- Home
- Equipment
Refine by
Vibro Environmental Equipment & Supplies
36 equipment items found
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-mini can be combined with a suitable reinforced and modulated galvanized metal suspension hanger, offering vibration isolation on sound insulation gypsumboard ceilings. The hole of the rubberof the Vibro-mini, is Φ8 mm for the pass-through bolt. A long threaded rod could be used in order to adjust the height of the false ceiling. The suspension hanger has grabbling nebs for quick and ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-EP Metal consists of an elastic element (dimensions 12.5x12.5 cm) and a specially formed galvanised metal cover. The intercession of the steel covers between the base of the machine and the elastic, this ensures that the equable distribution of the load to the entire surface of the elastic element. At the same time the cover protects the rubber from the solar radiation. At the centre of the ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
The frame of Vibro CH-R is galvanized metal. The precisely designed incisions provide easy bending of its frame, at certain shapes, that can be achieved by the force of a single hand. Therefore, Vibro CH-R can be easily transformed into 4 different shapes, in order to help the installer to use it in the most favorable ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
The Vibro-mini, can be fixed with an anchor on the floor, be suspended on the ceiling through anchors and also be placed on a metal base with a passing through screw of Μ8 mm. Due to its pioneer design, the Vibro-mini gives big deflection when loaded. As it’s known - Larger Deflection Means Better Antivibration Results. The anchor rod of the suspension must be perpendicular. The passing ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Consists of a galvanized sheet metal frame, properly formed with lateral strength. The rubber pad at the bottom of the spring acts as a sound break and increases isolation efficiency in high frequencies. The steel spring faces the low frequency excitation. The Vibro–SH can be re - loaded by tightening the nut and the anchor of the suspension must be ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
The Dynamic compaction technique achieved deep ground densification using the dynamic effects of high energy impacts resulting from the drop of large pounders. The technique was invented and developed by Mr. Louis MENARD. Since the late 60’s, the MENARD Company has applied this technique to thousands of sites for different types of structures and soil conditions (port and airport platforms, ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
Stone columns are formed by inserting a vibratory probe to incorporate granular material into the ground and create vertical inclusions with high stiffness, shear strength and draining ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
The construction of a new embankment or structure induces additional stresses on the ground that can create unacceptable long term residual settlements during the life of the structure or highway. A preloading program can be designed to induce these settlements in an accelerated time frame and therefore minimize the long term residual settlement to within acceptable limits for the ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Suitable for raised concrete floating floors. Regulation of height. Avoid remaining plywood forms. Monitoring and easy replacement of spring. Combination of spring and rubber, for better acoustical results. Creates an air-gap, beneficial for the sound insulation and the vibration ...
Manufactured by:William Boulton Ltd. based inStoke-on-Trent, UNITED KINGDOM
Vibratory separators for screening, sieving, sifting, grading and classification duties in all industries including abrasives, agrochemical, brewing, ceramics, chemical, distilling, food, fuel, glass, latex, metal powder, mineral, paint, paper, petroleum, recycling, rubber and waste recovery ...
Manufactured by:William Boulton Ltd. based inStoke-on-Trent, UNITED KINGDOM
It is well-known that the commercial value and performance of many materials is vastly increased by Ultra-Fine Grinding and the Vibro-Energy Grinding Mill is a proven machine for obtaining such materials with high efficiency and at low cost. Grinding is carried out in the Mill by the use of high density Ceramic Media. The requirements for ultrafine grinding are that relatively small forces need ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
Addressing noise and vibration issues caused by rooftop units (RTUs) can be challenging. To target all potential noise problems, the complexity of the system must be ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
Circular Dissipative silencers are labeled “CD” and are typically used with circular duct systems or inline axial ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
When project space limitations cannot accommodate straight silencers, Rectangular Elbow Dissipative (“RED”) silencers can be used to both reduce noise and control pressure ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
To save space and reduce project cost, any silencer can be designed to have different connections and casing geometry to match project ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
Axial Fan Silencers by Vibro-Acoustics have a conical design which provides reduced horsepower requirements and energy savings when aerodynamically matched to the fan inlet or ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-TiLe are versatile vibration isolation pads made of special compound rubber. They reduce noise, high frequency vibration and impact from machines. They are shaped in a versatile modular waffle design. They are molded in a sheet that consists of 4X4 vibration isolation pad basic modules with dimensions of 50X50mm and they can be cut in pieces according to the specific needs of each ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
The silicone anti-vibration supports Vibro.SiL-mini can offer vibration protection for compressors, pumps, fans, muffler hanger, on-board computers and other sensitive electronic equipment, in avionic, military and medical applications where a wide temperature range (-40 to +200°C) ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-PI mini consists of a metal frame of galvanized sheet appropriately formed with a special antivibration rubber support (Vibro-mini) and it is placed on the upper part. An M6 screw which can be anchored on the ceiling is placed through the rubber support. The rubber antivibration support Vibro-mini, is a result of extensive technological research, made of high quality rubber compound and ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-CH mini consists of a metal frame made of galvanized steel with notches in appropriate places and the antivibration mount Vibro mini. The suspension is able to be transformed in all 4 forms shown above with the strength of just one ...