- Home
- Equipment
Refine by
Climatronics Environmental Equipment & Supplies
36 equipment items found
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics Motor-Aspirated Solar Radiation Shield, Motor TS-10 (P/N 100325), utilizes a triple-shield design and fan to provide the constant mass flow rate past the sensor(s) necessary to yield accurate temperature values. This shield is superior to a naturally aspirated shield, which relies on the wind conditions for sensor ventilation. Constant flow plus superior protection from incoming ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' capacitive relative humidity sensors, P/N 102273 and 102425 are specifically designed for meteorological monitoring systems. Very low power consumption makes these relative humidity sensors ideal for integration with data acquisition systems operating at remote locations. Both sensors provide a linear 0 - 1 VDC output signal corresponding to 0 - 100% relative ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' LED Digital Displays combine high reliability, moderate cost, rugged construction, and large bright digits to meet the most demanding applications. These rack mountable displays utilize bright red- orange L.E.D. digits. Displays use a passive integration, dualslope, analog to digital conversion technique which provides excellent long-term stability, accuracy, linearity, noise ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
The IMP-855 is a versatile digital data acquisition system designed for environmental monitoring applications. It can function as a stand-alone station or be operated via a computer singly or in a ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Spread spectrum radios spread the normally narrowband information signal over a relatively wide band of frequencies. This allows the communications to be more immune to noise and interference from RF sources such as pagers, cellular phones and ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
The CSDM-A04 provides four independent, continuous, analog outputs for proportional control or driving strip charts. Measured or processed values in the IMP-series of data loggers (IMP-855/865/900/950) are scaled to millivolts and transferred to the CSDM-A04 as digital values. The CSDM-A04 then performs a digital to analog conversion and outputs an analog voltage signal. The output voltage levels ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' capacitive relative humidity sensor (P/N 101812) is specifically designed for meteorological monitoring systems. Very low power consumption makes this capacitive relative humidity sensor ideal for integration with data acquisition systems operating in remote locations. The sensor provides a linear 0 - 1 VDC output signal corresponding to 0 - 100% relative humidity. Energizing the ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics rugged and reliable All-In-One (AIO) Weather Sensor is only slightly larger than a can of tennis balls, yet accurately measures temperature, relative humidity, wind speed and direction, and barometric pressure. Compatible with most data logging systems, the AIO Weather Sensor features low power consumption and a small footprint, an integrated Sonimometer wind sensor, and ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
U.S. Environmental Protection Agency guidelines assist operators of potential air pollution sources in complying with the 1977/1990 Clean Air Act Amendments. Operators are required to gather ambient air quality measurements, including meteorological data, at the site of the new air pollution source to estimate its impact on the vicinity and prevent significant deterioration (PSD) of the existing ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics offers three types of naturally aspirated shields. All are field proven, varying principally in price, materials, and mounting configuration. They are naturally ventilated and designed to our ambient temperature, relative humidity, and dew point temperature sensors in applications where AC power is unavailable or maximum sensor accuracy is not required. The shields may be mounted on ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
The CCOM220 Telephone Modem is an asynchronous modem used for communication between our IMP series of Data Acquisition Systems and an IBM® compatible personal computer over a public, switched telephone network. A Hayes-compatible modem is required at the computer end. The CCOM220 Telephone Modem uses voice-grade telephone lines at data rates up to 115.2 kbps between modem and data logger, ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' Vertical Component Anemometer (P/N 102236) is our latest generation of vertical wind speed sensors. It is an improved product superior in performance and directly interchangeable with our previous versions of component anemometers, P/N 101284 and P/N 101036, both which have been discontinued. Exceptionally low threshold and fast response are achieved through the use of mechanical ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
CLIVIATRCNICS' new Universal Interface Module (P/N 102489), with simultaneous analog. RS-232, and RS-422/485 outputs, provdes an accurate and inexpensive way to connect your PC or data logger to several of Climatronics' (or other) meteorological sensors. When used with Climatronics' 'WeatherView' software it provides a cost effective way to archive and display your meteorological data over a ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' TACMET II Weather Sensor, P/N 102304, is used to provide local weather conditions for the operation of unmanned aerial vehicles (UAVs) in locations where the existing infrastructure does not provide this data. The TACMET II incorporates Climatronics' unique folded-path, low-power sonic anemometer, the Sonimometer™, with a temperature sensor, a fast-response capacitive relative ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' TACMET II Weather Sensor (EMI), P/N 102304, is a second-generation weather sensor, which includes a number of features now possible with new sensor technology resulting from our commitment to product improvement. The TACMET II (EMI) incorporates Climatronics’ new and unique folded-path, low-power sonic anemometer, the Sonimometer, with temperature sensor, a fast-response ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' TACMET II Weather Sensor System (RLST), P/N 102352, is a second-generation weather sensor, which includes a number of features now possible with new sensor technology resulting from our commitment to product improvement. The TACMET II incorporates Climatronics’ new, low-power sonic anemometer, the Sonimometer, with a fast-response capacitive relative humidity sensor, a ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' Precipitation Gauges are ideal for remote locations and harsh environments. Climatronics Precipitation Gauges are a cost effective solution for accurate and reliable unattended continuous measurement of precipitation (rain and snow) in remote locations and the harshest of environments. Well-designed and solidly-built, these rugged precision instruments provide accurate reliable ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
The Hand Held Expeditionary Meteorological Station (HEMS) is a COTS system used to determine surface meteorological conditions. The data can be used in a multitude of applications, both civil and military, anywhere a lightweight, rugged and durable weather station is needed. The system consists of Climatronics’ TACMET II weather station, a rugged personal digital assistant (RPDA), and ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
Climatronics' barometric pressure sensor, P/N 102663, is designed for applications which require accurate pressure measurements at a modest cost. It is a stable transducer using nano-technology, yielding a linear and repeatable sensor with low hysteresis. The digital and analog output signals are directly useable without additional signal conditioning. This P/N 102663 barometric pressure sensor ...
Manufactured by:Met One Instruments Powered by Acoem based inGrants Pass, OREGON (USA)
The CSC115 is a lightweight, portable instrument that can serve as a 2-GB storage device or as a USB-to-CSI/O synchronous device communications (SDC) adapter. When serving as a storage device, the CSC115 allows you to augment your onsite data storage or to transport data between the data logger and PC. As a USB-to-CSIO adapter, the CSC115 supports direct communication between an IMP-series data ...