsenic usually exists in two different forms, or valences, in a natural setting depending on the amount of oxygen available in groundwater. In more shallow aquifers with higher levels of oxygen, arsenic will usually exist as arsenate, As (V). In deeper,...

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    ADVANCEES - DESALINATION APPLICATION - Custom skid-mounted water purification equipments for desalination industry

    RO desalination technology was initially developed in the late 1950s, and has now evolved into the leading desalination technology globally. There are many different processes used in RO desalination, and a variety of factors come into play when selecting the appropriate solution for each situation – the quality of the source water, the desired quantity and quality of the water produced, pretreatment, energy requirements and disposal of concentrate. At Advanced Equipment and Services we focus on desalination...

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    ADVANCEES - ULTRAPURE WATER APPLICATION - Custom skid-mounted water purification equipments

    Ultrapure water (UPW) is water that has been purified to very strict specifications, containing by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,055 uS/cm at 25oC, also expressed as resistivity of 18,2 MOhm. Ultra-pure water is mainly used in the semiconductor and pharmaceutical industry often is produced through processes like membrane filtration or ion exchange to reach the ultimate conductivity of 10 uS/cm. The demineralized water is then processed...

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    Water treatment and mixing equipment for Lakes & Raw water reservoirs

    No other organization has actively solved more water quality problems than Medora Corporation, SolarBee® GridBee®. We like to talk about water quality improvement but we love to do something about it even more! Let`s get started...

    By Medora Corporation based in Dickinson, NORTH DAKOTA (USA).

  • Premium

    Electrochemical solutions and water technologies for marine industry

    In the marine market, ocean-going vessels and fresh water or inner coastal boats require water treatment technologies to meet drinking water, process water and wastewater requirements. Offshore oil and gas operations and ocean-going vessels generate sewage that can contain contaminants which have a detrimental effect on water quality and the overall marine environment. As a result, marine sewage treatment systems are required to lessen the environmental impact. The MEPC.227(64) effluent standards, adopted by the...

  • Premium

    Water treatment chemicals for the automotive industry

    Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Treatment of Process Water within Industry

    Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

  • Premium

    Water treatment and mixing equipment for Industrial water

    In wastewater treatment, the aeration system is often the largest energy consumer. It seems the age-old answer for every problem was to increase horsepower and add more aeration. When you analyze aeration, only 20% to 50% of the energy consumed is needed for production of dissolved oxygen (DO) for processing BOD and nitrifying bacteria. The remaining energy is used just for the mixing effect.

    By Medora Corporation based in Dickinson, NORTH DAKOTA (USA).

  • Premium

    Water treatment chemicals for the desalination of sea water industry

    Water is our most precious commodity. Drinking water is becoming more and more scarce as a result of rising demand and the drying up of resources. Particularly in arid regions such as the Middle East, Africa and increasingly in Southern Europe, the situation is deteriorating dramatically.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Hose and tube pumps for Water and wastewater industry

    Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic® or Kalkmilch), caustic soda, powder activated carbon and polymers. Sludge transfer. Filter press feeds.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Solutions for potable water treatment

    Outstanding water quality in line with global WHO standards. ProMinent turns water into hygienically perfect potable water – with powerful systems and components, which can be ready mounted for operation or individually configured.

    By ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Electrochemical solutions and water technologies for professional cleaning

    Reducing the risk of infection transmission. In a world where high-density living in urban areas is increasing, and healthcare and the spreading of pandemics are among top concerns, the role of the cleaning industry is of great importance, though often underestimated.

  • Premium

    ADVANCEES - IRON REMOVAL APPLICATION - Custom skid-mounted water purification equipments

    Processes for the removal of iron must be approached with an understanding of the water source, iron and manganese concentration, chemical form, and any additional contaminants or species that require removal. In addition, the end use of the water must be considered to determine what level of treatment is required and whether iron and manganese removal should be considered as a treatment step preceding other water purification methods. Contact us for more info: sales@advancees.com

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    ADVANCEES - FORMATION WATER Custom skid-mounted water purification equipments

    Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at sales@advancees.com

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you