- Home
- Equipment
Refine by
Ats Environmental Equipment & Supplies
58 equipment items found
Manufactured by:Advanced Telemetry Systems, Inc. (ATS) based inIsanti, MINNESOTA (USA)
Our easy-to-use model optimized for heavy field use. Ideal for smaller scale studies and basic ground tracking ...
Manufactured by:ATS Innova Clean Water Solutions based inMidvale, UTAH (USA)
Are there wastewater solutions that will reduce our operational costs? How much will reducing backwashes, algae, and sludge output improve our plant performance? ...
Manufactured by:Advanced Telemetry Systems, Inc. (ATS) based inIsanti, MINNESOTA (USA)
For larger scale studies where datalogging is not required. Large knobs for ease of use. 4 MHz range, 4000 channels scannable. 4 separate memory banks for different study areas. Rechargeable battery up to 8 hr. use. Carry case and battery charger included. Specify a 4 MHz range between 140 - 220 MHz when ...
Manufactured by:Amertech Tower Services, LLC. (ATS) based inTampa, FLORIDA (USA)
During the normal operation of a wet cooling tower, a small amount of water (in droplet form) is entrained in the exit air stream. This water is referred to as “drift”. The section of the cooling tower designed to minimize the amount of drift is most commonly known as “drift eliminators” or “mist eliminators”. In any case, drift must be minimized to ensure ...
Manufactured by:Advanced Telemetry Systems, Inc. (ATS) based inIsanti, MINNESOTA (USA)
Technical Specifications; Transmitter Type : Crystal controlled 2-stage. Calibration Tolerance : ± 2.5kHz. Frequency Stability : ± 2.5kHz, -20°C to 40°C. Pulse Rate and Width : Typical on time 20ms, off time 1.1-2.0sec (controlled by astable circuit). Pulse Rate Variation : 5%/volt, ± 20% for temperatures -20°C to +40°C. Battery : Silver Oxide. Activation : By ...
Manufactured by:Advanced Telemetry Systems, Inc. (ATS) based inIsanti, MINNESOTA (USA)
Slow pulse rate, low current models for min weight and max life compared to A1000 ...
Manufactured by:Amertech Tower Services, LLC. (ATS) based inTampa, FLORIDA (USA)
Field Erected Industrial Cooling Towers are constructed from various materials including preservative treated lumber and plywood, glass fiber reinforced pultrusions, steel and even reinforced concrete. Not matter which material you are dealing with, ATS can help fulfill your needs. ...
Manufactured by:ATS Group based in
The electro monorail system consists of an aluminum monorail layout on which autonomous hangers can run. The loop can be enhanced with switches, elevators or transfer systems to create a ...
Manufactured by:ATS Group based in
Crossing a conveyor is often essential in a workshop. However, it must possible to do so safely. We can accordingly integrate stairs and covers into our conveyors. Customizable, they are designed to allow your teams to cross or circulate with ...
Manufactured by:ATS Group based in
How to control that the pallet is in line with the sales order? By weighing the load, of course. Our weighing module will allow you to check the conformity of the order in your MES or ERP in relation to reality. This module is configurable, can communicate directly with your data system and display the value on a ...
Manufactured by:ATS - Air Treatment System Srl based inMilano, ITALY
The dry electrostatic precipitators are considered the standard with regard to the dust removal in many industries as, for example, the glass industry. This is to some peculiar characteristics of this equipment: which allows high operating temperatures, up to 470 °C, and at the same time are able to give good efficiency, about 90 - 99%, in order to allow the reach of emissions values as low ...
Manufactured by:ATS - Air Treatment System Srl based inMilano, ITALY
The scrubbers use the principle of absorption of the pollutants in the liquid phase. The gases pass, in countercurrent, through plates of different types or filling bodies fed by acidic or alkaline washing fluids. The scrubber is used as a finisher in order to reach very high level of neutralization or to remove micro-pollutants (Hg; heavymetals, dioxins and ...
Manufactured by:Advanced Technical Services GmbH (ATS) based inZug, SWITZERLAND
The model ATS/40994 – ATS 200S Science / Industry HPFP™ (High Performance Flame Photometer) is a multi-channel analyser that measures simultaneously and instantaneously up to 4 elements; Na, K, Li, and Ca are included as ...
Manufactured by:Advanced Technical Services GmbH (ATS) based inZug, SWITZERLAND
The model ATS/40998-7 – ATS 200S High Performance Flame Photometer System with Mg is a multi-channel analyser system that measures simultaneously and instantaneously up to 4 elements in a single aspiration. The hardware for Na, K, Mg, and Ca are included in the basic analyser with additional element channels ...
Manufactured by:Advanced Telemetry Systems, Inc. (ATS) based inIsanti, MINNESOTA (USA)
Extra elements for more field range and excellent directionality. Antenna, 1.52 m (5 ft) RG58 cable (ATS #11606), and antenna grip (ATS ...
Manufactured by:Amertech Tower Services, LLC. (ATS) based inTampa, FLORIDA (USA)
The heat transfer media (frequently known as “fill” or “packing” is designed to optimize the water surface area exposed to incoming air in a cooling tower. There are many different product configurations available in the marketplace today and AmertechTowerServices can provide them all, regardless of the manufacturer. Film fills, hybrid fills and splash fills are all ...
Manufactured by:ATS Innova Clean Water Solutions based inMidvale, UTAH (USA)
Pure Water: You want your customers to rate your drinking water as the best, purest, and safest in the world. So when you’ve got taste and odor complaints, problems with disinfection byproducts, bacteria, or algae or mussels infiltrating your system, you want the problems solved ...
Manufactured by:American Tool & Engineering, Inc. (ATE) based inGreene, IOWA (USA)
CNC- Rambaudi 5-AXIS Gantry (One of the largest 5axis in the area). Travels: X-106.3”, Y-86.6”, Z-39.4”. (C axis pitch +/-110 degrees ) – (A axis roll +/200 degrees). Renshaw Probing – 24,000 ...
Manufactured by:American Tool & Engineering, Inc. (ATE) based inGreene, IOWA (USA)
Travels- X-86”, Y -42”, Z- 37” . #50 Taper- 6,000 ...
Manufactured by:Air Technology Solutions (ATS) based inPrinceton, WYOMING (USA)
Vehicle exhaust residue not only adheres to walls and other surfaces, it also becomes embedded in clothing and furniture where it can be absorbed through the skin. Based on studies from the National Institute for Occupational Safety & Health (NIOSH), it is recommended that diesel exhaust be regarded as an occupational carcinogen (causing ...