- Home
- Equipment
Refine by
Binder Environmental Equipment & Supplies
35 equipment items found
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
An optimum cullet grain size of 10 to 50 mm is crucial for sensor-supported separation since a higher content of fines (0-10 mm) would have an unfavourable effect on sorting performance. The double roll crusher from Binder+Co provides for an optimum comminution curve of cullet as well as low energy requirement, long service life and low wear. Furthermore, the double roll crusher breaks glass ...
Manufactured by:Binder Energietechnik GmbH based inBärnbach, AUSTRIA
BINDER offers Transport Augers in different variants. The transport auger is the part of the boiler that takes the fuel of a discharge unit and transports it towards the boiler. It consists of a screw conveyor, which is carried in a steel duct. At the end of the auger, the ejection opening, which ensures the transition to other transport units is located at the bottom. A clog detection sensor is ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the KT series are state-of-the-art in application and protect the ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -10 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
Screw classifiers or dewatering screws are used for simultaneous cleaning and dewatering of sand from upstream, brewed screening machines or for dewatering of cycloned sands. The deslurried coarse sand product is conveyed by the screw against gravity and discharged well dewatered at the upper end of the trough. The fine slurry overflowing at the lower end of the trough contains the majority of ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The VACOMASS square diaphragm control valve is a technically optimized sliding gate control valve with a falling flow axis and gas-tight shut-off using a square shaped control aperture. It is used for precise and low-loss control of airflow and distribution in the aeration tanks of a wastewater treatment plant (design according to DIN EN ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The VACOMASS elliptic diaphragm control valve is a technically optimized control valve, especially developed for aeration air, closing gas-tight with a lenticular control aperture. Low pressure drop in the whole control range and high flow rate capacity for flexing and cleaning the diffuser with very low pressure drop are two of the main features (design according to DIN EN ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The COMBIMASS syngas measuring system is a device combination in intermediate flange design and consists of two sensors: a heat conductivity sensor in the steady flow zone and a thermal sensor in the gas flow. The heat conductivity sensor determines the changing H2 concentration in the gas approximately and corrects the measurement signal of the thermal sensor ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
Uniform drying conditions thanks to APT.line™ technology. Identical test conditions throughout the chamber interior independent of sample size and quantity. Outstanding thermal insulation saves operation costs. Advanced programming ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The COMBIMASS GA-s hybrid premium air monitoring analyzer station consists of a ventilated cabinet for the cyclic analysis of the air of 1 up to 4 fermenters for indoor installation with an integrated display and flexible measuring program. The gas modules have an integrated maintenance diagnosis whereby the wear is signaled by the traffic light colours. Transmission of data and alarms is ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
BIVITEC e+ big on effect, small on consumption. The latest flip-flow screen scores with low dynamic loads, compact design and efficient screening performance even with feed material that is difficult to ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
The BIVITEC flip flow screen comes into its own when conventional screening technology starts to be inefficient and uneconomical. Particularly challenging tasks are solved in a simple and efficient way. The BIVITEC flip flow screen ensures selective screening of bulk materials which are difficult to ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
The Binder+Co circular vibrating screens are typical vibrating screens. They work according to the ejection principle and carry out a circular movement. Speed and amplitude of the vibration can be adjusted according to screening task. The adjustable unbalanced masses ensure ...
Manufactured by:Binder Energietechnik GmbH based inBärnbach, AUSTRIA
Auger with adjustable pressure relief cover for transport of pellets out of a rectangular room with or without slanted floor. Depending on the fuel store size with or without universal ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
An optimum grain size of 10 to 50 mm is crucial for sensor-based sorting of cullet since a higher content of fines (0-10 mm) would have an unfavourable effect on sorting performance. In the form of the double roll crusher, Binder+Co has created the ideal prerequisite for the subsequent sorting of waste ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
Maximum usable space with minimal footprint and excellent ease of use. Minimum risk of contamination thanks to uncompromising hot-air sterilization. Fanless, easy-to-clean hygienic interior. Stable pH values thanks to drift-free CO₂ IR sensor technology. Low evaporation of the medium due to high levels of humidity and quick recovery ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
When blanketing in sterile areas further design features are required in addition to the high, electropolished surface quality and the materials required especially for the food and pharmaceutical industries. INSTRUM stainless steel pressure regulators offer GMP-compliant design to minimize or eliminate germinated ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
CRITERION is the system for separating different types of plastic. Also in developing CRITERION, Binder+Co approached the challenge from the view point of the user. The needs of our customers for a compact multi-stream solution led to the conception of ...
Manufactured by:Binder Energietechnik GmbH based inBärnbach, AUSTRIA
Usually the Direct Hydraulic Infeed is used to transport coarse material into the combustion chamber. The QFE is mostly used in combination with an walking floor. A level sensor constantly monitors the level of material in the QFE. A hydraulically driven pusher with multiple carriers transports the material through a wall opening in the combustion unit. The required anti burnback protection is ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
The use of waste glass as a secondary raw material requires that cullet is sorted according to optimum purity. Metallic impurities in cullet from waste-glass create unwanted discolourations in the production of new glass and can even damage the glass trough. To efficiently remove these unwanted effects, Binder+Co has developed a compact NF-sorting device which identifies metal particles greater ...