- Home
- Equipment
Refine by
Solinst Environmental Equipment & Supplies
55 equipment items found
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Solinst Model 425 Discrete Interval Sampler (DIS) is a stainless steel sampler, with LDPE tubing mounted on the convenient Solinst reel. The reel has a pressure attachment for a high pressure hand pump, and a pressure/vent switch which is used to apply and release the pressure on the sampler. A sample release device is included with each standard Discrete Interval Sampler. Solinst also offers ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 429 Stainless Steel Point-Source Bailer has an easy sample release device and dual check valves top and bottom. The check valves prevent water at other depths from mixing with the sample during retrieval. Point-Source Bailers are available in 0.5", 1", 1.5" and 2" diameters (12.7, 25.4, 38.1, 50.8 mm), and lengths from 2 ft to 4 ft (610 mm and 1220 mm). The 103 Tag Line with marked cable can ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 800 Low Pressure Packers are simple, inexpensive and inflate with a hand pump. They come as single or straddle packers and can be lowered into the well from a rope tether or a rigid PVC pipe. The 103 Tag Line can be used as a marked safety line. Available in sizes to fit wells and boreholes from 1.9" – 5" (48.3 – 127 mm) to a maximum pressure of 50 psi (345 kPa) for the smaller ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 12 Volt Compressor is lightweight and compact, ideal for field use. It uses any 12 Volt DC power source, such as a car or truck vehicle battery. The compressor operates at 125 psi with a 2 US gallon (7.6 liter) air tank rated to 150 ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Solinst 12V Submersible Pump is capable of pumping groundwater from 36.5 m (120 ft.) below ground surface, with flow rates up to 13.5 L/min (3.6 US gpm) in shallow conditions. The continuous flow rate is very simple to adjust using the 12V Pump Controller's single dial. The 12V Submersible Pump's sleek, short (nominal 6") design means it fits easily down wells that may not be straight, ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
CMT Multilevel System consists of 7 discrete zones. Zones are packed off using bentonite to eliminate vertical contamination between sand packed sampling ports. Depth discrete data obtained from CMT increases risk assessment accuracy, improves decision making, optimizes performance of site remediation, and provides vertical hydraulic head data for model calibration. Narrow 3-channel option as ...
Manufactured by:Logotronic GmbH based inVienna, AUSTRIA
In addition to the basic functions of the Model 101, it is possible to regulate the sensitivity of the measuring probe. This makes it possible to eliminate sources of interference and achieve reliable, reproducible measurement results. Measuring tapes are available up to a length of 600m and also as a PVDF version. Two different probes (P2 and P7) also meet higher demands on the measuring ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 122M Mini Interface Meter is a more portable version. It is small enough to fit in a backpack, yet rugged and reliable. It comes with laser marked cable in 25 m or 80 ft lengths. It shares the same probe, and certifications as the 122 Interface ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 105 Well Casing & Depth Indicator is used to detect metal well casing and measure total well depth. It offers both of these functions using one probe. The probe has a strong internal magnetic assembly to detect well casing. When the probe is adjacent to magnetic metal (e.g. steel) a circuit is completed activating the buzzer and light. When the probe is no longer next to the casing, the ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 102M Mini Water Level Indicator is a very compact meter in 25 m and 80 ft lengths. The reel is light-weight and fits easily into a backpack or a mini carrying case. The cable is marked each millimeter or every 1/100 ft, with a choice of a P4 or P10 ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Solinst Model 101 Lateral Winder is lightweight and easy to connect to any size Solinst reel frame. It is designed to easily wind tape smoothly and evenly, avoiding hang-ups during deployment and retrieval. Never deal with tangled tapes ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 615 Drive-Point Piezometers are cost-effective for initial site investigations, plume delineations, and as low-cost mini well points. They are excellent for groundwater or soil gas sampling, underground storage tank monitoring, and as sparge points. The stainless steel piezometer point has a 50 mesh screen and a 3/4" NPT riser pipe. An inner sampling tube can be used if higher quality samples ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Solinst Levelogger App and Levelogger 5 App Interface can be used to program, view, or download data from a Bluetooth® connected Solinst datalogger on your iOS or Android™ smart device. The Solinst Levelogger App is available free on the App StoreSM and on Google Play™. The App allows you to e-mail and share data logs right from your smart device. To communicate with the ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
Eliminate going to the field to download your Levelogger data. Quickly and easily add cellular telemetry to your Levelogger monitoring wells. The LevelSender is designed to connect to Direct Read Cables and Leveloggers, upgrading your current installation by adding cellular telemetry at an affordable price. The LevelSender is compact in design, and is simple to setup and maintain. Leverage your ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Levelogger 5 LTC (Level, Temperature, Conductivity) combines a datalogger that stores 100,000 sets of readings, 8-year battery, pressure transducer, and temperature and conductivity sensors within a sealed 22 mm x 208 mm (7/8" x 8.2") stainless steel body with a PFAS-free, corrosion-resistant PTFE coating (inside and out) baked on using polymerization ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
TThe DataGrabber 5 is a simple portable device that copies data from Solinst dataloggers in the field, to a USB flash drive key with an optional USB-C connection. The DataGrabber 5 connects to the top of a Direct Read Cable, or to the Levelogger using an Adaptor. Also connects with LevelVent 5 and AquaVent 5 vented water level dataloggers. Each DataGrabber comes with a Solinst 2GB USB flash drive ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Solinst Readout Unit (SRU) is a field-ready device designed to take and display instant water level readings from a deployed Solinst datalogger, as well as allowing simple download of stored ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Model 615 ML Multilevel Drive-Point Piezometer system can provide several monitoring zones in one drive location. The 615 ML Ports have a dual barbed stem that allows the connection of either 3/8" OD or 1/4" OD tubing to create up to 3 or 6 monitoring zones, respectively. The 615 ML Multilevel System is installed using extensions and a Manual Slide Hammer, similar to standard 615 ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
Discover Anywhere Monitoring. SolSat 5 is an advanced telemetry system that leverages Iridium satellite technology to provide global connectivity for your remote water monitoring projects. Using TextAnywhere two-way global satellite messaging, data is sent from Solinst dataloggers in the field to a secure web portal for complete control of your data. Select a low-cost data plan of your choice ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 703 Waterloo Emitter™ is a simple, low cost device for the controlled release of oxygen or other amendments to encourage and sustain the growth of microorganisms, required for in-situ bioremediation of contaminated groundwater. Ideal for the diffusion of oxygen to enhance the bioremediation of BTEX and MTBE. Emitters provide immediate bioavailability of molecular oxygen for aerobic ...