- Home
- Equipment
Refine by
Adams Environmental Equipment & Supplies
126 equipment items found
Manufactured by:ADAMS Schweiz AG based inSerneus, SWITZERLAND
A bypass takes on an important function as a filling line or for pressure equalisation. Its design and concept represent challenging tasks for which we are very well equipped. We collaborate with customers to produce the right solution for decade-long safe operation. In most cases a bypass is made of stainless steel and other high quality materials and comprises multiple components, which will be ...
Manufactured by:R.P. Adams based inTonawanda, NEW YORK (USA)
Adams SAF aftercoolers incorporate highly efficient counter flow design, with air in the tubes and water in the shell. In this design, air can be made to more nearly approach cooling water temperature than in any other, thus assuring drier discharge air. SAF Aftercoolers are available in sizes to handle up to 50,000 cubic feet of air per minute at pressures to 1,000 ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
Application: AV-11A-A series vertical actuator applies to different kinds of valves for stainless steel pipeline system, such as butterfly valves, butterfly type ball valves, ball valves. Materials: Steel parts: AISI 304 Seal: VMQ/FPM/EPDM Standard Design: Vertical type with stainless steel 304 material Three types available: Normally closed (NC)-Air to open and spring ...
Manufactured by:Adam Carbons Limited based in, SRI LANKA
Adam Carbons - 8x30 - Activated ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
SS7WWW--- Short Buttweld Tees, Polish ID/OD Tube OD (Size) A Nominal Wall Part Number 1" 1.125 0.065 SS7WWW7-1-304 SS7WWW7-1-316 1.5" 1.656 0.065 SS7WWW7-1.5- 304 SS7WWW7-1.5-316 2" 2.062 0.065 SS7WWW7-2-304 SS7WWW7-2-316 2.5" 2.344 0.065 SS7WWW7-2.5- 304 SS7WWW7-2.5-316 3" 2.594 0.065 SS7WWW7-3-304 SS7WWW7-3-316 ...
Manufactured by:ADAMS Schweiz AG based inSerneus, SWITZERLAND
Upstream and downstream pipe spools are equipped with manhole entries as well as drainage, ventilation and connection flanges. Depending on the concept, intermediate tubes or dismounting- or adapter flanges may be necessary. They can be equipped with flange adapters and dismounting flanges according to customer ...
Distributed by:DR DAS based inGranville, OHIO (USA)
Resolution: 16-bit, Analog Input Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20Ma, Channel: 6 channel differential/ 2 channel single-ended or 8 channel differential (jumper select), Sampling Rate: 10Hz, With Modbus communication protocol ...
Distributed by:DR DAS based inGranville, OHIO (USA)
Channels: 4, Input Frequency: 0.3 - 1,000Hz max, (Frequency Mode), 5,000Hx max (Counter Mode), Maximum Count: 4,294,976,295 (32-bits), Minimum Input Current: 2 ...
Manufactured by:Adams Valves Inc. based inHouston, TEXAS (USA)
system the HTK guarantees ultra-tightness for cryogenic and high temperature services. Due to the triple offset sealing system the disc moves smoothly and free of friction and opens uniformly at all points along the specially designed body seat. When the disc is closed, the seal ring is compressed tightly into the seat without jamming or extruding. Temperature variations are reliably compensated ...
Manufactured by:Adams Valves Inc. based inHouston, TEXAS (USA)
The MAK, utilizing ADAMS exclusive patented inclined cone sealing system, has proven its longevity under extreme working conditions and thousands of cycles. It offers a very economical solution as a maintenance-free design for metal-to-metal zero leakage capability. Metal sealing, robust construction, and proven engineered material combinations make the MAK suitable for a wide range of ...
Manufactured by:Adams Valves Inc. based inHouston, TEXAS (USA)
Compact external dimensions, short face-to-face dimensions at all pressure ratings, and low weight make the OSK an economical valve for pipelines transporting liquids or gases. The streamlined, duo-eccentrically mounted disc, together with the conical sealing system, ensure a smooth-flow passage. The continuous seal provides tight shut-off and low friction and wear characteristics. The shaft runs ...
Manufactured by:Adams Valves Inc. based inHouston, TEXAS (USA)
These step seated or swingthrough throttle valves are ideal for optimum flow control of gaseous and liquid media. Streamlined disc profile gives low pressure loss and excellent control characteristic. Depending on control requirements, these valves are fitted with manual, electric, pneumatic or hydraulic actuators. Positioners, limit switches, and position transmitters are standard control ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
Application AV-7A stainless steel aseptic sampling valves are used in the food, dairy, brewery, winery and many other hygienic industries. Materials Materials: AISI-316L Size: DN8 Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector) Standard Design Aseptic sampling valve is made from three parts: valve body, valve head and one piece of diaphragm. A ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
Application AV-7PA series is a stainless steel aseptic sampling valve with pneumatic actuator; it is wildly used in the food, dairy, brewery, winery and many other hygienic industries. Materials Materials: AISI-316L Size: DN8 Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector) Standard Design Pneumatic aseptic sampling valve is made from four parts: ...
Manufactured by:R.P. Adams based inTonawanda, NEW YORK (USA)
R.P. Adams offers a complete line of manual strainers to complement the automatic self cleaning ...
Manufactured by:Adams Fertilizer Equipment based inDeWitt, ARKANSAS (USA)
Adams Screw Conveyors are available in several sizes in both diameter and overall length. There are some standard units, but most screw conveyors are custom built to fit your existing building or the new facility design. Size options are 9” to 16” diameter. Lengths vary per facility. Screw Conveyors are available in mild steel tube and flight or 304 stainless steel tube and flight. ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
AV-2MS series is a kind of manually operated butterfly-type ball valve. With good capacity in dealing with viscous medium or particulate, it is widely used in food, beverage, pharmaceutical and chemical industrial piping system, especially the brewing industry, to regulate and control the medium flow. Materials: AISI-304, AISI-304L, AISI-316, AISI-316L Size: 1/2''-4'' Gasket: EPDM (default) ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
Application AV-6 series regulating valve is widely used in sanitary fluid pipeline system to regulate pressure and flow. Materials Materials: AISI-316L Size: 1''-2'' Plug and seal: EPDM, or others upon request. Working Principle This type of regulating valve is operated by a hand wheel. While the hand wheel is adjusted clockwise, pressure and flow will decrease gradually until the valve ...
Manufactured by:Adams Fertilizer Equipment based inDeWitt, ARKANSAS (USA)
Adams Pit Conveyors (in-ground) are available in 3 styles, most common being the bushed steel (roller less) chain with drag flight paddle. These are designed the same way as our incline drag chain conveyor, but are built to be installed in a below grade concrete pit trough, such as under a railroad track or a drive over truck dump pit. They are made of 304 stainless steel truck sections; with ...
Manufactured by:ADAMS Schweiz AG based inSerneus, SWITZERLAND
ADAMS shut-off and butterfly valves are suitable for use as safety equipment in emergency shut-off situations and deliver absolute reliability in case of a penstock rupture as well as a turbine guard gainst over-rev. They deliver seal tightness, even in critical situations. The valves are welded constructions using high quality steel, or in some cases made of forged steel. Discs moulded to match ...