- Home
- Equipment
Refine by
Flowserve Environmental Equipment & Supplies
22 equipment items found
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
Flowserve developed the Byron Jackson H2O+ submersible pump and motor quick-delivery program because deep well submersible operators must keep the water flowing. Farmers, golf course superintendents, municipalities, industrial and mining maintenance managers depend on reliable pumping equipment for their daily processes and quick replacement when a failure occurs. This product line features 6, 8 ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The VCT mixed-flow circulating pump is designed for continuous duty wet-pit applications requiring large capacities at relatively low pressures. Often used in power plants, desalination, cooling water, drainage, flood protection and water supply. Pullout and non-pullout designs offered. ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Pumps of the series SIHISuperNova ZLN arehorizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump allows the complete drive unit to be withdrawn from the casing without disturbing the attached pipe work. If a spacer type coupling is used, it is also unnecessary to disconnect the ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
The SPL is ahorizontal, single stage, end suction pump flanged to a bearing pedestal. The volute casing has integral support feet and is fitted with a replaceable wear ring. Wearing parts can be removed from the drive end without disturbing the volute casing and pipe work. An open impeller is fitted as standard but a closed impeller for pumping liquids containing abrasive solids can be fitted if ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
Overhung pump desgined to API610 requirements. Centerline Supported heavy duty design offers optimum operation under high temperature and pressure. Maximum parts interchangeability. Provided optionally with an inducer for low NPSH required ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Horizontal, single-stage volute casingpumps with design features and nominal rating toDIN EN ISO 2858. For pumping of liquids with high temperatures (> 200 ºC) special executions with centre line feet are available upon request. The process design permits dismantling of the complete bearing unit towards the drive end, without the pump casing having to be disconnected from the piping. If a ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Liquid ring vacuum pumps of the series LOH aresingle-stage displacement pumpsof uncomplicated and robust construction with the following particular features likehandling of nearly all gases and vapours, non-polluting due tonearly isothermal compression,oil-free(no lubrication in the working chamber), small quantities ofentrained liquid can be handled, easy maintenance and reliable, low noise and ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Liquid ring vacuum pumps of the series LOH are two-stage displacement pumps of uncomplicated and robust construction with the following particular features like handling of nearly all gases and vapours, non-polluting due to nearly isothermal compression, oil-free (no lubrication in the working chamber), small quantities of entrained liquid can be handled, easy maintenance and reliable, low noise ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
Flowserve DMX-RO high-efficiency membrane feed pumps are engineered using the latest technologies and materials to provide long-lasting, efficient operation in reverse osmosis applications. The DMX-RO pump is built for high-pressure, heavy-duty membrane feed services used typically in seawater reverse osmosis (SWRO) applications. Hydraulics are designed with advanced computational fluid dynamics ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The Worthington DS end-suction, double volute single-stage pump with a back pullout configuration is engineered for a wide variety of industrial services. Developed in accordance with ISO 5199, this versatile foot mounted pump is well-suited for mining, water, desalination, power and general industrial applications requiring lower operating and maintenance costs. Optimized hydraulics combined ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The high capacity Scienco AP-30 air piston pump is ideal for agricultural and industrial services, including herbicides, diesel fuel, gasoline and lubricating oils. It offers users a high degree of reliability, versatility and long life. The AP-30 air piston pump is ruggedly and smartly constructed. With no motor to burn out and with minimal moving parts, AP-30 is extremely reliable and requires ...
Distributed by:Isis Fluid Control Ltd. based inOxfordshire, UNITED KINGDOM
3 -Piece Reduced Ball Valves 69 BAR Rated Product Code(s): ...
Distributed by:J&M Industrial based in, WEST VIRGINIA (USA)
Product Details: * Standard Size: 2x6x4 *100 GPM, 225 TDH, 275 PSI MAWP *7.31"Ø Rated Impeller *12.1 Rated ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Pumps of the series SIHISuperNova ZLK aresingle-stage volute casing pumpswith connections and nominal performances according toEN 733 / DIN 24255, plus 6 additional sizes. The design of the pump allows the complete drive unit to be withdraw from the casing without disturbing the attached pipe work. The close coupled design, also, allows dismantling or replacing the motor without disturbing the ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Pumps of the series ZLI aresingle-stage resp. two-stage pumping units in compact designwith nominal performances according toEN 733 / DIN 24255as well as additional size DN 25, where suction and discharge branch are arranged opposite for direct installation into the pipe work. There is no common shaft for motor and pump. The motors used are of the standard type listed. Thanks to the process ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The Flowserve DS-RO single-stage, end-suction, foot-mounted pump is engineered specifically for auxiliary applications found in reverse osmosis desalination processes. This versatile pump is well-suited for plant support services such as filtered water, low- or high-pressure feed boosting, potable water, backwash and others. Optimized hydraulics and high-alloy materials of construction, like ASTM ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The Scienco CT6 six-chamber diaphragm pump is designed for chemical transfer applications. It is a self-priming pump with wetted parts resistant to many agricultural and industrial chemicals. The CT6 is used primarily to dispense fluids from Bulk or Mini-Bulk tanks, Intermediate Bulk Containers (IBCs), Drums, and for similar containers. The pump can be configured with a variety of brackets, dip ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The Scienco CT6-DEF is a six-chamber diaphragm pump designed for diesel fuel applications. It is a self-priming pump with wetted parts resistant to many agricultural and industrial chemicals. The CT6-DEF is used primarily to dispense diesel fuel from Intermediate Bulk Containers (IBCs). The pump can be configured with a variety of brackets, dip tubes, flow meters, fittings, hoses and valves to ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Standard chemical process pumps of the Mark3 ISO range arehorizontal, single-stage volute casing pumpswith dimensions to ISO 2858. They meet the technical requirements of ISO 5199, ISO 15783. It is a modular configuration of either bare shaft end or close-coupled design. Shaft sealing options are single or double acting mechanical seals or magnetic drive designs. The benefits are the ...
Manufactured by:Flowserve SIHI Germany GmbH based inItzehoe, GERMANY
Liquid ring vacuum pumps of the series LPHX/LPH are single-stage displacement pumps and have a simple but robust construction with the following features and benefits like nearly isothermal compression, oil-free (no internal lubrication), capable of handling almost all gases and vapours, able to handle quantities of liquid “carry over”, low maintenance and safe operation, low noise ...