- Home
- Equipment
Refine by
Cti Environmental Equipment & Supplies
32 equipment items found
Manufactured by:CTI Systems S.à r.l. based inLentzweiler, LUXEMBOURG
CTI Systems S.à r.l. specializes in advanced storage solutions designed to maximize efficiency and optimize the flow of essential materials in industrial environments. The company offers bespoke storage systems, including innovative lift and run dynamic storage technology specifically developed for long profiles. This technology is especially suitable for manufacturing and construction ...
Manufactured by:Chicago Tube and Iron Company based inRomeoville, ILLINOIS (USA)
This specification covers electric resistance welded, flash controlled,normalized, single wall, low carbon steel pressure tubing. It is intended for use in pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, beading, forming and brazing. Material produced to this specification is not intended for single flare applications due to the ...
Manufactured by:Cavitation Technologies, Inc. based inChatsworth, CALIFORNIA (USA)
Based on the results of thorough testing, the Company’s proprietary technology of petroleum upgrading was proven to be capable of breaking down asphaltene agglomerates, improving both the viscosity and API gravity for a prolonged period of time, reducing pumping and atomization costs, facilitating hydrocarbon cracking and increasing the refining ...
Manufactured by:CTi Sensors based inSolon, OHIO (USA)
The CS-AH100/200 Attitude and Heading Reference System (AHRS) is a 9 DOF system measuring with 3-dimensional orientation (roll, pitch, and yaw angles). The combination of accelerometers, gyroscope, and magnetometers are used internally by the sensor’s fusion algorithm to achieve this. This sensor has applications in attitude control and robotics as well as in vehicle localization and as ...
Manufactured by:CTI Systems S.à r.l. based inLentzweiler, LUXEMBOURG
CTI Systems' extensive range of floor-mounted conveyor systems allow even the bulkiest loads to be transported throughout a production site quickly and ...
Manufactured by:Céramiques Techniques Industrielles (CTI) based inSalindres, FRANCE
The product of six years research in collaboration with IFP (French Petroleum Institute), this patented filter marketed by CTI since 2006 is based on very different manufacturing technology and processes from those used in the filters previously available on the ...
Manufactured by:Cavitation Technologies, Inc. based inChatsworth, CALIFORNIA (USA)
The laboratory stand is designed for hydrodynamic and cavitation treatment of homogeneous and heterogeneous liquids in order to intensify the processes of mass transfer, emulsification and dispersion, as well as to change the physical characteristics of the treated liquid. Hydrodynamic and cavitation treatment of the liquid is carried out in a flowing hydrodynamic cavitator, model number - ...
Manufactured by:Céramiques Techniques Industrielles (CTI) based inSalindres, FRANCE
In response to the specific high temperature industrial gas dedusting requirements (to recover energy from exhaust gases or allow downstream processing - DeNOx, absorption... - fumes requiring high temperature), CTI has developed a filter module based on ceramic membranes, which are especially suited to this application. Indeed, CTI's ceramic filters withstand up to 750°C and also provide a ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
Microincinerators are used to sterilize metal inoculation loops and needles. Utilizing infrared heating inside the ceramic device without an open flame it protects the user from dangerous gases, flames, and splatters. At 900°C the loop or needle will reach optimum sterilization within 3-7 ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
The Tube Revolver can be used in a variety of laboratory fields such as Molecular Biology, Biochemistry, Clinical, and Histochemistry. The rotisseries are interchangeable so that the unit works with a variety of tube sizes. The four rotisserie paddles can be mixed for a combination of different tubes. Each paddle direction can be independently adjusted from 0-90 degrees. In addition to the speed ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
Crystal Technology and Industries’ Mini Vortex Mixer is the ideal Vortex Mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures proper mixing and accurate ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
This Multi-Position Magnetic Stirrer base is fully submersible, ideal for Water Bath or C02 Incubator. A remote Panel allows for full control while in ...
Manufactured by:Calibration Technologies, Inc. based inColumbia, MISSOURI (USA)
Gas Detector for Ammonia and other toxic gases; explosion proof enclosure designed for classified areas. Explosion-proof enclosure for classified areas. Target Gas selective sensor technology. Circuit board sealed in potting material to protect sensitive sensor components and copper tracing from corrosion. Designed for installation in compressor rooms and other classified areas. Transmitters are ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
UV lamps can be used for observing and imaging DNA and RNA gels. They are essential devices for medical hygiene, bio-engineering, molecular biology, genetic studies and biological production, anti-counterfeit inspection, pharmaceutical production, criminal and forensic examination, and verification. UV lamps can also be used to examine plates for thin-layer ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
Features: Motorless drive stirring mechanism provides quiet and maintenance-free operation. Constructed of corrosion-resistant materials for easy clean-up and long operational life. Ergonomically designed for simple operation and minimal benchtop space usage. Speeds from 0~2000 RPM with capacities and power for any benchtop use. ABS Platforms provide extreme durability and chemical resistance. ...
Manufactured by:Crystal Technology & Industries, Inc. (CTI) based inAddison, TEXAS (USA)
Digital Hotplate Stirrers are ideal for general lab applications such as mixing reagents and stirring bacteriological cultures. Constructed of anodized high-grade aluminum alloy (MS-01HA) or white glass-ceramic (MS-01H7A And MS-01H10A) ensure these units are durable and highly resistant to corrosion. The aluminum body and brushless motor provide maintenance-free ...
Manufactured by:Calibration Technologies, Inc. based inColumbia, MISSOURI (USA)
Industrial Gas Detector for Ammonia (NH3); designed for harsh industrial environments in the food industry including: food processing, blast freezers, engine rooms, fishing vessels, outdoor locations, and more. ...
Manufactured by:Cavitation Technologies, Inc. based inChatsworth, CALIFORNIA (USA)
LPN multistage cavitator designed to achieve improved performance over conventional technologies covering a wide range of applications while processing large volumes of fluids. The improved performance of a low pressure multistage cavitation system is going to be achieved through the introduction of an innovative conceptual designs and usage of advanced computational techniques. LPN systems will ...
Manufactured by:CTI Systems S.à r.l. based inLentzweiler, LUXEMBOURG
While often a feature of new clad-rack building projects, high-bay storage systems can also be designed to operate within existing facilities. Solutions can be developed that are compatible with the physical dimensions of the customer’s site as well as the characteristics of the products stored within it. The aisles of high-bay storage systems are served by stacker cranes that access each ...
Manufactured by:CTi Sensors based inSolon, OHIO (USA)
The CS-IM100/200 Inertial Measurement Unit is a 9 degree-of-freedom (DOF) inertial measurement device. The 3-axis accelerometer can be used to sense gravitational acceleration as well as motion. Rotation-rate can be sensed by the 3-axis gyroscope and the magnetometer provides 3-axis measurements of the magnetic field. This calibrated MEMS sensing combination provides a wealth of dynamic ...