- Home
- Equipment
Refine by
Geonor Environmental Equipment & Supplies
12 equipment items found
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
Geonor's automatic and proprietary precipitation gauges provide accurate and reliable measurements of the amount and intensity of precipitation in any form. They contain no moving parts and require minimal maintenance. Geonor's precipitation sensors have gained a large international market, and are particularly popular in cold regions. More than 3,000 systems and more than 5,000 OEM sensors have ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
54mm sampler, plastic cylinder, K-100 Effective sample length for the K-100 model is 700 mm. The sampler can be used on drilling rigs without dismantling the rods and sampler between each sampling. The K-100 model is equipped with interchangeable edges. A thin-walled edge for undisturbed samples in silt and clay, and a coarse edge for sandy soils. Sample catcher can be used together with the ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
M-207 Hydraulic piezometer is further developed from M-206. The piezometer can be pressed down without pre-drilling, normally to a depth of approx. 30 m. Designed for Ø32 mm extension ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
New type, simplified, more robust. For pressing down, can be used directly without pre-drilling. Made for 1" water pipes. Quick to install in soft ground. Short response time. Accuracy better than 0.5% of full scale. Measuring range 2 to 6 bar. ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
The P-520N frequency counter is the read-out instrument for all GEONOR vibrating-wire transducers. The counter is designed for use in situ and is enclosed in a rigid aluminium housing. The display shows the frequency of vibration in 0,1Hz, which has to be calculated to physical units using a calibration table. It is powered by a rechargeable 12 V NiCd ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
The Fall Cone apparatus, first introduced in 1915, provides a rapid, simple and accurate method for determining empirically the undrained shear strength, the shear strength of remoulded samples and thus the sensitivity of clays. The equipment is also used for determination of liquid limit WL (or fineness number WF). Four cones of different weight and apex angle are provided. The diagram shows the ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
K- 200 54mm sampler, steel cylinder, The K-200 model is supplied with a steel sample cylinder. Sample length 500 to 800 ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
The Field Vane Shear Test (FVST) is a crucial field instrument and the preferred method for geotechnical engineers performing in-situ soil testing. It is the most commonly used technique for measuring the undrained shear strength (a key aspect of shear strength) of soft clay to stiff clay. For preliminary field inspection of soft clays, utilizing a hand-held vane shear test device is both ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
Designed for direct installation. Well suited for use in ponds, landfills, environmental wells, etc. Stainless steel housing, other materials such as titanium can be supplied on request. Measuring range 2 to 30 bar. Supplied with armored cable (FERE). ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
The field vane shear test (FVST) is a pivotal field instrument in geotechnical engineering, offering the most widely used method for in situ soil testing and field inspection. It provides a direct measurement of the undrained shear strength and sensitivity of soft clays. While primarily utilized for clay, the FVST can also offer insights into fine-grained soils like silt and, to a lesser extent, ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
The field vane shear test (FVST) is the most widely used method for measuring the undrained shear strength of soft clays in situ. A preliminary test with an inspection vane is economical, relevant, and provides quick, repeatable data for planning more detailed surveys. However, to obtain reliable results, your equipment must meet three requirements: 1. Avoid Soil Disturbance: The tester must ...
Premium
Manufactured by:Geonor AS based inØsterås, NORWAY
The M-603 is a special version of the M-600, which is open to atmosphere and equipped with a rubber membrane over the pressure membrane. Using compressed air, a back pressure is applied to relieve the pressure membrane. This will balance against the pressure during depressurization and thus the pore pressure gauge can be depressed faster. The back pressure can also be used to relieve the membrane ...