- Home
- Equipment
Refine by
Enmet Environmental Equipment & Supplies
13 equipment items found
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
Available for Carbon Monoxide (CO), Hydrogen Sulfide (H2S), or Oxygen (O2). The AM-5175 provides a digital display of gas concentration, audio/visual alarms, relay contacts, plus analog and digital outputs. The monitor incorporates electrochemical CO, H2S or O2 ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
EX-5100 is a remote gas monitoring sensor transmitter that incorporates a pellistor or catalytic bead sensor. This sensor consists of a matched pair of elements, one active and the other for compensation. The active bead is coated with a catalyst that, when in contact with a combustible hydrocarbon or solvent, causes the gas or vapor to “burn” or oxidize at concentrations below the ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
MedAir 2200 is a compact, easy to install and operate compressed airline monitor that can continuously and simultaneously monitor up to four gases in real-time using internally mounted sensors. MedAir 2200 is typically configured to monitor hospital compressed air for carbon monoxide, oxygen and dew point. ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
CP-10 is an economical, yet versatile single-channel controller designed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. This controller provides 24 VDC power, audio/visual alarms, alarm relays and other features. CP-10 is easy to install, designed for wall mounting and completely programmable from the front panel membrane ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
CP-60 is a 1, 2, or 3 channel wall mount controller designed for monitoring up to three 4-20 mA inputs from remote gas sensor/transmitters or similar devices. The instrument provides 24 VDC power, audible/visual alarms, alarm ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
The AirGuard is a portable Grade D breathing air system which meets NFPA and OSHA requirements. It combines a three stage filter system which removes oil, water, particulate matter and odors with Carbon Monoxide, differential Dew Point and CFM flow ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
A Multi-Sensor Transportable Analyzer for Medical Gas Verifier/Certifier Field Usage. The MATRIX medical gas verifier is designed for the real-time analysis and verification of hospital gases to ensure compliance with NFPA ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
The CD-1300-ST Sensor/Transmitter is easy to install and maintain. The output signal is 4-20 mA or an optional 0 to 10 volt interface. The isolated power supply eliminates any ground loop or electrical interface problems when multiple units are connected to the same controller. Low power consumption makes the CD-1300-ST suitable for battery-powered applications. Features include a bright ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
ProAir 2200 is a compact, easy to install and operate compressed airline monitor that can continuously and simultaneously monitor up to four gases in real-time using internally mounted sensors. ProAir 2200 can be custom configured to monitor a variety of hazardous gases present in compressed air, including carbon monoxide, oxygen, dew point, carbon dioxide, VOCs, trace hydrocarbons and many other ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
HAZMATCAD™ Series is a handheld instrument that detects and classifies chemical warfare agents, Nerve (G) and Blister (H). When compared to other chemical agent technologies HAZMATCAD™ is designed to be reliable, fast to start up, easy to operate and avoid false alarms from non-target chemicals in the urban environment. The HAZMATCAD™ offers two modes of operation, one for fast ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
HAZMATCAD Plus™ is a multifunction handheld instrument that detects and classifies chemical warfare agents, Nerve (G) and Blister (H), with an integral electrochemical sensor array for Toxic Industrial Chemicals (TIC). When compared to other chemical agent multi threat technologies HAZMATCAD Plus™ is designed to be reliable, fast to start up, easy to operate and avoid false alarms ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
The CW Sentry 3G ambient air monitor detects CWA (Chemical Warfare Agents), nerve and blister and the following TICs (Toxic Industrial Chemicals) hydrogen cyanide, phosgene, halogens, hydride chemical threats in complex urban environments. It is a fully automated system ideally suited for critical infrastructure protection and easily integrated into building control software ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
The GSM-60 is a versatile instrument, which, in addition to having an internal sampling pump and sensors, can also accept inputs from remote gas sensor/transmitters. The system can be custom configured to monitor a variety of conditions, including VOCs, CO, CO2, oxygen, as well as many toxic and other gases. GSM-60 can also be configured on request for reactive gases, including Ozone (O3), ...