- Home
- Equipment
Refine by
Trelleborg Environmental Equipment & Supplies
32 equipment items found
Manufactured by:Trelleborg Sealing Solutions based inSchaumburg, ILLINOIS (USA)
As the demand for air travel continues to rise, so does Trelleborg’s quest to identify solutions that make aircraft and terminal equipment safer, lighter and more energy ...
Manufactured by:Minnesota Rubber & Plastics Corporation, Part of Trelleborg based inMinneapolis, MINNESOTA (USA)
This comprehensive design and materials guide is intended to support the new product development needs of engineers, when challenged with a demanding plastic component ...
Manufactured by:Trelleborg Sealing Solutions based inSchaumburg, ILLINOIS (USA)
The Complete Magnet Piston fulfills a large number of technical requirements within the pneumatics industry with its doubleacting operation, dynamic sealing capability, guidance feature and mechanical end cushioning. An NBR O-Ring acts as a static seal and seals the rod while an integrated magnet detects position. The dimension, magnet flux and return spring groove can all be customized to ...
Manufactured by:Trelleborg Forsheda Pipe Seals based inLelystad, NETHERLANDS
The Forsheda 559 Rieber Metric Pressure integrated system uses the mandrel together with the seal as a tool to form the pipe socket during the manufacturing process. Forsheda 559 Rieber Metric Pressure is a seal composite consisting of: A flexible rubber element to seal effectively against spigot and socket. A treated metal insert which holds the seal firmly in place. The seal is placed onto the ...
Manufactured by:Trelleborg Forsheda Pipe Seals based inLelystad, NETHERLANDS
Trelleborg 910 Triple Lip Connector is a rubber seal for flexible connection of pipes to manholes and laterals to pipelines. It can be used with both prefabricated and core drilled holes. ...
Manufactured by:Trelleborg Forsheda Pipe Seals based inLelystad, NETHERLANDS
Trelleborg 140 Lamell is a pre-lubricated sliding seal that is stretched onto the spigot of the pipe or manhole. Additional lubricat is not required for joint assembly. The joint design is standard in many countries. The seal is easy and clean to handle as the lubricant is enclosed in the sliding mantle. This allows installation with very little force as there is no friction between the rubber ...
Manufactured by:Trelleborg Forsheda Pipe Seals based inLelystad, NETHERLANDS
The Forsheda 582 Din-Lock™ seal is a combined lip and compression sealing system that is positioned in the socket by the pipe manufacturer after the bell has been formed. The unique design has a flexible thermoplastic elastomer sealing element bonded to a polypropylene retaining ring which holds the seal firmly in the correct position during pipe transportation and joint assembly. The seal ...
Manufactured by:Trelleborg Forsheda Pipe Seals based inLelystad, NETHERLANDS
Trelleborg 589 Din-Lock seal is a combined lip and compression sealing system that is positioned in the socket by the pipe manufacturer after the bell has been formed. The unique design has a flexible thermoplastic elastomer sealing element bonded to a polypropylene retaining ring which holds the seal firmly in the correct position during pipe transportation and joint assembly. The seal is ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inStuttgart, GERMANY
The Balance I with inner sleeve is a stainless steel expansion joint with carbon steel weld ends and a stainless steel inner sleeve. It is used to accommodate axial movements and relatively small lateral misalignments in piping systems with large diameters. Due to its double-ply bellows, this compensator is more flexible in comparison to similar single-ply compensators. The maximum operating ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inStuttgart, GERMANY
The Balance II is a stainless steel expansion joint with carbon steel weld ends. It is used to accommodate axial movements and relatively large lateral misalignments in piping systems. Due to its double-ply bellows, this compensator is more flexible in comparison to similar single-ply compensators. The maximum operating temperature of the Balance II is +550 °C, the maximum working pressure ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inStuttgart, GERMANY
The Balance I with inner sleeve is a stainless steel expansion joint with carbon steel weld ends and a stainless steel inner sleeve. It is used to accommodate axial movements and relatively small lateral misalignment in piping systems with large diameters. Due to its double-ply bellows, this compensator is more flexible in comparison to similar single-ply compensators. The maximum operating ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inStuttgart, GERMANY
Cannot be displaced during transportation & installation. Greater joint reliability due to joint tolerance reduction. Traditional Rieber style seal for metric pressure ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inStuttgart, GERMANY
Trelleborg 104 Delta Seal is a sliding seal that is stretched onto the spigot end of the pipe or manhole. Lubricant is applied to the socket prior to jointing. The joint design is standard in many countries. The special design of the joint and seal make the system easy to centre during jointing. This design permits installation with very low ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inStuttgart, GERMANY
Recommendsble for short rehabilitation lengths up to ON ...
Manufactured by:Trelleborg Forsheda Pipe Seals based inLelystad, NETHERLANDS
Trelleborg 160 Integrated Manhole Seal is a one-piece integrated seal that is cast into the socket during manhole manufacture. It is specifically designed for use with the spigot design according to DIN V 4034-1. ...
Manufactured by:Trelleborg Pipe Seals Milford, Inc. based inTrelleborg, NEW HAMPSHIRE (USA)
Non-integrated seal for plastic pressure pipes and wastewater conduit in ground. Seal design & function: The Trelleborg 575 Anger seal is a combined lip and compression seal. The seal is positioned in the socket by the pipe manufacturer. The ”main lip” comprises a combined lip and compression section. The ”front and rear lip” locates the seal in the socket groove and ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inDuisburg, GERMANY
Integrated seal for concrete manhole systems using DIN V 4034-1 spigot design. Easy to centre during jointing. Compatible with standard spigot with ...
Manufactured by:Trelleborg Pipe Seals Duisburg GmbH based inDuisburg, GERMANY
Locked-in seal for plastic pressure pipes, wastewater, conduit and cast-iron fittings. Trelleborg Anger-Lock is a combined lip and compression seal. Installed inside the socket after it has been formed, the retaining element effectively locks the seal into the groove. Making the seal an integral part of the pipe brings many advantages: rings can no longer get lost during stocking and ...
Manufactured by:Sukitustukku Oy based inSipoo, FINLAND
UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxy resin) Class 9, III UN. 2735, AMINES, LIQUID, CORROSIVE, N.O.S. (Octahydro-4,7-methano-1H-indendimethylamin) Class 8, ...
Manufactured by:Trelleborg Sealing Solutions based inSchaumburg, ILLINOIS (USA)
We design and manufacture composite parts to fit your needs. We offer a wide variety of shapes and sizes with the ability to design complex geometries up to 40 feet long with ODs ranging from .02 inches to over 60 ...